WTB: few parts - 2003-04 Mach 1 Registry Owners Club

dino · 09-01-2013, 06:59 PM

general 99-04:

01-early 03 Mach 460 Radio. or possibly a double DIN aftermarket if it comes with harness.

door cup(piece that goes over switch panels) - driver side for a 99-04 VERT. dark charcoal.

5 speed "03 cobra style" shift knob. And a stock 99-04 one will do just fine. need 2 total.

machgsxr · 09-01-2013, 11:11 PM

Quote:

Originally Posted by dino

general 99-04:

door cup(piece that goes over switch panels) - driver side for a 99-04 VERT. dark charcoal.

shift knob. would love the 5 speed "03 cobra style" but a stock 99-04 one will do just fine. need 2.

a catback, stock or economical after market

Ford oval emblems from trunk.

4v-specific:

need coolant hoses

intake tube(or an economical cold air kit) for 99/01 cobra or 03/04 mach.

I can help you with above.

Catback has flowmasters welded in, but also have stock mufflers if wanted.

1 of the 2 shift knobs is a banged up on top.

Have ford oval emblem and mach, but no GT.

Prefer to keep the door cups together, so it would be both passenger and drivers side.

Ill have to check to see if i have an extra maf.

TRMach1 · 09-01-2013, 11:43 PM

Quote:

Originally Posted by dino

general 99-04:

01-early 03 Mach 460 Radio. or possibly a double DIN aftermarket if it comes with harness.

door cup(piece that goes over switch panels) - driver side for a 99-04 VERT. dark charcoal.

shift knob. would love the 5 speed "03 cobra style" but a stock 99-04 one will do just fine. need 2.

possibly a driver's seat - dark charcoal leather - mine has a tear, but not horrible.

a catback, stock or economical after market

Ford oval and GT emblems from trunk.

4v-specific:

need coolant hoses

intake tube(or an economical cold air kit) for 99/01 cobra or 03/04 mach.

6-pin maf and maf harness

What's your budget on the shift knob? I have a stock Mach 1 5-speed knob in mint condition. Tell me how much you want to spend.

I also have a complete stock Mach 1 intake tube from throttle body to air filter, minus the maf sensor, and the tube from the air filter to the shaker. Tell me what you want to spend.

dino · 09-02-2013, 04:07 PM

Quote:

Originally Posted by machgsxr

I can help you with above.

Catback has flowmasters welded in, but also have stock mufflers if wanted.

1 of the 2 shift knobs is a banged up on top.

Have ford oval emblem and mach, but no GT.

Prefer to keep the door cups together, so it would be both passenger and drivers side.

Ill have to check to see if i have an extra maf.

i can find an excuse to make an SA run again...
shoot me a price on all of it. is the door piece for a convertible?
which version of shift knob? don't have to be perfect.

Quote:

Originally Posted by TRMach1

What's your budget on the shift knob? I have a stock Mach 1 5-speed knob in mint condition. Tell me how much you want to spend.

I also have a complete stock Mach 1 intake tube from throttle body to air filter, minus the maf sensor, and the tube from the air filter to the shaker. Tell me what you want to spend.

not looking for a mach knob. i prefer the palm of my hand to not be toasted every time i get in the car. lol.
i think i found the intake tube in my storage stash. don't need a shaker tube.

looks like i may just put a 2v back in the car anyway.

03sh8ker · 09-02-2013, 05:15 PM

Is this what your looking for???

Rickmont89 · 09-02-2013, 09:48 PM

Quote:

Originally Posted by dino

general 99-04:

01-early 03 Mach 460 Radio. or possibly a double DIN aftermarket if it comes with harness.

door cup(piece that goes over switch panels) - driver side for a 99-04 VERT. dark charcoal.

shift knob. would love the 5 speed "03 cobra style" but a stock 99-04 one will do just fine. need 2.

possibly a driver's seat - dark charcoal leather - mine has a tear, but not horrible.

a catback, stock or economical after market

Ford oval and GT emblems from trunk.

4v-specific:

need coolant hoses

intake tube(or an economical cold air kit) for 99/01 cobra or 03/04 mach.

6-pin maf and maf harness

I have a stock double din from my Mach, I'm not really sure what they go for, but make me an offer.

Murder Snake · 09-03-2013, 05:06 PM

have the trunk emblem and also a stock 96 Cobra leather knob if you are interested.

GhostRiderblk · 09-04-2013, 06:08 PM

i have factory 6 pin maf. maybe 5k miles on it

UmachnMe? · 09-05-2013, 09:52 AM

I have a radio also.
PM me if you need it.

dino · 09-06-2013, 10:30 PM

I'll pm all of y'all Sunday when I get back to a computer.

Sent from a phone smarter than myself.

dino · 09-09-2013, 07:11 PM

Updated post with what I still need.
Sending pm's to radio and knob folks

Sent from a phone smarter than myself.

dino · 09-09-2013, 07:15 PM

Quote:

Originally Posted by machgsxr

I can help you with above.

Catback has flowmasters welded in, but also have stock mufflers if wanted.

1 of the 2 shift knobs is a banged up on top.

Have ford oval emblem and mach, but no GT.

Prefer to keep the door cups together, so it would be both passenger and drivers side.

Ill have to check to see if i have an extra maf.

very interested in the door piece if for a 'vert. Texted you but msy have an old number.

Quote:

Originally Posted by 03sh8ker

Is this what your looking for???

shoot me a price on knob or both.

