|
||
|
|
||
11-28-2014, 09:01 AM
|
#1 |
|
Registered User
 Join Date: Feb 2013
Location: Yonkers, NY
Posts: 14
|
Intake Manifold?
I have a built motor with a D1SC. Currently the car is making 529 rwhp and 450 rwtq. I have the stock intake manifold. I was wondering what everyone else is using and if it is worth it to change it out for something else. I have looked at the intake manifold at Pauls High Performance and the sheet metal manifolds from MMR. I would appreciate all opinions. thanks in advance...
|
|
|
|
11-28-2014, 09:38 AM
|
#2 |
|
Registered User
Join Date: Jul 2014
Location: Tucson AZ
Posts: 28
|
Re: Intake Manifold?
I will have a ported and shortened manifold here for sale shortly. Made great power with it
__________________
03 oxford white aka SLOWHITE Full exhaust, pypes m80's and SSS terminator mufflers Eaton Swap with built 289 stroker Eibach Prokit with J&M caster camber plates T56 with spec clutch and 3.73 rear gears 18" black FR500 with 275 in front and 285 in the rear |
|
|
|
|
11-28-2014, 11:00 AM
|
#3 | |
|
finally paid for
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Intake Manifold?
Quote:
I would really look at a short runner with a spacer. There are a tons floating around....
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... 
|
|
|
|
|
|
11-28-2014, 11:17 AM
|
#4 | |
|
Registered User
Join Date: Feb 2013
Location: Yonkers, NY
Posts: 14
|
Re: Intake Manifold?
Quote:
|
|
|
|
|
|
11-29-2014, 04:37 PM
|
#5 |
|
Registered User
Join Date: Dec 2007
Location: beavercreek, oh
Posts: 4,695
|
Re: Intake Manifold?
do not go with a short runner that is less than 10" in length.
|
|
|
|
|
11-29-2014, 04:51 PM
|
#6 | |
|
Registered User
 
Join Date: Jun 2007
Location: Texas
Posts: 451
|
Re: Intake Manifold?
Quote:
__________________
Charles 2001 DHG Bullitt #0736 2001 TB Bullitt #0810 2001 DHG Bullitt #0256 |
|
|
|
|
|
11-29-2014, 05:53 PM
|
#7 | |
|
Registered User
Join Date: Feb 2013
Location: Yonkers, NY
Posts: 14
|
Re: Intake Manifold?
Quote:
|
|
|
|
|
|
11-29-2014, 07:43 PM
|
#8 | |
|
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Intake Manifold?
Quote:
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress...
|
|
|
|
|
|
11-29-2014, 07:48 PM
|
#9 | |
|
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Quote:
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
|
|
|
|
|
11-29-2014, 07:52 PM
|
#10 | |
|
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Intake Manifold?
Quote:
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress...
|
|
|
|
|
|
11-29-2014, 09:15 PM
|
#11 |
|
Registered User
Join Date: Feb 2013
Location: Yonkers, NY
Posts: 14
|
Re: Intake Manifold?
o.k. thanks guys...
|
|
|
|
|
12-05-2014, 01:58 PM
|
#12 |
|
Registered User
 
Join Date: Feb 2008
Location: Cowtown, Alberta
Posts: 1,261
|
Re: Intake Manifold?
Does anyone have a spare short runner intake kicking around? That's built with quality?
Brendan
__________________
Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works. SAE 378RWHP ,302 ft/lbs 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE |
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
<
Linear Mode
