Does a procharger kit.......

[DA5DEUCE]

Does a procharger kit from a 96-98 cobra fit a MACH 1? I found a great deal on SVTP and was wondering if it would bolt right up to an 03 mach or would I need different brackets? Thanks for any answers. Tried to look it up but didn't know how to word on the search option lol. :beer:

Sent from straight outta Compton a Yung brotha named 5DEUCE writin on Tapatalk sippin lemon juice

[machgsxr]

You would have yo change a few things. Bracket being one. You would need the inlet pipe that feeds the intake and the stuff to bolt the shaker back on. Not much, but pc is expensive if buying direct.

[DA5DEUCE]

Originally Posted by machgsxr

You would have yo change a few things. Bracket being one. You would need the inlet pipe that feeds the intake and the stuff to bolt the shaker back on. Not much, but pc is expensive if buying direct.

Yea that's why I'll settle for a used kit haha. Can I get the brackets and inlet pipe direct from procharger? Who makes the bolts and stuff for putting the shaker back on?

Sent from straight outta Compton a Yung brotha named 5DEUCE writin on Tapatalk sippin lemon juice

[machgsxr]

Procharger

[medrick]

you would need the "shaker bracket package"

as far as the bracket goes, id recommend keeping the bracket it comes with and swapping out to a 96-99 timing cover so you can have the 3 bolt tensioner.

[DA5DEUCE]

Originally Posted by medrick

you would need the "shaker bracket package"

as far as the bracket goes, id recommend keeping the bracket it comes with and swapping out to a 96-99 timing cover so you can have the 3 bolt tensioner.

hold up I thought 96-98 timing cover was different from 99+?

Sent from straight outta Compton a Yung brotha named 5DEUCE writin on Tapatalk sippin lemon juice

[04JUIC]

If you do pull the trigger an pick it up, when you call ProCharger (ATI) ask to talk to Shannon? I believe thats his name?? He was awesome to deal with hooked me up with the "shaker bracket kit" and the plumbing pieces needed to swap a 2V GT kit to work on my Mach.

[lil devil]

Could make your own bracket very easily. I made mine in about 10 minutes and has worked great for me so far. Pieced my kit together and was going to order parts I needed to make work from procharger but they were stupid expensive. So I made my own shaker bracket, coolant pipes, intake pipe. All for less than 100 bucks.

[Zack]

Originally Posted by medrick

you would need the "shaker bracket package"

as far as the bracket goes, id recommend keeping the bracket it comes with and swapping out to a 96-99 timing cover so you can have the 3 bolt tensioner.

Best advice in the entire thread.