2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > General Discussions > General Registry Discussion

General Registry Discussion Topics of Interest (Mach 1 Related or otherwise) for discussions that don't fit other forums.

Reply
 
Thread Tools Display Modes
Old 02-17-2018, 10:37 AM   #1
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
2018 Plans for your car.

Just out of curiosity...what is everyone planning for their Mach's this year. I know i go into every year with something of a plan (subject to change as i go of course).

Since I basically rebuilt the suspension last year, did ac lines and dryer, wheels and tire upgrade, and replaced the fuel pump after it took a dump...this year's focus for me is on the cosmetics and trim pieces that have seen better days.

15 year old window tinting finally started having some issues, so getting that re-done today.

Planning on,
new headlights
carpet needs replacement
replace the driver side switch panel insert (cracked)
Seriously looking at the SVE Fr500 steering wheel (would like anyones 2c on that by the way)
replace window switch on the passenger side door.


Wish list...
Front Seat covers
Stereo Upgrade (already have a good head unit in the car)


Anyway, just focusing on trying to get the old girl's cosmetics up to speed this year...

of course...never know what mechanical things may crop up...but...
__________________
JB

03 Torch Red Mach 1
21 FJG Mach 1


Stainless Steel Systems Adrenaline Series
BBK long tube headers catted x pipe
18x9 18x10- Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's 285/35r18
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
Eibach Sway Bars
jbrad88 is offline   Reply With Quote
Old 02-17-2018, 11:35 AM   #2
Thunderbolt
And Leadfoot
 
Thunderbolt's Avatar
 
Join Date: Sep 2004
Location: Easy Street
Posts: 6,463
Re: 2018 Plans for your car.

I only plan on driving mine more. With only 37K on it, nothing needs replaced. I put 6K on last year. Try and put 5K on this year. It's way more enjoyable driving the Mach in Iowa than it was in Seattle. The traffic and amount of idiots is far fewer.
__________________
'23 Fighter Jet Gray Mach 1 (470hp/410tq)
'04 Azure Blue Mach 1 (305hp/320tq)
'17 Blue Streak Dodge Ram 1500 Quad Cab 4X4 (395hp/410tq)

I'm livin' the Office Space dream. I'm retired, and sit on my azz and do nothing.

Every now and then, say What The F***. What The F***, gives you freedom. With freedom comes opportunity. Opportunity, makes your future. If you can't say it.......you can't do it.----Miles
Thunderbolt is offline   Reply With Quote
Old 02-17-2018, 11:45 AM   #3
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
Re: 2018 Plans for your car.

wish mine was still that low mileage. but...unfortunately I had to use her as a daily for about 6 years...
__________________
JB

03 Torch Red Mach 1
21 FJG Mach 1


Stainless Steel Systems Adrenaline Series
BBK long tube headers catted x pipe
18x9 18x10- Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's 285/35r18
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
Eibach Sway Bars
jbrad88 is offline   Reply With Quote
Old 02-17-2018, 01:32 PM   #4
Turbo900rr
Registered User
 
Join Date: Feb 2017
Location: Springfield
Posts: 24
Re: 2018 Plans for your car.

Swap the 4r70 for a 6r80. New suspension, k member and coil overs. That’s it for this year.
Turbo900rr is offline   Reply With Quote
Old 02-17-2018, 01:56 PM   #5
Mach351
Psycho Dog is Psycho
 
Mach351's Avatar
 
Join Date: Sep 2008
Location: Lewisville, TX
Posts: 1,989
Re: 2018 Plans for your car.

going to need a new set of tires when mine comes out of storage this spring/summer.
Mach351 is offline   Reply With Quote
Old 02-17-2018, 08:30 PM   #6
gfong
Greg Fonger
 
gfong's Avatar
 
Join Date: May 2004
Location: Ontario, Canada
Posts: 3,416
Re: 2018 Plans for your car.

Have to decide to drive it more or sell it!

Last year I did not even put it on the road and the year before I drove it maybe 50 to 100 miles.. bought it brand new #feelsbadman..
gfong is offline   Reply With Quote
Old 02-17-2018, 11:09 PM   #7
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: 2018 Plans for your car.

New shocks/struts
Set of 15” rear wheels with some sticky *** tires
Get the tune finalized and some dyno numbers
Make a few passes (haven’t run it in like 9 years and 400hp less)
Put the 99/01 cobra front bumper on and have the front 1/3 of the car sprayed
HID retrofits

I might also take out this lethal fuel system and go with a Fore setup
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 02-18-2018, 01:09 AM   #8
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Re: 2018 Plans for your car.

