2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 07-24-2014, 12:49 AM   #101
Vndcatr
SVT
 
Vndcatr's Avatar
 
Join Date: Jun 2010
Location: Northern California
Posts: 812
Re: Starting my Build

Quote:
Originally Posted by SuperMach1 View Post
It's a Stewart Components water pump. http://m.summitracing.com/parts/emp-ste50046s nothing special really.
Arent they one of the highest flowing mechanical water pump ? i might be wrong here, i just always see guys using them so they must be good !.
__________________
2001 Zinc yellow SVT Cobra
Forged 11.5CR 284ci
Comp 106500 cams - Degreed
01 cobra Heads - tastefully modded
Roys ported/polished Intake
Kooks longtubes, Magnaflow catback
D&D T3650, Mgw shifted
FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS
04 cobra interior , black termy seats, Speedhut gauges
Tubular K, MM coilovers/ Koni SA yellows
Starkweather tuned, 24* timing on 91 octane
11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs

Next up:Sullivan intake and hat, self tuning..
Vndcatr is offline   Reply With Quote
Old 07-24-2014, 05:21 PM   #102
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by Vndcatr View Post
Arent they one of the highest flowing mechanical water pump ?
Yes, so I've read. I haven't seen any bad reviews about it either. I saw a couple reviews of guys saying they're no good but never owned one lol.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 07-27-2014, 06:54 AM   #103
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Stewart water pump



__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 07-27-2014, 06:56 AM   #104
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Carbon Fiber radiator cover

__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 07-27-2014, 06:58 AM   #105
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

17x4 Race Stars

__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 07-27-2014, 07:02 AM   #106
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

17x9.5 with 295/45/17 Mickey Thompson's. Should be good for the street

__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 08-25-2014, 08:46 PM   #107
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Starting my Build

any updates on this build. looks fun

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 08-26-2014, 05:49 PM   #108
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Been a little busy vacationing, just bought my first home with my first garage , and spending money on booze lol. But I just sent the oil pan to get dipped in carbon fiber earlier today. Once they're done with that I will be sending the pan and the valve covers to the builder. I'll see what progress has been done when I get there. Should be almost complete.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 08-27-2014, 10:46 AM   #109
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Starting my Build

Quote:
Originally Posted by SuperMach1 View Post
Been a little busy vacationing, just bought my first home with my first garage , and spending money on booze lol. But I just sent the oil pan to get dipped in carbon fiber earlier today. Once they're done with that I will be sending the pan and the valve covers to the builder. I'll see what progress has been done when I get there. Should be almost complete.
vacationing oh no, lol
I needed a vacation from my vacation, lol
sounds good just finally making it around to some of the threads.
enjoy the house too.
the drinking, just be safe and careful

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 09-13-2014, 08:46 PM   #110
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Painted the lettering on the COP covers. Came out decent.

http://www.moddedmustangs.com/forums...5-dsc_0306.jpg
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 09-13-2014, 10:37 PM   #111
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Starting my Build

that looks really nice

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 09-17-2014, 05:28 PM   #112
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Thanks Ash, I f'd up the first one a little bit. The second one came out way better.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 09-25-2014, 11:29 PM   #113
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Carbon fiber dipped Canton 7qt pan.
http://www.moddedmustangs.com/forums...5-dsc_0345.jpg
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 10-02-2014, 08:39 AM   #114
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Short block assembled. Also ceramic coated the top of the pistons as you can see. Anyone know what the compression would be with the flat tops? I'm thinking 11.1
http://www.moddedmustangs.com/forums...5-dsc_0383.jpg
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 10-02-2014, 10:25 AM   #115
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Starting my Build

Sweet bro. Picked up a 2013 5.0 track pack!
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 10-02-2014, 03:43 PM   #116
Vndcatr
SVT
 
Vndcatr's Avatar
 
Join Date: Jun 2010
Location: Northern California
Posts: 812
Re: Starting my Build

Quote:
Originally Posted by SuperMach1 View Post
Short block assembled. Also ceramic coated the top of the pistons as you can see. Anyone know what the compression would be with the flat tops? I'm thinking 11.1
http://www.moddedmustangs.com/forums...5-dsc_0383.jpg
looks good !, btw. Your going to need more info than that to determine final compression #'s. I used this to find out mine which is also 10.95:1 using a dome piston

http://www.csgnetwork.com/compcalc.html

No valve reliefs ??
__________________
2001 Zinc yellow SVT Cobra
Forged 11.5CR 284ci
Comp 106500 cams - Degreed
01 cobra Heads - tastefully modded
Roys ported/polished Intake
Kooks longtubes, Magnaflow catback
D&D T3650, Mgw shifted
FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS
04 cobra interior , black termy seats, Speedhut gauges
Tubular K, MM coilovers/ Koni SA yellows
Starkweather tuned, 24* timing on 91 octane
11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs

Next up:Sullivan intake and hat, self tuning..
Vndcatr is offline   Reply With Quote
Old 10-02-2014, 04:15 PM   #117
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by SHAKN' 04 View Post
Sweet bro. Picked up a 2013 5.0 track pack!
Nice! Send me some pics.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 10-02-2014, 04:17 PM   #118
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by Vndcatr View Post
looks good !, btw. Your going to need more info than that to determine final compression #'s. I used this to find out mine which is also 10.95:1 using a dome piston

http://www.csgnetwork.com/compcalc.html

No valve reliefs ??
No valve reliefs. Aren't Valve reliefs for guys using bigger cams? I'll be using 98 cobra cams.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.

Last edited by SuperMach1; 10-03-2014 at 04:56 AM.
SuperMach1 is offline   Reply With Quote
Old 10-09-2014, 04:57 PM   #119
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

My heads are 4 thread C heads so I decided to do some 9 thread time-serts. Pretty cool to see them get installed.


http://www.moddedmustangs.com/forums...5-dsc_0385.jpg
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 10-14-2014, 03:37 PM   #120
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

The engine has been pulled out!!! Waiting on my IW balancer now.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 10-15-2014, 10:05 AM   #121
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Starting my Build

Quote:
Originally Posted by SuperMach1 View Post
Thanks Ash, I f'd up the first one a little bit. The second one came out way better.
hey we have to learn some how, I've been trying my skill at re-doing 1:18 scale die cast cars. It takes time to build up a skill for it and I get told good work, but there is still improvement needed.

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 10-15-2014, 10:06 AM   #122
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Starting my Build

Quote:
Originally Posted by SuperMach1 View Post
The engine has been pulled out!!! Waiting on my IW balancer now.
oh sweet deal. I member when I finally got word the motor was pulled, happy days, just wait when it all gets put back together and get to drive her,

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 10-30-2014, 07:15 PM   #123
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Balancer is here. My bbk lts look like sh!t so I bought a set of Mac ceramic lts.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 11-12-2014, 05:49 AM   #124
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Engine is ready and cams have been degreed to 114/114. Also sold my pypes m80 mufflers for a set of mac 3 inch flowpaths.

http://www.moddedmustangs.com/forums...5-img_8164.jpg

http://www.moddedmustangs.com/forums...5-img_1450.jpg
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 11-12-2014, 07:19 AM   #125
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Starting my Build

Hell yea bro. Can't wait to see what it does when it's all done.
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:08 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<