2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 09-20-2011, 08:33 AM   #26
Shane@TM
Toledo Mustangs
 
Shane@TM's Avatar
 
Join Date: Sep 2008
Location: toledo, ohio
Posts: 1,433
Re: Official Turbo HP/TQ Thread

Turbo Manfacturer: Master Power T-76 / On3 Forward Facing
Single or Twin or Hellraiser: Single
A/R Type: .69
Stock or Modified Cold Side Piping: Kit
Stock or Modified Downpipe: Kit
Heads: Stock
Intake Type: Stock
Boost: 18~19PSI
Boost Controller Type: Electronic or Manual:Manual (Hallman)
Electric Cut Out, Yes or No: No
Wastegate: Open or Closed: Open
Intercooler: Stock or Modified: Stock
Timing: How Much? 17* at WOT
Cams: Stock
Engine Mods: Built MMR 900, 9.6:1 CR
Headers: Tubular
Gas: Pump of Race: e85
Start Spool: 3800
Full Spool: 4200
RWHP: 660
RWTQ: 660
Type of Dyno Used: Mustang or DynoJet: Mustang
Draw Thru or Blow Thru: Blow Thru
Air Fuel Ratio: 7.1
__________________
Toledo Mustang Club
Under the knife AGAIN!
"The more you mod it, the more it breaks"
CRT PERFORMANCE TUNED
Shane@TM is offline   Reply With Quote
Old 10-15-2011, 07:58 AM   #27
N/AKing
Registered User
 
N/AKing's Avatar
 
Join Date: Jun 2008
Location: Maumee, Ohio
Posts: 424
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by Shane@TM View Post
Turbo Manfacturer: Master Power T-76 / On3 Forward Facing
Single or Twin or Hellraiser: Single
A/R Type: .69
Stock or Modified Cold Side Piping: Kit
Stock or Modified Downpipe: Kit
Heads: Stock
Intake Type: Stock
Boost: 18~19PSI
Boost Controller Type: Electronic or Manual:Manual (Hallman)
Electric Cut Out, Yes or No: No
Wastegate: Open or Closed: Open
Intercooler: Stock or Modified: Stock
Timing: How Much? 17* at WOT
Cams: Stock
Engine Mods: Built MMR 900, 9.6:1 CR
Headers: Tubular
Gas: Pump of Race: e85
Start Spool: 3800
Full Spool: 4200
RWHP: 660
RWTQ: 660
Type of Dyno Used: Mustang or DynoJet: Mustang
Draw Thru or Blow Thru: Blow Thru
Air Fuel Ratio: 7.1



Car is super quiet until he hits boost
__________________
Catback only......12.9 @ 106 w/ 1.8 60ft

P1SC 435whp 407torque---11.90 @ 119
CRT-Performance Tuned (Norwalk, Ohio)
N/AKing is offline   Reply With Quote
Old 12-19-2011, 10:27 PM   #28
andre
Registered User
 
Join Date: Jun 2011
Location: gatineau quebec
Posts: 6
Re: Official Turbo HP/TQ Thread

Has anyone use this turbo O3P 4.6 Mustang Cobra 2001 Single Turbo Kit DOHC 01 on the mach1
andre is offline   Reply With Quote
Old 12-19-2011, 10:31 PM   #29
andre
Registered User
 
Join Date: Jun 2011
Location: gatineau quebec
Posts: 6
Re: Official Turbo HP/TQ Thread

O3P 4.6 Mustang Cobra 2001 Single Turbo Kit DOHC 01

Show full item description
Time left: Ended
Price: $1,799.00
Shipping: $99.00
Location: Sunbury, Ohio
Ships to: US
Condition: New
Payment: PayPal
Item #: 130616259844
andre is offline   Reply With Quote
Old 12-20-2011, 01:31 AM   #30
Mach828
Dark Knight
 
Mach828's Avatar
 
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
Re: Official Turbo HP/TQ Thread

Ya. Shane who posted right above you, and ModularSpeed.
__________________

Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods.