Quote:

Originally Posted by Rickmont89

I have a stock double din from my Mach, I'm not really sure what they go for, but make me an offer.

not sure. Used to be 50-80 but I haven't looked for one in a couple years.

shoot me price and pic.

Quote:

Originally Posted by UmachnMe?

I have a radio also.
PM me if you need it.

Shoot me a price and a pic.

Sent from a phone smarter than myself.

03sh8ker · 09-09-2013, 07:32 PM

Pm'd price

dino · 10-12-2013, 09:06 PM

Don't believe I ever got any radio prices. If you have one, shoot me a price. 01-03, mach 460, non satellite.

Sent from my SCH-I545 using Tapatalk

dino · 10-12-2013, 09:06 PM

And still looking for a cold air kit for mach/cobra. And a couple cheap shift knobs.

Sent from my SCH-I545 using Tapatalk

09-01-2013, 06:59 PM	#1
dino Registered User Join Date: Jun 2006 Location: waller, tx Posts: 1,225	WTB: few parts general 99-04: 01-early 03 Mach 460 Radio. or possibly a double DIN aftermarket if it comes with harness. door cup(piece that goes over switch panels) - driver side for a 99-04 VERT. dark charcoal. 5 speed "03 cobra style" shift knob. And a stock 99-04 one will do just fine. need 2 total. __________________ '07.5 Duramax. '12 Cruze. '03 Mach. 2x GT. John Deere 790. Bunch of Arctic Cats in pieces. 2 kitchen sinks, and a Partridge in a pear tree.

09-02-2013, 05:15 PM	#5
03sh8ker Registered User Join Date: Dec 2012 Location: Crockett, Ca Posts: 289	Re: WTB: few parts Is this what your looking for??? Attached Thumbnails __________________ Black 2003 Mach 1-5spd, IUP, K&N FIPK, Flowmaster American Thunder catback, MRT catted H, Steeda Tri-ax, Brembo slotted rotors, Black AFS 17x9 & 17x10.5 Mach wheels

09-03-2013, 05:06 PM	#7
Murder Snake Registered User Join Date: Apr 2004 Location: florida Posts: 2,194	Re: WTB: few parts have the trunk emblem and also a stock 96 Cobra leather knob if you are interested. __________________ 1996 Cobra #6840 formerly, Frankenstang Two defining forces died for you. Jesus Christ died for your soul. The American Soldier died for your freedom. Think about it. "....be the lightning in me that strikes relentless." "It's a lot easier to pacify a country when it's citizens can't shoot back" Gray Anderson, Mayor, "Jericho"

09-04-2013, 06:08 PM	#8
GhostRiderblk Mammoth mach Join Date: Aug 2009 Location: Florida Posts: 715	Re: WTB: few parts i have factory 6 pin maf. maybe 5k miles on it __________________ 2.8 Kb Mammoth LC Manley pistons teflon coated Manley Rods Arp hw nx N20 kit

09-05-2013, 09:52 AM	#9
UmachnMe? never ending project Join Date: Dec 2003 Location: Columbia, SC Posts: 605	Re: WTB: few parts I have a radio also. PM me if you need it. __________________ tuned by ProDyno in Fort Mill 540 hp (5200 rpm) 490 tq I/W 15% OD pulley Vortech V2SQ forged S/B by VT performance Cobra tank with twin GT pumps BBK Long Tubes, custom O/R X w/ magnaflow mufflers 18"x9" AFS Mach 1 wheels Dimpled and slotted rotors MM front coil over kit with Bilstein HD struts MM adjustable LCAs and adjustable pan hard bar MM hd torque arm /removed factory upper arms Rebuilt 3650 / new syncros and shifter forks / Hurst BP RAM HD 950 dual disk clutch and FRP alum d/s

09-06-2013, 10:30 PM	#10
dino Registered User Join Date: Jun 2006 Location: waller, tx Posts: 1,225	I'll pm all of y'all Sunday when I get back to a computer. Sent from a phone smarter than myself. __________________ '07.5 Duramax. '12 Cruze. '03 Mach. 2x GT. John Deere 790. Bunch of Arctic Cats in pieces. 2 kitchen sinks, and a Partridge in a pear tree.

09-09-2013, 07:11 PM	#11
dino Registered User Join Date: Jun 2006 Location: waller, tx Posts: 1,225	Updated post with what I still need. Sending pm's to radio and knob folks Sent from a phone smarter than myself. __________________ '07.5 Duramax. '12 Cruze. '03 Mach. 2x GT. John Deere 790. Bunch of Arctic Cats in pieces. 2 kitchen sinks, and a Partridge in a pear tree.

09-09-2013, 07:32 PM	#13
03sh8ker Registered User Join Date: Dec 2012 Location: Crockett, Ca Posts: 289	Re: WTB: few parts Pm'd price __________________ Black 2003 Mach 1-5spd, IUP, K&N FIPK, Flowmaster American Thunder catback, MRT catted H, Steeda Tri-ax, Brembo slotted rotors, Black AFS 17x9 & 17x10.5 Mach wheels

10-12-2013, 09:06 PM	#14
dino Registered User Join Date: Jun 2006 Location: waller, tx Posts: 1,225	Don't believe I ever got any radio prices. If you have one, shoot me a price. 01-03, mach 460, non satellite. Sent from my SCH-I545 using Tapatalk __________________ '07.5 Duramax. '12 Cruze. '03 Mach. 2x GT. John Deere 790. Bunch of Arctic Cats in pieces. 2 kitchen sinks, and a Partridge in a pear tree.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)