|
04-19-2007, 06:02 PM | #1 |
Registered User
Join Date: Oct 2006
Location: Owasso, OK
Posts: 297
|
CD 6 Player Problems - $90.00 Solution
After the third f*cking radio I bought on eBay - One the wrong spec., another the wrong radio entirely (used a Mach 1 interior shot for his listing) and the third with a D.O.A. CD player, I finally gave up and went searching for an OEM car audio repair shop. These guys know exactly what's need to fix your CD player.
They quoted me around $90 if I sent in my CD player only, so here's some tips on seperating the faceplate and radio/ CD player. -Obtain a T08 and a T10 Torx bits (these are small! Radio Shack carries them in a kit) -Pull on the volume knob, it pops right off -Remove the faceplate (4 countersunk screws, carefully pop it over the 4 tabs), disconnect the small 2 pin plug -If you want, this is a good time to clean your faceplate. Remove the circuit board by removing the gold screws and lift it out. I washed mine with mild detergent and a paint brush, rinse and blow dry with compressed air. It's just plastic at this point, allow to air dry completely. -The CD player is held on with side screws, pretty self-explanatory. This is what you need to send off...http://www.rivetech.com/Fordmech.html Home page...http://www.rivetech.com/
__________________
`03 Torch Red Mach |
04-19-2007, 06:40 PM | #2 | |
Back in Black
Join Date: Feb 2006
Location: Lakeland, FL
Posts: 1,070
|
Re: CD 6 Player Problems - $90.00 Solution
Quote:
Great post, my CD payer cycles on it own with the key off. I am afraid it could catch fire. Not trying to highjack but you mentioned the specialty bits and I just bought this set from harbor freight and I thought this would be a good thread to post in. Very cheap price for all these bits. http://www.harborfreight.com/cpi/cta...emnumber=91310
__________________
Banditman 03 Black Mach 1 5 spd, K&N FIPK2, PHP spacer, MRT Catted h pipe, Magnaflow catback. |
|
04-19-2007, 06:42 PM | #3 |
Braderunna
Join Date: May 2004
Location: hampton, va
Posts: 4,949
|
Re: CD 6 Player Problems - $90.00 Solution
Excellent info!
__________________
"Sparky"- 2003 Azure Blue w/MT and IUP Visit my garage on mach1mustang.org for details. |
04-19-2007, 09:14 PM | #4 |
Registered User
Join Date: Oct 2006
Location: Owasso, OK
Posts: 297
|
Re: CD 6 Player Problems - $90.00 Solution
Didn't think about Harbor Freight.
Another important point...These guys told me if our radios are shipped without a "shipping plug", all it takes is a good jolt to screw up the CD trays. Most resellers (online salvage yards) don't know this. -that big yellow caution placard isn't there for looks.
__________________
`03 Torch Red Mach |
07-06-2007, 01:51 AM | #5 |
Space Olympics
Join Date: Mar 2004
Location: To The East
Posts: 1,343
|
Re: CD 6 Player Problems - $90.00 Solution
OEM CD players have had issues for a long time. I rented a 2001 mustang 5 years ago and it was locking up. My '03 GT cd player started to lock up on me occasionally at 7,000 miles. My mach CD player died in September 2005. You'd think they'd do something about this.
__________________
: D
|
04-03-2008, 12:16 PM | #6 |
Admin/Founder
Join Date: Aug 2002
Location: Cuba, NY
Posts: 6,805
|
Re: CD 6 Player Problems - $90.00 Solution
I know the mutli changers do NOT recommend CD's with "Paper Labels" on them, it can jam. It states in the owners manual, Only the direct print type CD's or if you make them yourself, just label them with a felt tip pen.
