2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 05-08-2017, 04:36 PM   #1
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
New build

Going new direction and decided to upgrade the power adder to a 88M turbo combo. This will be a max effort build with a few exceptions...still going to keep "some" creature comforts...ie interior MUST be kept...with NO hackery...lol
I will "occasionally" drive it on the street as I do like to hit a cruise once in a while and make a few weekend rides so that will be a must.

I have since pulled the motor and drivetrain...sold the F1a and will be upgrading my rods as well. Current combo is a stroked 4.6 with Manley 5.85 rods with upgraded ARP bolts. I do plan on making north of 1000 HP so I have decided to upgrade the rods while I have the motor out.

Few pics of progress...
Attached Thumbnails
IMG_2364.JPG   IMG_2367.JPG  
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 05-08-2017, 07:05 PM   #2
slomach03
Registered User
 
slomach03's Avatar
 
Join Date: Nov 2016
Location: Central California
Posts: 219
Re: New build

Wow that's a ton of power! Good luck on the build
__________________
2003 TORCH RED Mach 1 Auto
SLP Loudmouth 1
Mac O/R ProChamber
ICT Billet 1/2in Spacer
JLT Ram Air Intake
FRPP 4.10 Gears
FRPP Aluminum DriveShaft
SCT REV X Tuner
Black 17X9 1995 Cobra Rs
slomach03 is offline   Reply With Quote
Old 05-09-2017, 10:51 AM   #3
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: New build

Gonna be sick! Looking forward to watching the progress
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 05-09-2017, 11:43 AM   #4
sutyak
it's soo-tack
 
sutyak's Avatar
 
Join Date: Nov 2002
Location: Fairmont, WV
Posts: 2,082
Re: New build

Also looking forward to the build! Which turbo will you be using? Lots of choices for 1000whp.
__________________
mark
2004 DSG Mach 1. Built motor. Turbo. 667whp
2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold)
2003 DSG Mach 1. 12.65 @ 106 (sold)
sutyak is offline   Reply With Quote
Old 05-09-2017, 11:49 AM   #5
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: New build

Signing in on your build, this will be fun to watch.... we want pictures!
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 05-09-2017, 12:28 PM   #6
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
Re: New build

Awesome! <subscribed>
__________________
  • Instagram: @azurblumach1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 05-09-2017, 04:17 PM   #7
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Quote:
Originally Posted by sutyak View Post
Also looking forward to the build! Which turbo will you be using? Lots of choices for 1000whp.
forced inductions...488sx (t6 1.15 A/R) with a 96mm wheel....Borg Warner with FI's race housing....should make a TON..
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 05-09-2017, 04:21 PM   #8
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

gotta say one thing though...having a BOLT in lower radiator support made pulling entire drivetrain SUPER SUPER easy....once I disconnected the main harness, exh and few wiring grounds..it was out in less than an hour. I dropped everything onto a dolly and wammo...out...easy!
FOR guys willing to go that route I HIGHLY recommend it....
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 05-09-2017, 05:17 PM   #9
sutyak
it's soo-tack
 
sutyak's Avatar
 
Join Date: Nov 2002
Location: Fairmont, WV
Posts: 2,082
Re: New build

Quote:
Originally Posted by littlemags View Post
forced inductions...488sx (t6 1.15 A/R) with a 96mm wheel....Borg Warner with FI's race housing....should make a TON..
Wow, that's a monster. Have you plotted a compressor map?
__________________
mark
2004 DSG Mach 1. Built motor. Turbo. 667whp
2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold)
2003 DSG Mach 1. 12.65 @ 106 (sold)
sutyak is offline   Reply With Quote
Old 05-09-2017, 06:08 PM   #10
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: New build

