|
|
Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here! |
|
Thread Tools | Display Modes |
12-09-2017, 09:26 PM | #1 |
Newb
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
|
MHS stage 3 Turbo 4v cams
SOLD!
Up for sale is a set of Modular Head Shop 4v Stage 3 Turbo cams. I bought a built engine on here not long ago, and this coming spring I plan to install it. the guy I bought it from was doing a turbo build, but I will be going with supercharger cams instead. I am planning to wait until spring to swap the cams, but if necessary I could get it done sooner. These are brand new, they've only been installed, haven't been ran. Looking to get $750 for the set. here are the stats according to Modular Head Shop's site: Part Number MHS-4V-STG3-T Name 4V Stage 3 Turbo Duration @ .050" 232 / 232 Lift .480" / .480" Lobe Sep Angle 115 + 5 Center Lines 110 / 120 Springs Required? Yes Suggested Valve Springs MHS / PAC Stage 3 or Stage 4 Valve Reliefs Required? No These camshafts will support over 1200 WHP while still having excellent street manners. Ported Heads with matching valve job recommended. Stock, unported 03 / 04 Cobra and Mach 1 Heads OK. Single Groove valves recommended due to RPM Range. Designed for Larger Mid-Frame T4 or T6 Single Turbo with larger turbine wheel. 76/75 - 88/84 Single or 67/66 - 68/70 Twins. Ported Short Runner, Sullivan Single Plane or Hogan sheet metal Intake Manifold suggested. Shift points will be 7800 - 8200 RPM depending on Turbo / Intake combination. Will support up to 30lbs of boost. Built 4R70W, TH400 or Powerglide w/ Brake and 3400 - 3800 stall suggested. For larger Single Turbo applications that may have some trouble spooling up, we suggest tightening up the LSA to 113. You will still want to run 5 Degrees of advance making your center lines 108 / 118.
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi -Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff Red 2007 Focus ST, daily driver, 236hp/234tq @10psi -FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs Last edited by FenixFallen; 10-11-2018 at 09:52 PM. Reason: SOLD |
03-31-2018, 09:00 PM | #2 |
Newb
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
|
Re: MHS stage 3 Turbo 4v cams
Bump. I will be swapping these out within the next couple weeks or so, starting my engine swap project. If anyone is doing a turbo build make an offer!
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi -Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff Red 2007 Focus ST, daily driver, 236hp/234tq @10psi -FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs |
07-04-2018, 10:44 AM | #3 |
Newb
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
|
Re: MHS stage 3 Turbo 4v cams
Finally got the supercharger cams, took a lot longer than I wanted. These are available now. here are some pics.
There is some slight surface rust in a few spots, perhaps there wasn't enough assembly lube used. I have cleaned them up some with neveRdull and re-coated them with assembly lube, wrapping them in the packaging the new ones came with.
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi -Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff Red 2007 Focus ST, daily driver, 236hp/234tq @10psi -FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs Last edited by FenixFallen; 08-15-2018 at 08:51 AM. Reason: adding pics |
08-08-2018, 08:31 PM | #4 |
Newb
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
|
Re: MHS stage 3 Turbo 4v cams
Bump, these are still available. more pics upon request.
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi -Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff Red 2007 Focus ST, daily driver, 236hp/234tq @10psi -FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs |
08-15-2018, 08:50 AM | #5 |
Newb
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
|
Re: MHS stage 3 Turbo 4v cams
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi -Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff Red 2007 Focus ST, daily driver, 236hp/234tq @10psi -FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs |
09-16-2018, 11:27 AM | #6 |
Newb
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
|
Re: MHS stage 3 Turbo 4v cams
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi -Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff Red 2007 Focus ST, daily driver, 236hp/234tq @10psi -FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs |
10-11-2018, 09:51 PM | #7 |
Newb
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
|
Re: MHS stage 3 Turbo 4v cams
Sold
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi -Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff Red 2007 Focus ST, daily driver, 236hp/234tq @10psi -FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|