|
|
2003-04 Mach 1 - For Sale/Wanted Post ONLY 03-04 Mach 1s For sale or wanted. Please Put Year, Color & Location in title! |
|
Thread Tools | Display Modes |
11-14-2011, 12:49 PM | #1 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
03 AB, 57k, eaton swap, lots of mods
Ok have finally decided to sell the car. Has been a great car and alot of fun, just ready to move onto something else.
Car has just shy of 57,000 miles. Here is my mod list on the car, I have alot of money in the car and the car has been built with the high quality parts, no cheap stuff. Engine : Stock motor, eaton swap at around 35k. 98 cobra intake cams Running a 3.4 pulley, accufab TB, jlt c/f intake, 39lb injectors, dual focus pumps, cobra tank, PPRV delete. Car put down 465 rwhp and 420 ftlb at 15* of timing on a hot humid day. Car was tuned by Eric Brooks of Brooks Speed. Car runs great, drives great, no hiccups no nothing. Car is lots of fun and quick. Trans: T56 Magnum with around 7k. Centerforce DFX clutch, FRPP TOB, I went with the 2.97 1st gear and .50 6th gear. The car has 373s and at 95mph I'm at 2500rpm. Rear : 31 spline moser axles 31 spline NEW 03/04 cobra posi FRPP 3:73 gears Complete timkin bearing set moser 3" studs welded axle tubes Has about 20k on rear at this point. Wheels / Tires True Forged Mach 5 wheels -- 17x11 and 17x8 Matte black center, polish stepped lips, big brake cut 315/35/17 Nitto NT555R drag radials ( just about new, 4k) 245/40/17 Kuhmo ecsta asx (about 10k still like new) Other things that are done to the car: 4500k HIDs Heads and fogs Smoked headlights 20% tint tinted tails LED interior lights Mach 1 headrests and floormats EBC red stuff brake pads and rotorpros slotted/drilled rotors MM full length powercoated sub frame connectors welded torque boxes bbk longtubes, bbk orh, slp lm2 catback I know im missing more but I just cant remember everything. Ive done ALOT of work to the car, all it really needs at this point is some suspension work its still stock. The car has some rock chips on the front hood because I used to drive the car back and fourth to Miami every few weeks ( was getting 25mpg at 85/90) and the only other cosmetic thing I can think of is on the trunk when I took the spoiler off it peeled up some small pieces of the paint, I put touch up paint on it but its going to need repainted to look perfect. It just hasnt bothered me enough to ever do it. I paid 15,500 for the car in 08. Im trying to get 17,500$ now. That doesnt even pay for the wheels alone. Whoever gets it, is getting one hell of a deal. I would part the car out but I just dont have the time to do it so my loss is your gain. I will post updates pics tonight or tommorow im trying to get them uploaded. Please EMAIL me for info. upperplayground@comcast.net
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey Last edited by Mudd92; 11-15-2011 at 09:09 AM. |
11-15-2011, 07:37 AM | #2 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
More pics
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
11-16-2011, 11:11 AM | #3 |
Registered User
Join Date: Nov 2011
Location: Saint Louis, Missouri
Posts: 3
|
Re: 03 AB, 57k, eaton swap, lots of mods
Wow, if only you were closer to me. This is my ideal car, but only if it were DSG. Willing to travel?
|
11-16-2011, 12:06 PM | #4 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
Not really wanting to drive to far but if you were really interested we could probably work it out. Shoot me an email
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
11-18-2011, 04:06 PM | #5 |
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Re: 03 AB, 57k, eaton swap, lots of mods
Awesome car. That thing has some money into it.
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
11-18-2011, 05:01 PM | #6 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
Thx man, yea lmao Ive deff. put a few dollars in her..
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
11-28-2011, 08:07 AM | #7 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
Bump 16,500$ someone get this deal before I trade it in!
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
11-29-2011, 04:18 PM | #8 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
Make a good offer someone and give her a good home!