Plan on going the forced induction route this year.

- P-1X Procharger Kit & Dyno Tune
- Kooks Long Tube Headers & Catted X-Pipe
- Replace Rear Tires with Nitto NT555 G2s

Next year, I'll focus on aesthetics (fresh paint job, replace worn out plastic parts, and Mach 1 vinyl decals). Bigger brakes to help slow down the Mach.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 02-18-2018, 07:30 AM   #9
USMCWeatherMan
Registered User
 
USMCWeatherMan's Avatar
 
Join Date: Nov 2008
Location: Haymarket, VA
Posts: 532
Re: 2018 Plans for your car.

First things first....got a spot in the garage cleared out to park it. I have a few maintenance items on the list....new rotors and pads; and my battery cable posts have finally bit the dust....need to replace those.

Would love to get my hands on some AFS deep dish 17's....and it needs a paint job bad. Been putting it off for a while, but now that I've got dedicated garage space, I need to stop putting it off.
USMCWeatherMan is offline   Reply With Quote
Old 02-18-2018, 08:32 AM   #10
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
Re: 2018 Plans for your car.

Quote:
Originally Posted by SouthKak_Mach1 View Post
Plan on going the forced induction route this year.

- P-1X Procharger Kit & Dyno Tune
- Kooks Long Tube Headers & Catted X-Pipe
- Replace Rear Tires with Nitto NT555 G2s

Next year, I'll focus on aesthetics (fresh paint job, replace worn out plastic parts, and Mach 1 vinyl decals). Bigger brakes to help slow down the Mach.
I am very happy with the Nitto G2’s. Like the tire a lot
__________________
JB

03 Torch Red Mach 1
21 FJG Mach 1


Stainless Steel Systems Adrenaline Series
BBK long tube headers catted x pipe
18x9 18x10- Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's 285/35r18
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
Eibach Sway Bars
jbrad88 is offline   Reply With Quote
Old 02-18-2018, 09:31 AM   #11
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: 2018 Plans for your car.

Quote:
Originally Posted by SouthKak_Mach1 View Post
Plan on going the forced induction route this year.

- P-1X Procharger Kit & Dyno Tune
- Kooks Long Tube Headers & Catted X-Pipe
- Replace Rear Tires with Nitto NT555 G2s

Next year, I'll focus on aesthetics (fresh paint job, replace worn out plastic parts, and Mach 1 vinyl decals). Bigger brakes to help slow down the Mach.
Im not happy at all the starter access and ground clearance with my kooks for whatever thats worth. Ive got a tubular K member and changing a starter would still be a real tough chore with these things
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 02-18-2018, 10:00 AM   #12
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: 2018 Plans for your car.

Get this 2001 Bullitt fuel door paint matched, the fasteners that go around it polished, and get it installed. Had it in a box for over a year. Time to get it done.

Once temps get above 70°, install this amber fog light tint

Paint and install the steeda wiper delete caps

Repair passenger side skirt. Hit a rock and it broke that plastic tab underneath that attaches it to the pinch weld. Guess im just going to run a self-tapping sheet metal screw through it...dont know any other way to do it

Install this H3R performance Halon fire extinguisher

Probably have to replace front drive snout bearings on the blower. I think one is going bad.
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 02-18-2018, 02:36 PM   #13
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Re: 2018 Plans for your car.

Quote:
Originally Posted by jbrad88 View Post
I am very happy with the Nitto G2’s. Like the tire a lot
Yeah, the G2's are a pretty good tire as far as the balance between performance, durability, and affordability. I have them on the front wheel, but ended up going with the 1st Gen NT555s in the rear due to a great deal on price. I have to replace the rear tires now, because of the damage from the fenders rubbing the tires when I lowered the car with Eibach Sportlines. I just recently done the rear fenders rolled, so that shouldn't be an issue anymore.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 02-18-2018, 02:38 PM   #14
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Re: 2018 Plans for your car.

Quote:
Originally Posted by DSG2003Mach1 View Post
Im not happy at all the starter access and ground clearance with my kooks for whatever thats worth. Ive got a tubular K member and changing a starter would still be a real tough chore with these things
Is there another brand of headers/X-pipe combo that you would recommend with better clearance? I already have a feeling that I'm going to have clearance issue since my car has Eibach Sportlines.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 02-18-2018, 03:24 PM   #15
Recon
Registered User
 
Recon's Avatar
 
Join Date: Nov 2017
Location: Hopinsville
Posts: 163
2018 Plans for your car.