Tuned by me with SCT Advantage
Mach828 is offline   Reply With Quote
Old 04-05-2012, 07:31 PM   #31
Chingadera
Registered User
 
Join Date: May 2010
Location: Corpus Christi, Tx
Posts: 29
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by andre View Post
Has anyone use this turbo O3P 4.6 Mustang Cobra 2001 Single Turbo Kit DOHC 01 on the mach1
I did theres a few pics in the wheel and tire section
Chingadera is offline   Reply With Quote
Old 04-23-2012, 08:39 PM   #32
andre
Registered User
 
Join Date: Jun 2011
Location: gatineau quebec
Posts: 6
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by Chingadera View Post
I did theres a few pics in the wheel and tire section
So how do like the turbo how much boost r u running at thank
andre is offline   Reply With Quote
Old 07-07-2012, 09:53 PM   #33
iggster
Registered User
 
Join Date: May 2010
Location: lbc
Posts: 56
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by andre View Post
Has anyone use this turbo O3P 4.6 Mustang Cobra 2001 Single Turbo Kit DOHC 01 on the mach1
I ran a bone stock kit with a master power t70 and put down 734, I upgraded the turbo to a t76 turbonectics and put down 742... BS but we only had the boost at 21lbs and after that we have took the car to 29lbs. Only thing is we have only took it that high after the auto swap. It put down 668 through a c4 11.0 air fuel and 16* timing using the stock on 3 blow off valve and wastegate @ 21lbs. We just modified the hotside some.

I changed the wastegate (to control boost better) and below are the results.

Turbo Manfacturer: on 3
Single or Twin or Hellraiser: single
A/R Type: .96
Stock or Modified Cold Side Piping:stock
Stock or Modified Downpipe:modified
Heads:modified
Intake Type:stock
Boost:28
Boost Controller Type: Electronic or Manual: eboost 2
Electric Cut Out, Yes or No:no
Wastegate: Open or Closed: open
Intercooler: Stock or Modified: stock
Timing: How Much? 18*
Cams: 98 cobra
Engine Mods: 9.7:1 C/R blue printed balanced, coated pistons arp 2000 etc
Headers: stock
Gas: Pump of Race. c16
Start Spool: 4,500
Full Spool: 5,500
RWHP:837
RWTQ:683
Type of Dyno Used: Mustang or DynoJet:dynojet
Draw Thru or Blow Thru:blow through
Air Fuel Ratio: 11.5
iggster is offline   Reply With Quote
Old 10-29-2012, 01:00 PM   #34
Roy
Registered User
 
Roy's Avatar
 
Join Date: Jul 2005
Location: S.E. Mich.
Posts: 3,446
Re: Official Turbo HP/TQ Thread

Updated:


Turbo Manfacturer: Roy Built
Single GT4788 1.23 A/R T6
Downpipe: 5" splits into (2) 4" pipes that dump behind the front tires. All 6061 aluminum.
Heads: Fox Lake CNC ported
Intake Type: Modified Stock
Boost:24lbs
Boost Controller Type: None
Wastegate: Open or Closed: Open
Intercooler: 2K HP A/W
Timing: How Much? 16
Cams: Custom HP Turbo cams
Engine Mods:Forged .020" over bore
Headers: Self built 304 ss forward facing
Gas: Pump or Race: 110
Start Spool:
Full Spool:
RWHP: 1024
RWTQ: 743
Type of Dyno Used: Mustang or DynoJet: DynoJet
Draw Thru or Blow Thru: N/A
Air Fuel Ratio: 11.0:1
Roy is offline   Reply With Quote
Old 11-06-2012, 01:05 PM   #35
Shane@TM
Toledo Mustangs
 
Shane@TM's Avatar
 
Join Date: Sep 2008
Location: toledo, ohio
Posts: 1,433
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by Roy View Post
Updated:


