|
09-05-2011, 04:46 PM | #1 |
EZ2NV :)
Join Date: Jun 2009
Location: Gainesville, Georgia
Posts: 617
|
Looking at longtubes
according to greg if i want good longtubes i should look to spend 700+ on them,
however i was curious about some brands i found i know he had bbk on his old gt and never mentioned any issues with them and a guy he knew had pacesetter on his camaro so my question is could you guys please look at these two i found and let me know if they would be good choices and if so which would be the best choice out of the two or give me an idea on other brands that would be good but with a reasonable price tag BBK http://cgi.ebay.com/ebaymotors/BBK-9...6#ht_500wt_903 Pacesetter http://cgi.ebay.com/ebaymotors/Paces...ht_1493wt_1165
__________________
'04 Competition Orange Mach 1 Kooks longtubes Kooks O/R X pipe Magnaflow Magnapack Catback K&N Cold Air Intake 18'' CCWs TO BE CONTINUED...
|
09-05-2011, 04:58 PM | #2 |
LuLz
Join Date: Dec 2003
Location: Cedar Park, TX
Posts: 19,294
|
Re: Looking at longtubes
id go BBK over the pacesetters
__________________
11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away) |
09-05-2011, 07:04 PM | #3 |
WNTAMACH1
Join Date: Dec 2008
Location: New Orleans, LA
Posts: 2,394
|
Re: Looking at longtubes
I bought used ceramic BBK's, I love them and have no complaints.
__________________
2004 Ford Mustang Mach 1-315 RWHP/ 336 RWTQ 2013 Ford Mustang GT 5.0 Auto- 421/406 SOLD 2013 Ford Taurus SHO PP - Daily Driver |
09-05-2011, 07:19 PM | #4 |
Registered User
Join Date: Mar 2007
Location: spring tx
Posts: 622
|
Re: Looking at longtubes
My pace setters fit great and sound great.
__________________
2004 TR Mach 1 |
09-06-2011, 11:55 AM | #5 |
"Stream-line Butterfly"
Join Date: Jun 2005
Location: Where its summer 3 months out of the year, PA
Posts: 690
|
Re: Looking at longtubes
I have this combo, Mac ceramic coated longtubes and midpipe and I love them! Fit and look great, make good power, and reasonable priced.
Headers http://www.lethalperformance.com/exh...headers-p-1488 Midpipe http://www.lethalperformance.com/03-...eaders-p-15157
__________________
03 TR Cobra |
09-06-2011, 12:09 PM | #6 |
Registered User
Join Date: Apr 2004
Location: B'ham, AL
Posts: 408
|
Re: Looking at longtubes
Look around for a set of used headers that are in good shape and save yourself some money (thats what I did). There are plenty of used sets out there now that the new edge mustangs have some years on them. If you are patient you can find a really good deal.
__________________
2003 Oxford White Mach 1 Auto |
09-06-2011, 01:12 PM | #7 |
2013 5.0
Join Date: Jan 2006
Location: Houston, Tx
Posts: 2,245
|
Re: Looking at longtubes
get mac ceramic coated longtubes and mid pipe from stangmods. i got mine for a great price there.. i love them. best mod i have done so far
__________________
https://youtu.be/FGEHkAtgNb8 Cars owned: 2016 guard green 5.0 bagged on copper rovos DAILY 2004 manual CO Mach 1 SOLD 2013 Perf. white A6 5.0, recaro's, full exhaust 2004 CO auto Mach 1.bagged. full bolt on, full exhaust, Slammed & Cammed! 341/310 WEEKEND CAR 2001 Mineral Grey GT. few bolt ons. WRECKED 1998 Laser Red V6. wheels and exhaust. SOLD |
09-06-2011, 08:26 PM | #8 |
Registered User
Join Date: Oct 2007
Location: Orlando, FL
Posts: 1,065
|
I got MAC Longtubes used off of a fellow member and modified my existing MAC Prochamber to accept longtubes rather than the shorties it was intended for. With my Borla exhaust, it sounds downright scary and they look as good today as they did the day I picked them up.
Sent from my Evo
__________________
03 Mach (Auto) JLT RAI - 1/2" Intake Spacer - Mac longtubes - Mac Prochamber - Borla cat-back - PA Racing k-member - Energy Suspension motor mounts - Eibach Sportline springs - Eibach anti-roll kit - SPC caster/camber kit - Steeda X2 ball-joints - Steeda strut tower bar - Eibach 1" wheel spacers (rear only) |
09-06-2011, 08:29 PM | #9 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Looking at longtubes
[QUOTE=MACH_CHICK;1419991]according to greg if i want good longtubes i should look to spend 700+ on them,
however i was curious about some brands i found i know he had bbk on his old gt and never mentioned any issues with them and a guy he knew had pacesetter on his camaro so my question is could you guys please look at these two i found and let me know if they would be good choices and if so which would be the best choice out of the two or give me an idea on other brands that would be good but with a reasonable price tag i have a set of mac lt's on my car, no fitment issues, ground clearence is great and im running eibach sportline springs. they make great power
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
09-06-2011, 09:28 PM | #10 |
AUTOMACHTIC
Join Date: Oct 2007
Location: RTP/ N.C.
Posts: 4,813
|
Re: Looking at longtubes
__________________
UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112 |
09-10-2011, 05:15 AM | #11 |
Registered User
Join Date: Jun 2009
Location: Bowling Green, KY
Posts: 377
|
Re: Looking at longtubes
I'd go with the BBK longtubes. Had a pair on my 99 gt and they fit and sounded great. I just bought a chrome set for my mach for $380 shipped from a dealer on corral.net I think the ceramics were like $490.
__________________
2003 Azure blue mach 1: JLT RAI, MGW orange handle shifter, BBK L/T headers, BBK off-road h-pipe, Borla stinger catback, Comp cams 106160's 18x9 and 18x10 Black 2010 GT-500 wheels, FMS 4.10 gears, FRPP "C" springs, and Maxim motorsports C/C plates. 352rwhp and 312rwtq |
09-10-2011, 12:00 PM | #12 |
Registered User
Join Date: Sep 2009
Location: jacksonville fl
Posts: 224
|
Re: Looking at longtubes
i was gonna buy the Mac's but everywhere i went they were on back order. so I went with pacesetter LT's and they fit great and they def make the car sound alot better. ill be getting dyno'd next week to see the gains. i feel that mac/pacesetter/ and BBK are all good brands to go with.
__________________
built 290 stroker | 150shot | driver mod |
09-11-2011, 05:50 AM | #13 | |
Registered User
Join Date: Oct 2006
Location: kaneohe, HI
Posts: 319
|
Re: Looking at longtubes
Quote:
__________________
03, auto, white/blk, 4:10's, c&l mass air/intake, bassani off rd-x, Borla c-back, Steeda sport springs, Max motorsports C C plates, 1" shaker ext, ported manifold, 18x9/10 blk fr500's, 255-40(Invo's)/295-35 (NT05's), BC-auto 3600 TC/trans cooler/built 4R70W trans... SCT tuned. |
|
09-11-2011, 11:05 AM | #14 |
WNTAMACH1
Join Date: Dec 2008
Location: New Orleans, LA
Posts: 2,394
|
Re: Looking at longtubes
BTW, you can find BBK's cheaper than in that ebay ad.
__________________
2004 Ford Mustang Mach 1-315 RWHP/ 336 RWTQ 2013 Ford Mustang GT 5.0 Auto- 421/406 SOLD 2013 Ford Taurus SHO PP - Daily Driver |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|