Removing Valve Covers and Installing Cobra Cams - A Complete How To With Pics

[SBT STANG]

Originally Posted by Mach828

Did you do these?
Take the motor mount nut off on the drivers side
Back off the passenger side nut
Tilt the motor quite a bit
Disconnect the sensor on the brake reservoir
Bend the oil dipstick towards the drivers side fender
Take off all the bolts holding the covers on
Take off the firewall clutch adjuster (either factory or OEM)
Take off the bracket that holds the power steering reservoir in front of the drivers side cover

Once you get the cover to clear the brake booster, its still won't come off all the way. Once it clears the brake booster, lower the motor a bit, and then you have to wiggle it on out.

This is the way i just did mine and wow it was intimidating at first but with a little wiggling and some patience it came right out and went back in the same.Deff. and awesome write up!!!
Thank you.