Turbo Manfacturer: Roy Built
Single GT4788 1.23 A/R T6
Downpipe: 5" splits into (2) 4" pipes that dump behind the front tires. All 6061 aluminum.
Heads: Fox Lake CNC ported
Intake Type: Modified Stock
Boost:24lbs
Boost Controller Type: None
Wastegate: Open or Closed: Open
Intercooler: 2K HP A/W
Timing: How Much? 16
Cams: Custom HP Turbo cams
Engine Mods:Forged .020" over bore
Headers: Self built 304 ss forward facing
Gas: Pump or Race: 110
Start Spool:
Full Spool:
RWHP: 1024
RWTQ: 743
Type of Dyno Used: Mustang or DynoJet: DynoJet
Draw Thru or Blow Thru: N/A
Air Fuel Ratio: 11.0:1
show off.
__________________
Toledo Mustang Club
Under the knife AGAIN!
"The more you mod it, the more it breaks"
CRT PERFORMANCE TUNED
Shane@TM is offline   Reply With Quote
Old 11-14-2012, 07:33 PM   #36
jaysmachone
Mad Hatter
 
jaysmachone's Avatar
 
Join Date: Dec 2007
Location: Hopewell junction NY
Posts: 288
Re: Official Turbo HP/TQ Thread

Quote:
Originally Posted by Roy View Post
Updated:


Turbo Manfacturer: Roy Built
Single GT4788 1.23 A/R T6
Downpipe: 5" splits into (2) 4" pipes that dump behind the front tires. All 6061 aluminum.
Heads: Fox Lake CNC ported
Intake Type: Modified Stock
Boost:24lbs
Boost Controller Type: None
Wastegate: Open or Closed: Open
Intercooler: 2K HP A/W
Timing: How Much? 16
Cams: Custom HP Turbo cams
Engine Mods:Forged .020" over bore
Headers: Self built 304 ss forward facing
Gas: Pump or Race: 110
Start Spool:
Full Spool:
RWHP: 1024
RWTQ: 743
Type of Dyno Used: Mustang or DynoJet: DynoJet
Draw Thru or Blow Thru: N/A
Air Fuel Ratio: 11.0:1
OK Roy.......no more stats please........You're giving me wood and it's making my wife jealous!
jaysmachone is offline   Reply With Quote
Old 11-14-2012, 09:46 PM   #37
Roy
Registered User
 
Roy's Avatar
 
Join Date: Jul 2005
Location: S.E. Mich.
Posts: 3,446
Re: Official Turbo HP/TQ Thread

Itll make 1200 in the spring if the block and/or crank dont break.
Roy is offline   Reply With Quote
Old 11-14-2012, 11:33 PM   #38
my fear
oooooo snaaps....
 
my fear's Avatar
 
Join Date: Jun 2007
Location: DALLAS, TX
Posts: 592
Re: Official Turbo HP/TQ Thread

Turbo Manufacturer:precision 7675 billet wheel
Single or Twin or Hellraiser:single
A/R Type:
Stock or Modified Cold Side Piping: stock
Stock or Modified Downpipe:a little modified to fit
Heads:stock unported
Intake Type: stock ported by roy
Boost:4lbs
Boost Controller Type: Electronic or Manual: non for now eboost2 in about a month
Electric Cut Out, Yes or No:no
Wastegate: Open or Closed: open
Intercooler: Stock or Modified: stock
Timing: How Much? unsure
Cams:97 cobra cams
Engine Mods: intake spacer and 97 cobra cams
Headers: stock manifolds
Gas: Pump of Race 93 octane
Start Spool:
Full Spool:
RWHP:390
RWTQ:422
Type of Dyno Used: Mustang or DynoJet: dynojet
Draw Thru or Blow Thru:
Air Fuel Ratio: 11.80
__________________
2003 DSG mach 1:best 1/4-12.81 at 106.0 spinning, new times soon.
Performance: HPP tuned 390hp and 422trq on 4lbs
precision 7675 billet wheel turbo kit...FRPP 4.10...RAM Powergrip clutch...SPEC billet steel flywheel...MGW shifter...FIORE quadrant...Steeda firewall adjuster...Roy's 1/2" intake spacer...EGR delete...HPM megabite Jr. upper and lower arms.
Looks: 03 Cobra wheels...03 Sideskirts...01 Tail lights...01 Front bumper
my fear is offline   Reply With Quote
Old 01-27-2013, 01:51 AM   #39
JL.Tuning
Registered User
 