Quote:
Originally Posted by littlemags View Post
gotta say one thing though...having a BOLT in lower radiator support made pulling entire drivetrain SUPER SUPER easy....once I disconnected the main harness, exh and few wiring grounds..it was out in less than an hour. I dropped everything onto a dolly and wammo...out...easy!
FOR guys willing to go that route I HIGHLY recommend it....
That's a good idea, after pulling mine a few times I which I had done that. Wait, I still have A/C and would have to deal with the condenser and freon... doh.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 05-10-2017, 07:23 PM   #11
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Quote:
Originally Posted by sutyak View Post
Wow, that's a monster. Have you plotted a compressor map?
I have not...but have seen it in a similar combo to what mine will be and with a conservative tune he made over 1200...
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 05-10-2017, 07:42 PM   #12
sutyak
it's soo-tack
 
sutyak's Avatar
 
Join Date: Nov 2002
Location: Fairmont, WV
Posts: 2,082
Re: New build

Just making sure you know that'll make more like 1300whp. :-)
Twice I've had too big of a turbo and ended up going a step down. Trying to save you from buying two turbos.
__________________
mark
2004 DSG Mach 1. Built motor. Turbo. 667whp
2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold)
2003 DSG Mach 1. 12.65 @ 106 (sold)
sutyak is offline   Reply With Quote
Old 05-12-2017, 04:56 PM   #13
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Quote:
Originally Posted by sutyak View Post
Just making sure you know that'll make more like 1300whp. :-)
Twice I've had too big of a turbo and ended up going a step down. Trying to save you from buying two turbos.
To be honest...I was told it could make OVER 1500 but we were going to keep boost and tune around the 1100-1200 range.
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 07-21-2017, 10:11 AM   #14
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

something showed up finally. been a two month wait on billet compressor wheels....
Attached Thumbnails
IMG_2805.JPG   IMG_2809.JPG  
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 07-21-2017, 11:27 AM   #15
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: New build

**** that's awesome
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 07-21-2017, 05:10 PM   #16
TRbetngu
Registered User
 
TRbetngu's Avatar
 
Join Date: Aug 2011
Location: Rogers, AR
Posts: 1,070
Re: New build

this is incredible.
__________________
2003 AB Mach 1
Build date: June 19, 2003

-P1-SC kit
-Magnaflow Catted X w/ Borla Stingers
-MGW Shifter
-H&R SS springs
-18" AFS reps
-Treated better than my wife
TRbetngu is offline   Reply With Quote
Old 07-21-2017, 05:12 PM   #17
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: New build

Gotta do it big!
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 07-21-2017, 09:21 PM   #18
03Shadow Grey
Registered User
 
03Shadow Grey's Avatar
 
Join Date: Feb 2016
Location: Theodore Alabama
Posts: 282
Re: New build

Good lord that is HUGE !!
Should be easy to afford being sponsored by Pepsi
03Shadow Grey is offline   Reply With Quote
Old 07-21-2017, 10:07 PM   #19
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: New build

Wow... thats a beast.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 07-22-2017, 12:25 AM   #20
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
Re: New build

AWESOME!!! I'm in .
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 07-26-2017, 05:17 PM   #21
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Starting the welding up engine bay process.....welding support hole smooth and will tack the scott rod panels this week...more pics to follow
Attached Thumbnails
IMG_2823.JPG  
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 07-26-2017, 06:20 PM   #22
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: New build

It's going to be sick that's for sure. What made you get rid of the F1?
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 07-26-2017, 09:12 PM   #23
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Quote:
Originally Posted by SuperMach1 View Post
It's going to be sick that's for sure. What made you get rid of the F1?
well....to be honest...running a COG driven f1 was hard to control cooling temps. even with a full radiator i ran into IAT temps on rise. I added nitrous to cool temps and took advantage of extra torque BUT that caused a sleeve to drop in my teksid. ONCE that happened I actually had planned on a quick rebuild BUT got a great offer on selling my F1 setup to switch to turbo....so here we go
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 07-31-2017, 12:06 PM   #24
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

a little more work this weekend. spot welded right side panels in. I will seam seal every edge and then fill and block to baby boat smooth....
Attached Thumbnails
IMG_2837.JPG   IMG_2838.JPG  
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 07-31-2017, 12:18 PM   #25
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: New build

That's gonna look great
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:46 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<