__________________
David J. Wagner Founder/Admin Member #0001 http://www.Mach1Registry.com http://www.Mach1Performance.org Amsoil T-1 Certified Independant Dealer Member, MCA '03 Mach 1, '08 V6 WIP, 76 Cobra II VIN#301788 |
06-24-2008, 08:04 PM | #7 |
Guest
Join Date: Mar 2008
Location: Lebanon Ohio
Posts: 9
|
Re: CD 6 Player Problems - $90.00 Solution
i have the 6 disc changer and it is broke this is the fouth time and my cd's are stuck i found someone who could fix the cd changer but it will cost me $320.00 but the problem is i do not want this radio any more what can i do please help
|
06-24-2008, 08:14 PM | #8 |
Registered User
Join Date: Dec 2007
Location: Toccoa, Ga
Posts: 567
|
Re: CD 6 Player Problems - $90.00 Solution
Buy one used on the registry or ebay. Be sure to get the right one for your year model.
Edit nevermind didn't fully read your post I guess for cheap you can buy the harness and use an aftermarket cd player, but most will recomend ditching the whole 460 system. It sucks, but if my 6 disc craps out on me thats probly what i'll do
__________________
03 TR Mach1 -RIP -Mac O/R H -Slp Catback with Super 44's -18" DD Chrome Bullitts |
06-24-2008, 08:37 PM | #9 |
Guest
Join Date: Mar 2008
Location: Lebanon Ohio
Posts: 9
|
Re: CD 6 Player Problems - $90.00 Solution
have you had any problems with yours
|
06-24-2008, 11:05 PM | #10 |
Registered User
Join Date: Dec 2007
Location: Toccoa, Ga
Posts: 567
|
Re: CD 6 Player Problems - $90.00 Solution
in my 02 gt it had problems ejecting cd's but it was easy to get them out.
In the mach, no problems at all.
__________________
03 TR Mach1 -RIP -Mac O/R H -Slp Catback with Super 44's -18" DD Chrome Bullitts |
07-09-2011, 05:42 PM | #11 |
Charles U. Farley
Join Date: Jun 2006
Posts: 1,112
|
Re: CD 6 Player Problems - $90.00 Solution
0 dollar solution! I figured if a yanked it out and broke something, it was about time for a new one anyway. The unit is held in by to 7mm bolts, I think I saw 8mm posted earlier.
Three plugs, the clips are on the bottom. Then pull the antenna plug. The whole thing comes apart with a T-10 bit and a phillips head screw driver. I just kept unscrewing things until I could separate the cd changer from the rest of the radio. The racks slide up and down on little plastic posts. If you gently move the clips back you can slide the trays up and down. Pulled out the jammed cd and put it all back together And what do you know......It actually works again 8 Years into the Mach, and The Registry is still a priceless sorce of information. Thanks to the wisdom of all those that came before me!
__________________
En tequila es verdad. |
07-10-2011, 05:50 AM | #12 | |
Registered User
Join Date: Feb 2007
Location: Phoenix
Posts: 163
|
Re: CD 6 Player Problems - $90.00 Solution
Quote:
|
|
08-18-2011, 10:40 AM | #13 |
Laid Back
Join Date: Nov 2009
Location: Missouri
Posts: 1,054
|
Re: CD 6 Player Problems - $90.00 Solution
Really good info -
Haven't had any prohblem with mine yet but it's always better to be knowledgeable & prepared...
__________________
"Red" hood and side stripes from Graphic Express.com |
08-18-2011, 11:48 AM | #14 |
Mustang Fanatic
Join Date: Jun 2009
Location: Dacula, GA
Posts: 963
|
Re: CD 6 Player Problems - $90.00 Solution
I fixed my CD player by getting an iPod adapter and hooking it up to the sat input. No more jammed cd's!
|
09-15-2011, 11:36 AM | #15 |
Always Sideways
Join Date: Apr 2009
Location: Port Richey, Florida
Posts: 169
|
Re: CD 6 Player Problems - $90.00 Solution
|
01-04-2012, 07:13 PM | #16 |
Registered User
Join Date: May 2007
Location: San Antonio,Tx
Posts: 156
|
Re: CD 6 Player Problems - $90.00 Solution
[/QUOTE]8 Years into the Mach, and The Registry is still a priceless sorce of information. Thanks to the wisdom of all those that came before me![/QUOTE]
Couldnt have said it better. |
01-04-2012, 09:39 PM | #17 |
Registered User
Join Date: Mar 2010
Location: Knoxville, TN
Posts: 323
|
Re: CD 6 Player Problems - $90.00 Solution
|
01-05-2012, 06:51 AM | #18 |
i bet my car is faster...
