|
08-22-2017, 07:05 PM | #1 |
Registered User
Join Date: Jul 2016
Location: Nampa,idaho
Posts: 45
|
Sub boxes
OK fellas,lets see those sub enclosures...im having a hell of a time getting my sundown 12in this trunk...lets see those boxes....
|
08-23-2017, 11:27 PM | #2 |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: Sub boxes
Its not in my Mach but in my daughters ecoboost; I did it with fiberglass and it was the first time I ever worked with fiberglass, if I can do it, anyone can.
http://www.mach1registry.org/forums/...d.php?t=136094 The exact same principle applies to the mach, give it a try.
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
08-26-2017, 02:50 PM | #3 |
Registered User
Join Date: Jul 2016
Location: Nampa,idaho
Posts: 45
|
Re: Sub boxes
Nice box...i bet your little girl loves it..i have to have way more air space and ported to reach the lows my sundown will hit...and I'm looking for ideas of places to put the fosgate prime amps...right now they are on the back of the rear seats.i just bought a cross over/ line driver so I need to move the amps and put things so it's a little nicer looking.any ideas are welcome guys
|
09-03-2017, 05:52 PM | #4 |
Registered User
Join Date: Jul 2016
Location: Nampa,idaho
Posts: 45
|
Re: Sub boxes
Gentelman,i have 2 prime amps and a audiopipe xover/line driver.....i need help finding spots to mount these and a way to...im out of ideas...
|
09-30-2017, 03:22 PM | #5 | |
Registered User
Join Date: Jul 2016
Location: Nampa,idaho
Posts: 45
|
Re: Sub boxes
Quote:
|
|
10-02-2017, 01:37 PM | #6 | |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: Sub boxes
Quote:
1. razor blades, brushes, cups, all are throw away. 2. Drill and something to cut the speaker mounting ring, but you can buy those pre-cut on amazon. 3. something to cut the speaker terminal block, but you could do that with a drill bit. You need a better excuse... lol
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
|
10-02-2017, 02:01 PM | #7 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Sub boxes
the only reason I was able to get 12s in was because I deleted the amp rack when I replaced the whole stereo
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
10-03-2017, 10:19 PM | #8 | |
Registered User
Join Date: Feb 2016
Location: Theodore Alabama
Posts: 282
|
Re: Sub boxes
Quote:
|
|
10-04-2017, 06:59 PM | #9 |
Registered User
Join Date: Oct 2004
Location: Baltimore, Maryland
Posts: 390
|
Re: Sub boxes
I got one a long time ago that curves to fit under the Mach 460 speaker rack. Ive since removed the 460 system but kept the sub box in there. This was on like a 45 degree angle. I got it from Ebay.
To get a full size box in there, the only way is to take out the rear seats, and or build the box inside. I couldnt really tell a difference with my setup vs a bigger box so i took out the big box and kept the slanted box.
__________________
2004 Black Mach1 Auto--- Born 4/5/04 ~3520 Pounds Without driver, and 1/4 tank of gas -Mac Offroad H Pipe -Flowmaster American Thunder 2.5 Inch Catback -Diablo Handheld Tuner -K&N drop in filter -Kenwood H/U, Infinity Kappa 6x8", Kenwood 4chnl amp -2 Atlas 12"Subwoofers & MTX 800W RMS Amp -36 Sq. ft of Dynamat xtreme -Smoked tail light covers |
10-11-2017, 07:07 PM | #10 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: Sub boxes
If interested, I have a Mach 1000 audio amps w/ rack along with the 2 10" subs. I pulled this out of my Mach before I sold the Mach.
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|