Join Date: Jul 2008
Location: Saint Petersburg, FL
Posts: 104
Post Re: Official Turbo HP/TQ Thread

Turbo Manfacturer: Bullseye Performance BW
Single or Twin or Hellraiser: Single BEP S366 Billet
A/R Type: .7 t3
Stock or Modified Cold Side Piping: Custom LMS
Stock or Modified Downpipe: Custom LMS
Heads: 05 C head, casting/bowl PnP
Intake Type: Custom LMS
Boost: 10.5 PSI/14falls to 12 PSI
Boost Controller Type: Electronic or Manual: Manual
Electric Cut Out, Yes or No: NO
Wastegate: Open or Closed: Open
Intercooler: Stock or Modified: 4"x12"x24"
Timing: How Much? 15* / 19*
Cams:FR500, 112icl/116lsa idles stock
Engine Mods: Livernois spec 5.4 -3cc Diamond piston, manley rod, stock crank. 10:1 compression.
Headers: Forward facing manifolds
Gas: Pump of Race 93/110sunoco
Start Spool: 2300
Full Spool: 2600 brake boosting 3500 roll on dyno
RWHP:608/716
RWTQ:512/627
Type of Dyno Used: Mustang or DynoJet: Dynojet
Draw Thru or Blow Thru: Blow thru
Air Fuel Ratio: 11.2-11.8
Attached Thumbnails
jm93-110pic.jpg  
__________________
Joshua Levin

DSG 2003 mach 1 JLT intake, stock intake manifold, stock exhaust manifolds O/R H-pipe w/magnaflows.
329 rwhp / 325rwtq SAE dynojet 93 octane 12.4 A/F.

SCT, DiabloSport, HP Tuners, Sniper/Delta Force, Tunercats, Bigstuff, AEM, Accel, Fast, Electromotive, Megasquirt, most aftermarket tuning devices, PM for details. In house DynoJet 224x
JL.Tuning is offline   Reply With Quote
Old 05-17-2013, 01:43 AM   #40
02gtvertible
Registered User
 
02gtvertible's Avatar
 
Join Date: Apr 2012
Location: glasgow ky
Posts: 440
Re: Official Turbo HP/TQ Thread

Turbo Manfacturer: on3
Single or Twin or Hellraiser:single
A/R Type: .70 t4
Stock or Modified Cold Side Piping: on3
Stock or Modified Downpipe: on3
Heads: stock
Intake Type: stock with 1/2 spacer
Boost:6.5
Boost Controller Type: Electronic or Manual:manual
Electric Cut Out, Yes or No:no
Wastegate: Open or Closed: open
Intercooler: Stock or Modified: on3
Timing: How Much? unsure
Cams:stock
Engine Mods:none
Headers: stock manifolds
Gas: Pump of Race: 93
Start Spool: 3000
Full Spool:3800-4000ish
RWHP:459
RWTQ:469
Type of Dyno Used: Mustang or DynoJet: superflow (numbers are converted to dynojet numbers)
Draw Thru or Blow Thru:blow thru
Air Fuel Ratio:11.5
__________________
03 azure blue mach1-on3 70mm 459/469 on 6.5 psi
Speedy tuned
02gtvertible is offline   Reply With Quote
Old 04-10-2014, 11:08 PM   #41
Flash88
Registered User
 