Join Date: Nov 2009
Location: New Orleans, La
Posts: 590
|
Re: CD 6 Player Problems - $90.00 Solution
04's have the sat only i do believe. I have an 03 but also have the ipod hookup. Just had to unplug the cd changer and plug the ipod connector that comes with the kit in its place and i've had an ipod hookup (iphone 4s in my case) hookup for over a year now i'll find a link and take a pic of my little setup for you to be jealous
__________________
WHO DAT!! ~~~~~~~~~~~~~~~~ 03 DSG Mach 1 5spd IUP Typical Bolt Ons 296hp/331tq?? on MustangDyno?? Best Time:12.83@106 1.72 60ft |
01-05-2012, 07:23 AM | #19 |
Mustang Fanatic
Join Date: Jun 2009
Location: Dacula, GA
Posts: 963
|
Re: CD 6 Player Problems - $90.00 Solution
It's on the back of the radio in my '04. I'm putting my car back to stock to sell, so I'll be selling my PIE aux adapter soon. I just got an '03 Cobra so I'm going to have to order a slightly different one for it.
|
01-05-2012, 08:16 AM | #20 |
Registered User
Join Date: Jul 2008
Location: Hell, Indiana
Posts: 584
|
Wow... people wanting to fix stock stereo? Think if mine ever quits I will go aftermarket anyway! Anyone interested in an 03 before it breaks? Lol
Sent from INDIANA - Home of 236,745,944 highway construction barrels... |
01-05-2012, 09:29 AM | #21 |
Registered User
Join Date: Mar 2010
Location: Knoxville, TN
Posts: 323
|
Re: CD 6 Player Problems - $90.00 Solution
I like the stock look. If i had an ipod jack I'd NEVER listen to cds. Or attempt to listen to them as it is most of the time lol
|
01-16-2012, 12:32 AM | #22 |
Registered User
Join Date: May 2005
Location: Woodstock,GA
Posts: 544
|
Re: CD 6 Player Problems - $90.00 Solution
pie makes a kit for 2003 radios. I just installed mine as part of my new years resolution . I have limited control of the ipod through the stock head unit. I can't believe I let that stuff sit in my closet for almost a year.
|
01-16-2012, 01:35 PM | #23 |
Registered User
Join Date: Dec 2011
Location: N. Sioux City, SD
Posts: 35
|
Re: CD 6 Player Problems - $90.00 Solution
what do you need to plug in your ipod in to the satellite radio part?
|
06-12-2012, 03:58 PM | #24 | |
Registered User
Join Date: Jun 2012
Location: Irmo, SC
Posts: 12
|
Re: CD 6 Player Problems - $90.00 Solution
Quote:
http://www.amazon.com/FRDN-AUX-PIE-A..._172282_a1_4_p This kit includes an RCA-to-3.5 audio adapter (plugs into PIE adapters RCA port) along with an extended auxiliary port that you can mount on a panel (I mounted mine at the bottom of the stereo surrounding panel) and cable to plug into your iPod/Pad/Phone/MP3 device or sat radio. http://www.amazon.com/PAC-IS335-3-5-...pd_sim_sbs_e_1 |
|
08-19-2018, 02:17 PM | #25 |
Dawg fan
Join Date: May 2003
Location: SWGA
Posts: 153
|
Re: CD 6 Player Problems - $90.00 Solution
Well boo this company is no longer in business. I know I'm the odd ball but I want to fix mine or repair it. I can't seem to find an aftermarket one that will load 6 CD's? Anyone know of a repair shop?
__________________
SOLD 8/28/20 Azure Blue 5 speed non IUP Build date 4/17/03: Bought 5/12/03 Performance Mods: K&N FIPK, MagnaPack Cat Back, MGW Shifter, PHP intake spacer, Shaker air diverter, MAC Prochamber H pipe-PC9900, SCT X3 tuner from VMPtuning.com Visual Mods: Cyberdyne water temp gauge, raised shaker, removed gas pedal slack, Anti-Theft Valve Stem caps, Hurst shift ball, window tint, vinyl letters on bumper, & billet pedals. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|