2003-04 Mach 1 Registry Owners Club  

Best Mustang Parts

Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 06-12-2019, 06:29 PM   #1
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 358
Finally got a procharger

After wanting a procharger for years even when I still had my red Mach 1 I finally bought one and installed it this past weekend only snag I ran into was clearancing the valve cover. I’m also going to be tuning the car myself so I’ll be looking forward to that









Sent from my iPhone using Tapatalk
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is online now   Reply With Quote
Old 06-13-2019, 05:10 PM   #2
311-420
#6956
 
311-420's Avatar
 
Join Date: Sep 2007
Location: +♤$
Posts: 6,843
Re: Finally got a procharger

Congrats man! Boost is so fun with a 4v, even low boost. Looks clean and classy under the hood, not overdone. Very similar to how I did mine.
__________________
2004 Oxford White
5spd IUP Eaton
452/409
311-420 is offline   Reply With Quote
Old 06-13-2019, 07:12 PM   #3
mikesbird
Registered User
 
mikesbird's Avatar
 
Join Date: May 2018
Location: Cleveland, OH
Posts: 15
Re: Finally got a procharger

Agree, that looks great!
mikesbird is offline   Reply With Quote
Old 06-13-2019, 09:32 PM   #4
CandMBennett
Registered User
 
CandMBennett's Avatar
 
Join Date: Jun 2018
Location: Tyrone,PA
Posts: 41
Re: Finally got a procharger

Love the looks of the set up! Be sure to keep us posted on the build 😊
CandMBennett is offline   Reply With Quote
Old 06-13-2019, 10:01 PM   #5
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 358
Thanks guys, I’ve been working on my tune, I went out for some logging yesterday and it’s looking good so far. A few small tweaks left to do. I also need to buy another coupler for my maf. I upgraded my maf and the kit only came with couplers for the stock maf which are too big for the 3” tube on my new maf, I bought a temporary one at the local parts store and it blew off on me last night. Popped it back on and called it a night till the new proper coupler comes in.




Sent from my iPhone using Tapatalk
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is online now   Reply With Quote
Old 06-13-2019, 11:44 PM   #6
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 4,982
Re: Finally got a procharger

very nice. looks clean
__________________
JB

03 Torch Red Mach 1
2019 Shadow Black PP1 GT 6M

Stainless Steel Systems Adrenaline Series
18x9 - Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
Eibach Sway Bars
jbrad88 is offline   Reply With Quote
Old 06-14-2019, 12:55 AM   #7
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 118
Re: Finally got a procharger

Nice!
Love boosted Mach's
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 06-14-2019, 09:28 AM   #8
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 358
Thanks everyone, I loaded up my revision tune last night and my wideband is still showing rich but it’s running really good so I guess I’ll have to do more logging and make a few more adjustments

Here are some more pics for fun








Sent from my iPhone using Tapatalk
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is online now   Reply With Quote
Old 06-14-2019, 10:38 AM   #9
311-420
#6956
 
311-420's Avatar
 
Join Date: Sep 2007
Location: +♤$
Posts: 6,843
Re: Finally got a procharger

Quote:
Originally Posted by machdude View Post
Here are some more pics for fun

That's a shot right there.

Which headunit is that? What are the rest of the mods/fuel system?
__________________
2004 Oxford White
5spd IUP Eaton
452/409
311-420 is offline   Reply With Quote
Old 06-14-2019, 03:39 PM   #10
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 358
Finally got a procharger

Quote:
Originally Posted by 311-420 View Post
That's a shot right there.



Which headunit is that? What are the rest of the mods/fuel system?


It’s a D1SC headunit, 60lb injectors with a deatschwerks 340lph pump. PMAS slot style Maf with a 3 inch tube. The setup is supposed to be good to around 600hp but I’m not going anywhere near that for now since I’m on the stock bottom end. I have a set of Manley rods on the shelf just waiting for more funds to do the built engine, by then I’ll probably upgrade the whole fuel system to return style with dual pumps.

Don Lasota sent me a start up tune with the SCT software I bought since I also purchased his book but at the time he sent me that he wrote the tune for the stock maf so I went and re-wrote the maf transfer portion of it (which is the heart of the tune) to make it all work

Only other mods the car has is full exhaust from the exhaust manifolds back with an X-pipe and 3.73’s
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is online now   Reply With Quote
Old 06-15-2019, 10:06 AM   #11
gfong
Greg Fonger
 
gfong's Avatar
 
Join Date: May 2004
Location: Ontario, Canada
Posts: 3,405
Re: Finally got a procharger

Looks really nice man.
__________________
03 Torch Red Mach 1
5 spd, IUP
Respect the mans car, the man respects you
gfong is offline   Reply With Quote
Old 06-25-2019, 06:39 PM   #12
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 117
Re: Finally got a procharger

What size pulley are you running with that D1SC, since you still have the stock rotating assembly?
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 06-26-2019, 08:44 AM   #13
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,234
Re: Finally got a procharger

nice looking setup, hadn't seen the black head unit before until it started popping up on IG the other day
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 06-26-2019, 01:18 PM   #14
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 358
Quote:
Originally Posted by DSG2003Mach1 View Post
nice looking setup, hadn't seen the black head unit before until it started popping up on IG the other day


Thank you, the one on IG is my car and I have not seen another Mach with the black setup except for a red Mach but it looked possibly powder coated and put together kit. Mine is straight from procharger, I was pleasantly surprised to see all the piping also came in black.


Sent from my iPhone using Tapatalk
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is online now   Reply With Quote
Old 06-26-2019, 01:19 PM   #15
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 358
Quote:
Originally Posted by SouthKak_Mach1 View Post
What size pulley are you running with that D1SC, since you still have the stock rotating assembly?


I didn’t measure the pulley but it’s probably a 4” or 4.15” it’s making 8psi right at 7k rpm and yes still the stock rotating assembly


Sent from my iPhone using Tapatalk
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is online now   Reply With Quote
Old 07-07-2019, 02:26 AM   #16
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 358
200 miles on the blower and tune, inspected my plugs today and I must say I’m pretty happy with them, they all look like this pic. Also double checked the gap at .034




Sent from my iPhone using Tapatalk
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is online now   Reply With Quote
Old 08-24-2019, 08:04 AM   #17
BONESTOCK
Registered User
 
Join Date: Jul 2004
Location: MA
Posts: 1,993
Re: Finally got a procharger

Nice!
__________________
2004 Torch Red Procharged Mach 1
BONESTOCK is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:56 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<