Join Date: Jul 2011
Location: jacksonville
Posts: 664
Re: Official Turbo HP/TQ Thread

Had boost controller problems first dyno tune i went. changed the spring in the MBC and fixed all the leaks. gonna go back with more boost (15-17#'s). Hopefully i can get near 650whp

Single or Twin or Hellraiser: SINGLE ON3 70MM
A/R Type: .96
Stock or Modified Cold Side Piping: CX RACING
Stock or Modified Downpipe: 3" OPEN DOWNPIPE
Heads: STOCK
Intake Type: STOCK
Boost: 10#'S
Boost Controller Type: Electronic or Manual: HALLMAN IN-CAR MBC
Electric Cut Out, Yes or No: NO
Wastegate: Open or Closed: OPEN
Intercooler: Stock or Modified: STOCK
Timing: How Much? -----
Cams: STOCK
Engine Mods: 04 SHORT BLOCK
Headers: ON3
Gas: Pump of Race: PUMP 93
Start Spool:3400
Full Spool:3800
RWHP: 510
RWTQ:480 (BOOST.EXHAUST LEAKS)
Type of Dyno Used: Mustang or DynoJet: DYNOJET
Draw Thru or Blow Thru: BLOW THRU VMP
Air Fuel Ratio:11.2
__________________
___________________________
70mm single turbo.
Flash88 is offline   Reply With Quote
Old 05-03-2014, 11:57 AM   #42
JL.Tuning
Registered User
 
Join Date: Jul 2008
Location: Saint Petersburg, FL
Posts: 104
Re: Official Turbo HP/TQ Thread

Turbo Manfacturer: BEP 68mm Batmo wheel
Single or Twin or Hellraiser: Single
A/R Type: 0.7 T3
Stock or Modified Cold Side Piping: Custom 3" aluminum
Stock or Modified Downpipe: Custom 3.5" to 2x2.5 and electric cut out
Heads: 03 mach 1 ported
Intake Type: LMS short runner
Boost: 21
Boost Controller Type: Electronic or Manual: Electric, integrated into AEM infinity
Electric Cut Out, Yes or No: Yes
Wastegate: Open or Closed: Open
Intercooler: Stock or Modified: Treadstone 1300HP
Timing: How Much? 12.5
Cams: LMS custom
Engine Mods: 99 teksid, Manly Hbeam, CP 9.3:1 piston
Headers: Log style
Gas: E75
Start Spool: 2400 on street 7lbs by 2700 on dyno
Full Spool: 3000 on street 4200 on dyno
RWHP: 800 SAE
RWTQ: 731 SAE
Type of Dyno Used: Mustang or DynoJet: Dynojet
Draw Thru or Blow Thru: Speed density
Air Fuel Ratio: 8.3


run 32 13.5 lbs + 100shot 15*
run 35 21.5 lbs turbo is out of breath 12.5*
run 38 21.5 lbs + 100shot 11*

Turbo holds 17.5 lbs without nitrous at 7500 and 18.8 at 7500 while nitrous is engaged.

Josh.
__________________
Joshua Levin

DSG 2003 mach 1 JLT intake, stock intake manifold, stock exhaust manifolds O/R H-pipe w/magnaflows.
329 rwhp / 325rwtq SAE dynojet 93 octane 12.4 A/F.

SCT, DiabloSport, HP Tuners, Sniper/Delta Force, Tunercats, Bigstuff, AEM, Accel, Fast, Electromotive, Megasquirt, most aftermarket tuning devices, PM for details. In house DynoJet 224x
JL.Tuning is offline   Reply With Quote
Old 01-01-2016, 12:16 AM   #43
AzAzure03
Registered User
 
Join Date: Jul 2014
Location: Mesa, AZ
Posts: 46
Re: Official Turbo HP/TQ Thread

Just purchased built block and precision 7675 so new numbers soon!!


