A short story about 4vlover and this site... - 2003-04 Mach 1 Registry Owners Club

senator · 04-30-2013, 03:08 PM

I'll keep it simple. I posted a question about finding the size of a vortech coupler that connects to the throttle body so I could order the right one after already ordering the wrong one.

4vlover posted telling me the correct size and even sent me one he had laying around!!!!

Little things like this are almost unheard of nowadays, especially on national forums, and it's a testament of the people of this site. Might not seem like much to most, but the shear generosity was enough to warrant this thread IMO. Some of you guys have really helped me in the process of my build, and I'm glad I swapped to a Mach WAP block or I would have never gotten on this site. Thank you.

Now if 4vlover would send me his PP address, so I can gift him a 12pk, all would be right in the world...

-Bill

DSG2003Mach1 · 04-30-2013, 03:32 PM

good to hear!

definitely some good people here that put a lot of time/effort into making sure members get good technical information out of things they spent a lot of time/effort to figure out and helping other members with parts. Nekasrof sent me fuel line o-rings that I couldnt find to save my life (without buying a very expensive fuel line assembly).

C Vo · 04-30-2013, 04:26 PM

Good thread for sure. M1R FTW

grimyth · 04-30-2013, 06:09 PM

Yea, I had a run in with the guy. It was a little confusion and I prematurely questioned the deal. He was always respectful and seems like a stand up guy. On a side note he uses his dad's pay pal so you would have to make sure pappy dont drink all the beer himself. :P

mach18604 · 04-30-2013, 10:28 PM

This is why I like this form... And don't even use the other ones anymore.

donjuaniii · 04-30-2013, 11:38 PM

Quote:

Originally Posted by mach18604

This is why I like this form... And don't even use the other ones anymore.

I agree...this is one of the most civil and mature forums I've encountered - very refreshing

NTMAREMACH · 05-01-2013, 06:03 AM

This site has a lot of good Karma in it.

mach18604 · 05-01-2013, 09:49 PM

Ok.... Group hug, haha

3150Mach1 · 05-03-2013, 10:05 PM

Yup. Best site for sure.!!!!

ASH302 · 05-05-2013, 05:52 PM

glad everything went great and yes there are people on here, I've had amazing luck on here and for sure after I got blown up on my deployment had a care package sent to me from M1R and meant the world to me

ASh

ricky bobby · 05-27-2013, 11:25 PM

i will always come on the reg it has been good to me as well.

04-30-2013, 03:08 PM	#1
senator Registered User Join Date: Dec 2012 Location: Houston, Texas Posts: 51	A short story about 4vlover and this site... I'll keep it simple. I posted a question about finding the size of a vortech coupler that connects to the throttle body so I could order the right one after already ordering the wrong one. 4vlover posted telling me the correct size and even sent me one he had laying around!!!! Little things like this are almost unheard of nowadays, especially on national forums, and it's a testament of the people of this site. Might not seem like much to most, but the shear generosity was enough to warrant this thread IMO. Some of you guys have really helped me in the process of my build, and I'm glad I swapped to a Mach WAP block or I would have never gotten on this site. Thank you. Now if 4vlover would send me his PP address, so I can gift him a 12pk, all would be right in the world... -Bill

04-30-2013, 03:32 PM	#2
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: A short story about 4vlover and this site... good to hear! definitely some good people here that put a lot of time/effort into making sure members get good technical information out of things they spent a lot of time/effort to figure out and helping other members with parts. Nekasrof sent me fuel line o-rings that I couldnt find to save my life (without buying a very expensive fuel line assembly). __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

04-30-2013, 04:26 PM	#3
C Vo Registered User Join Date: Feb 2012 Location: Houston Posts: 501	Re: A short story about 4vlover and this site... Good thread for sure. M1R FTW

04-30-2013, 06:09 PM	#4
grimyth Registered User Join Date: Oct 2009 Location: Georgia Posts: 76	Re: A short story about 4vlover and this site... Yea, I had a run in with the guy. It was a little confusion and I prematurely questioned the deal. He was always respectful and seems like a stand up guy. On a side note he uses his dad's pay pal so you would have to make sure pappy dont drink all the beer himself. :P

04-30-2013, 10:28 PM	#5
mach18604 Registered User Join Date: Nov 2005 Location: Lyndhurst, Ohio Posts: 2,287	Re: A short story about 4vlover and this site... This is why I like this form... And don't even use the other ones anymore. __________________ Collecting for an Eaton Swap down the road..

05-01-2013, 06:03 AM	#7
NTMAREMACH A NITEMARE IN MASS Join Date: May 2009 Location: Ashburnham, Ma Posts: 3,160	Re: A short story about 4vlover and this site... This site has a lot of good Karma in it.

05-01-2013, 09:49 PM	#8
mach18604 Registered User Join Date: Nov 2005 Location: Lyndhurst, Ohio Posts: 2,287	Re: A short story about 4vlover and this site... Ok.... Group hug, haha __________________ Collecting for an Eaton Swap down the road..

05-03-2013, 10:05 PM	#9
3150Mach1 Love my Mach Join Date: Apr 2005 Location: Charlottesville, VA Posts: 13,678	Re: A short story about 4vlover and this site... Yup. Best site for sure.!!!! __________________ 2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt

05-05-2013, 05:52 PM	#10
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: A short story about 4vlover and this site... glad everything went great and yes there are people on here, I've had amazing luck on here and for sure after I got blown up on my deployment had a care package sent to me from M1R and meant the world to me ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

05-27-2013, 11:25 PM	#11
ricky bobby mach everthing Join Date: Aug 2006 Location: vancover british columbia Posts: 715	Re: A short story about 4vlover and this site... i will always come on the reg it has been good to me as well. __________________ If yur not first yur last! Was 03 mach 1 white automatic 295.1 rwhp 321 ft rwtq accufab throttle body c and L true flow intake tube bassani catted x pipe slp lm1 (after dyno) steeda full lenth sfc kb jacking rails matrix brace steeda front back strut braces Update coming soon

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)