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
12-03-2011, 03:48 PM | #9 |
Registered User
Join Date: Jul 2011
Location: Fort Leonard Wood, MO
Posts: 158
|
Re: 03 AB, 57k, eaton swap, lots of mods
I wish to god I would have seen this back in July!!!!!!!! I would have bought your car in a heart beat!!!!!! I paid 14,000 for mine!!!!! of course it is the competition orange!!!!! <<<----MAKES IT WORTH MORE!!!!!
|
12-04-2011, 03:50 PM | #10 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Wanted to update And bump. Drove the car to Miami And back yesterday. didn't have a single problem, no burning oil, no smoking no nothing just a nice relaxing drive. Set the cruise at 84 was running 1900 rpm And got 380 per tank averaged about 26 mpg.
mileage now is about 58k
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
12-04-2011, 05:04 PM | #11 |
finallygottamach1
Join Date: Dec 2008
Location: Martinsville,VA
Posts: 259
|
Re: 03 AB, 57k, eaton swap, lots of mods
Close ups of paint damage on trunk?
__________________
finallygottamach1 |
12-04-2011, 08:01 PM | #12 |
Registered User
Join Date: Aug 2007
Location: Houston, TX
Posts: 746
|
Re: 03 AB, 57k, eaton swap, lots of mods
NOOOOOOO, sad day to see you put it up for sale. I always liked your mach
Edit: If you want to sell that 3.4 pulley, I could give you the stock one plus cash =)
__________________
Eaton Swapped, Pro-Motion built transmission, and 1.55 60' built rear end |
12-04-2011, 09:18 PM | #13 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
I put the spoiler back on it actually And it covered it up except a piece I have painted over with touch up paint but I will grab a pic tomorrow And post it on here for you.
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
12-04-2011, 09:19 PM | #14 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Thanks man, it will be missed just ready for a change. Lol I've got a 2.67 you cab get
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
12-04-2011, 10:12 PM | #15 |
Registered User
Join Date: Aug 2007
Location: Houston, TX
Posts: 746
|
Re: 03 AB, 57k, eaton swap, lots of mods
lol not trying to run that much boost! What are you looking to get into now?
__________________
Eaton Swapped, Pro-Motion built transmission, and 1.55 60' built rear end |
12-05-2011, 07:08 AM | #16 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
Looking for a black 02.03 Z06
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
12-07-2011, 03:34 PM | #17 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
16,000$.....?
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
12-13-2011, 11:32 AM | #18 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
bumpppppppppp
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
12-15-2011, 09:32 PM | #19 |
Registered User
Join Date: Apr 2011
Location: Apopka, Florida
Posts: 18
|
Re: 03 AB, 57k, eaton swap, lots of mods
beautiful looking car man. what kind of software are you using for the car (sct, diablo) depending on what kind of money I have after buying xmas gifts I will be vary interested.
|
12-16-2011, 08:31 AM | #20 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
Thanks man, its SCT. And come on! Take her, 15,500$
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
12-16-2011, 10:31 AM | #21 |
Registered User
Join Date: Dec 2011
Location: Port St. Lucie, FL
Posts: 114
|
Do you still have the original Mach 1 front bumper?
--- I am here: http://maps.google.com/maps?ll=27.253682,-80.409316 |
12-16-2011, 11:18 AM | #22 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: 03 AB, 57k, eaton swap, lots of mods
No i dont. I dont have much of the stock parts at all for it anymore.
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
12-16-2011, 11:25 AM | #23 |
Registered User
Join Date: Dec 2011
Location: Port St. Lucie, FL
Posts: 114
|
Ok. Car is still interesting tho. I'm getting LASIK soon so I won't be able to buy for another month most likely. But if ur car is still FS at the time then we can see. GLWS either way.
--- I am here: http://maps.google.com/maps?ll=27.253676,-80.409265 |
12-17-2011, 01:11 AM | #24 |
Registered User
Join Date: Apr 2011
Location: Apopka, Florida
Posts: 18
|
Re: 03 AB, 57k, eaton swap, lots of mods
if I can get financed for it I would be there tomorrow. lol
Edit: is there any way you can get a side view pic of the car so I can see the wheels, and shot of the front end with the hood closed? sorry to be like a needy *****.lol just want to see what the car looks like. |
12-19-2011, 12:35 PM | #25 |
Sweat saves blood
Join Date: Oct 2011
Location: Hurlburt Field, FL
Posts: 200
|
Re: 03 AB, 57k, eaton swap, lots of mods
awesome wheels man! definitely interested!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|