WTB: Bracket setup to mount shaker to Eaton - 2003-04 Mach 1 Registry Owners Club

not a gt · 01-02-2016, 10:21 PM

Hey guys, my fab skills SUCK

I see where some have fabbed up brackets that shaker is mounted to Eaton. I don't want the setup where shaker stays with the hood. I would be willing to send my shaker wherever for the modification, pay shipping there and back plus whatever to actually do it. I also like the idea of having it where the bottom is modified so air going into shaker blows on the Eaton for some possible cooling,(bottom part missing??) like this (can't remember who had this setup, I sent a PM) Thanks guys

http://imgur.com/a/YHSIV

01-02-2016, 10:21 PM	#1
not a gt Registered User Join Date: Mar 2007 Location: Waaayy out in the country,leave your GPS at home! Posts: 4,825	WTB: Bracket setup to mount shaker to Eaton Hey guys, my fab skills SUCK I see where some have fabbed up brackets that shaker is mounted to Eaton. I don't want the setup where shaker stays with the hood. I would be willing to send my shaker wherever for the modification, pay shipping there and back plus whatever to actually do it. I also like the idea of having it where the bottom is modified so air going into shaker blows on the Eaton for some possible cooling,(bottom part missing??) like this (can't remember who had this setup, I sent a PM) Thanks guys http://imgur.com/a/YHSIV __________________ 2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)