Complete the rebuilt engine, and install.
Dial in tune.
Get the Terminator IRS and install it.
New catback.
Paint work done.
All the incredibly tacky “mods” taken off.
All painted interior parts paint back stock.
Get Cobra ambers.
Really idiotic that a 33k mile car can be in the shape it’s in. But I’ll get her running good and looking pretty again. Many more things planned but I can only do so much this year. Very eager to get her on the road, never driven a Mach 1 before. And I’m really looking forward to popping that cherry with my own Mach 1. 😊


Pick your poison.
Recon is offline   Reply With Quote
Old 02-18-2018, 05:20 PM   #16
falcongtho3
Moderating at Mach 1
 
falcongtho3's Avatar
 
Join Date: Aug 2002
Location: Baton Rouge, La.
Posts: 16,267
Re: 2018 Plans for your car.

Resolve some paint issues, Replace the wiper cowl.Deal with whatever Gremlins rear their ugly head.

__________________
Krewe de la Mach Rouge

#340804 13th Mach 1 built
11/07/02 Build Date
12/13/02 Delivery
falcongtho3 is offline   Reply With Quote
Old 02-18-2018, 08:51 PM   #17
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
Re: 2018 Plans for your car.

Quote:
Originally Posted by SouthKak_Mach1 View Post
Yeah, the G2's are a pretty good tire as far as the balance between performance, durability, and affordability. I have them on the front wheel, but ended up going with the 1st Gen NT555s in the rear due to a great deal on price. I have to replace the rear tires now, because of the damage from the fenders rubbing the tires when I lowered the car with Eibach Sportlines. I just recently done the rear fenders rolled, so that shouldn't be an issue anymore.
I opted to go back to a 9” wheel in the rear and am running 275/35r18’s because I don’t want to roll the quarter wheelhouse lip. Fought the tire cut down issue on a couple tires...decided to take the easy way out. Plus I drive mine on the street mostly so I can rotate...
__________________
JB

03 Torch Red Mach 1
21 FJG Mach 1


Stainless Steel Systems Adrenaline Series
BBK long tube headers catted x pipe
18x9 18x10- Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's 285/35r18
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
Eibach Sway Bars
jbrad88 is offline   Reply With Quote
Old 02-18-2018, 08:53 PM   #18
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
Re: 2018 Plans for your car.

[QUOTE=falcongtho3;1629987]Resolve some paint issues, Replace the wiper cowl.Deal with whatever Gremlins rear their ugly head.

[/QUOTE

I understand gremlins....
__________________
JB

03 Torch Red Mach 1
21 FJG Mach 1


Stainless Steel Systems Adrenaline Series
BBK long tube headers catted x pipe
18x9 18x10- Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's 285/35r18
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
Eibach Sway Bars
jbrad88 is offline   Reply With Quote
Old 02-19-2018, 08:30 AM   #19
serviceman1
Registered User
 
serviceman1's Avatar
 
Join Date: Mar 2008
Location: derry nh
Posts: 302
Re: 2018 Plans for your car.

Going to finally add some HP Had the motor built 2 years ago, and now feel it is ready for some spray. Would like to go pro charger but way to expensive. Someday that will happen
__________________
lifes to short to race anything else
serviceman1 is offline   Reply With Quote
Old 02-19-2018, 10:38 AM   #20
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: 2018 Plans for your car.

Quote:
Originally Posted by SouthKak_Mach1 View Post
Is there another brand of headers/X-pipe combo that you would recommend with better clearance? I already have a feeling that I'm going to have clearance issue since my car has Eibach Sportlines.
If I was gonna do it again I’d look into ARH. I’ve also heard great things about figment and ground clearance from Mack headers, idnjust get them coated first. Also I have a t56 so the bellhousing is removable and I don’t have to worry about pass side clearance when pulling the trans compared to a 3650
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 02-19-2018, 11:45 AM   #21
Idaho_mach
Registered User
 
Join Date: May 2013
Location: Nampa
Posts: 62
Re: 2018 Plans for your car.

Twin disc
Re-paint
Built short block
New Blower

I'll probably only get the clutch. I have a teksid block that's been sitting under my bech for a couple of years now. That needs to get done
Idaho_mach is offline   Reply With Quote
Old 02-19-2018, 04:19 PM   #22
SchwermoRacing
Registered User
 
SchwermoRacing's Avatar
 
Join Date: Mar 2007
Location: Brookhaven, PA
Posts: 591
Re: 2018 Plans for your car.