Turbo Manfacturer: On3 70mm
Single or Twin or Hellraiser: Single
A/R Type: .96
Stock or Modified Cold Side Piping: On3
Stock or Modified Downpipe: Modified On3 bumper exit
Heads: Stock
Intake Type: Stock Mach 1
Boost: 9psi
Boost Controller Type: Electronic or Manual: manual
Electric Cut Out, Yes or No: No
Wastegate: Open or Closed: Closed
Intercooler: Stock or Modified: On3 3"
Timing: How Much? Not sure
Cams: Stock
Engine Mods: None
Headers: On3
Gas: Pump 91 (lethal budget return with 42lb)
Start Spool: Don't remember
Full Spool: Don't remember
RWHP: 473
RWTQ: 444
Type of Dyno Used: Mustang
Draw Thru or Blow Thru: Draw Thru
Air Fuel Ratio: 10.8

Last edited by AzAzure03; 01-13-2016 at 11:21 AM.
AzAzure03 is offline   Reply With Quote
Old 01-01-2016, 01:08 AM   #44
01yellerCobra
Registered User
 
Join Date: Jan 2013
Location: San Diego, CA
Posts: 1,104
12.3 A/F? Why so lean?

Misspelling brought to you by Tapatalk
__________________
New Ride:
2004 Mystichrome Cobra-Accufab SBTB and plenum, Steeda 2.8" upper, Bassani X, Borla Stingers, Mcleod RXT, MGW shifter, Level 5 halfshafts, chrome FR500's, Stiffler's FIT system and DS safety loop, GT pumps, BA3000, tuned by owner
01yellerCobra is offline   Reply With Quote
Old 01-01-2016, 01:46 AM   #45
seanbo98
Registered User
 
Join Date: Jun 2015
Location: Longwood
Posts: 140
Isn't 12.3 relatively rich? Maybe not by forced induction standards though I guess

Sent from my SAMSUNG-SM-N920A using Tapatalk
seanbo98 is offline   Reply With Quote
Old 01-01-2016, 12:57 PM   #46
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Official Turbo HP/TQ Thread

Target should be mid 11s. That's a lot of power if it was on a Mustang dyno. Build the bottom already?
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 01-13-2016, 11:19 AM   #47
AzAzure03
Registered User
 
Join Date: Jul 2014
Location: Mesa, AZ
Posts: 46
Re: Official Turbo HP/TQ Thread

I was wrong about the a/f ratio, it was 10.8
AzAzure03 is offline   Reply With Quote
Old 01-13-2016, 04:47 PM   #48
Explosive
Registered User
 
Explosive's Avatar
 
Join Date: Jul 2010
Location: Michigan
Posts: 876
Re: Official Turbo HP/TQ Thread

ugh i want boost, i need to buy a hotside and stash it away for a rainy day
Explosive is offline   Reply With Quote
Old 04-05-2016, 08:59 PM   #49
AzAzure03
Registered User
 
Join Date: Jul 2014
Location: Mesa, AZ
Posts: 46
Re: Official Turbo HP/TQ Thread

New dyno numbers next Tuesday with the built short block and Precision 7675 91/torco. Then when I get back from Fab Fords I will go in for an E85 tune.
AzAzure03 is offline   Reply With Quote
Old 06-05-2017, 09:09 PM   #50
WNTAMACH1
WNTAMACH1
 
WNTAMACH1's Avatar
 
Join Date: Dec 2008
Location: New Orleans, LA
Posts: 2,394
Re: Official Turbo HP/TQ Thread

How has the install of the On3 kit been for everyone? Thanks!
__________________
2004 Ford Mustang Mach 1-315 RWHP/ 336 RWTQ

2013 Ford Mustang GT 5.0 Auto- 421/406 SOLD

2013 Ford Taurus SHO PP - Daily Driver
WNTAMACH1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:22 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<