Quote:
Originally Posted by jbrad88 View Post
Just out of curiosity...what is everyone planning for their Mach's this year. I know i go into every year with something of a plan (subject to change as i go of course).

Since I basically rebuilt the suspension last year, did ac lines and dryer, wheels and tire upgrade, and replaced the fuel pump after it took a dump...this year's focus for me is on the cosmetics and trim pieces that have seen better days.

15 year old window tinting finally started having some issues, so getting that re-done today.

Planning on,
new headlights
carpet needs replacement
replace the driver side switch panel insert (cracked)
Seriously looking at the SVE Fr500 steering wheel (would like anyones 2c on that by the way)
replace window switch on the passenger side door.


Wish list...
Front Seat covers
Stereo Upgrade (already have a good head unit in the car)


Anyway, just focusing on trying to get the old girl's cosmetics up to speed this year...

of course...never know what mechanical things may crop up...but...
I had the original FRPP FR500 wheel and I LOVED it. It was the perfect upgrade to me for the car.
__________________
Mach1 items for sale. PM for photos/info. Pickup/meet only - I'll be at Carlisle!
Hawks HPS pads, front/rear
G-Stop front SS brakelines
SchwermoRacing is offline   Reply With Quote
Old 02-19-2018, 08:16 PM   #23
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: 2018 Plans for your car.

Quote:
Originally Posted by SchwermoRacing View Post
I had the original FRPP FR500 wheel and I LOVED it. It was the perfect upgrade to me for the car.
I had one, as well, in my hci 94 GTS. It was awesome. I've got an 03 cobra wheel in the Mach. It's a nice upgrade too.
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 02-20-2018, 08:44 AM   #24
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
Re: 2018 Plans for your car.

Quote:
Originally Posted by DSG2003Mach1 View Post
If I was gonna do it again I’d look into ARH. I’ve also heard great things about figment and ground clearance from Mack headers, idnjust get them coated first. Also I have a t56 so the bellhousing is removable and I don’t have to worry about pass side clearance when pulling the trans compared to a 3650
That t-56 is one of those pipe dreams as well...
__________________
JB

03 Torch Red Mach 1
21 FJG Mach 1


Stainless Steel Systems Adrenaline Series
BBK long tube headers catted x pipe
18x9 18x10- Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's 285/35r18
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
Eibach Sway Bars
jbrad88 is offline   Reply With Quote
Old 02-20-2018, 11:04 AM   #25
AlloyPony
Registered User
 
AlloyPony's Avatar
 
Join Date: Jan 2018
Location: Central Kentucky
Posts: 161
Re: 2018 Plans for your car.

Just bought mine over New Year's weekend, after drooling over the Machs for years. It was a one-owner car, ordered new in the summer of '02, and it was well cared for. Having said that, it did have some issues that are common with a 15 year old car. So, 2018 will be spent getting mine back to original condition again.

- I just got it home from the body shop. They repainted the hood, front bumper cover, and blended the two front fenders. This was needed because rock chips had obliterated the front of the car.

- Passenger headlight is full of water so that'll get replaced soon.

- Driver side fog light needs to be cleaned or replaced...it's much dimmer than the passenger side, even with two new matching bulbs in them.

- I changed the plugs and checked that all service was up to date.

- I did go ahead and add an O/R H-pipe because I figured the cats were likely pretty dirty inside and I wanted to make the car breathe better again. While I was under there, I installed a Ford Racing aluminum driveshaft which killed two birds with one stone by replacing the stock U-joints which had 129,000 on them.

- My focus now is turning to the interior. The driver seat bolster is torn from years of abrasion getting in and out of this low-sitting car. The headliner is starting to slightly peel at the windshield. I'll be working on these things next, plus the car needs a thorough vaccum/cleaning.

- The windows are still factory but I'll likely tint them soon to help protect the interior in the hot summer sun this year. I'm hoping that this is the last year the car will spend outdoors. I'll have it in the garage beginning this coming fall.

After that, I'll just keep it serviced religiously, drive it to shows all over Kentucky, and pray that I never see that 4V knock that signals death for these engines around this mileage I'm at.
__________________
2003 Mach 1 - TR3650 - Mac O/R H-pipe - Ford Racing driveshaft - Modified air intake - Nitto Motivo 315/35s on 10.5" FR500 wheels - Steeda clutch adjuster
AlloyPony is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:50 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<