2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 11-20-2011, 09:29 PM   #451
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: Custom Intake Carbureted & Nitrous Setup

My Mach has a lot of weight reduction, so the aeromotive brakes work good. In the begining, I had to do a lot of modifications to the brake hubs/rotors to my rear axles (with C-clip eliminators) to get the right caliber to rotor alingment.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 11-20-2011, 09:37 PM   #452
devous1
Chairman of "The Bored"
 
devous1's Avatar
 
Join Date: Sep 2004
Location: A CORNFIELD IN OH
Posts: 2,001
Re: Custom Intake Carbureted & Nitrous Setup

I remember your issues, I think I'll be ordering my brakes soon. Just don't know about Aero or Strange.
__________________
2014 GT500 Black/Black

03 TORCH RED MACH
V7 YSI and Some Other Stuff
03 DSG MACH
90 Kenny Brown Super LX
89 LX BBF as seen on Pinks 5/11-SOLD
11 F450 Lariat
A Couple Tuber Buells
devous1 is offline   Reply With Quote
Old 11-22-2011, 05:17 PM   #453
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by devous1 View Post
I remember your issues, I think I'll be ordering my brakes soon. Just don't know about Aero or Strange.
If your not installing C-clip eliminators, then you will be OK with the Aerospace rotor/calipers.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 11-22-2011, 09:04 PM   #454
devous1
Chairman of "The Bored"
 
devous1's Avatar
 
Join Date: Sep 2004
Location: A CORNFIELD IN OH
Posts: 2,001
Re: Custom Intake Carbureted & Nitrous Setup

I did an Moser M9, I guess I'll call Aero and see what they suggest. I think I'm gonna go ahead and go manual as well. This is killing me I've only put about 100 mi on this car in the last 5 or 6 yrs.
__________________
2014 GT500 Black/Black

03 TORCH RED MACH
V7 YSI and Some Other Stuff
03 DSG MACH
90 Kenny Brown Super LX
89 LX BBF as seen on Pinks 5/11-SOLD
11 F450 Lariat
A Couple Tuber Buells
devous1 is offline   Reply With Quote
Old 12-31-2011, 08:15 PM   #455
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: Custom Intake Carbureted & Nitrous Setup

I bought this trans new and sent it to Liberty Gears in Michigan for the works. They installed a 26 spline input shaft, face plated 2nd-4th gear. All internal gears were micronited, heat treated & cryo-treated. Tranny still has 5th gear. The gears are the same ratio as the factory Mach 1 3650 trans. The trans has about 350 miles on it at max, just broken in. No track time on this trans, only dyno rollers and very little street time. Changed tranny fluid last month. Comes with a Pro 5.0 shifter. I have all original reciepts for this trans and I'm the original owner. It will require a 26 spline clutch assembly and bell housing to 4.6L DOHC motor. This trans shifts like butter at 8500 rpm's. This was tested by me a few times.

Trans is still in my Mach 1 at CRT Performance in Norwalk, Ohio stored for the winter since October 2011. I've decided to go with a Lenco ST1200 trans.

Contact me for price!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 05-27-2012, 07:36 PM   #456
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: Custom Intake Carbureted & Nitrous Setup

Took my son for a quick ride this weekend in the Mach. Shifting at 8,000 rpms N/A.. I'm going to be testing out a 75 shot in the next few days.

http://www.youtube.com/watch?v=4gbRU...ature=youtu.be
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 05-27-2012, 09:44 PM   #457
White04Mach
Stab n' Steer!
 
White04Mach's Avatar
 
Join Date: Jun 2008
Location: Carey, Ohio
Posts: 1,137
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by Phil View Post
Took my son for a quick ride this weekend in the Mach. Shifting at 8,000 rpms N/A.. I'm going to be testing out a 75 shot in the next few days.

http://www.youtube.com/watch?v=4gbRU...ature=youtu.be
Sweet Jebus....
__________________
2004 White Mach 1, 5 Speed, IUP 18k miles Sold 01/10/15
Ford C springs, MM Adjustable lower control arms, DD Mach rims, Honeycomb panel, sequential turn signals, modded Bullitt skirts, wingless decklid, Cobra mirrors, Flowmaster 40's, Fiore quadrant and firewall adjuster, 4.10's, Shelby diff cover, MGW shifter, Raptor shift light.
White04Mach is offline   Reply With Quote
Old 05-27-2012, 11:36 PM   #458
Tommy Z
Registered User
 
Tommy Z's Avatar
 
Join Date: Jun 2011
Location: Midland, Texas
Posts: 787
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by Phil View Post
Took my son for a quick ride this weekend in the Mach. Shifting at 8,000 rpms N/A.. I'm going to be testing out a 75 shot in the next few days.

http://www.youtube.com/watch?v=4gbRU...ature=youtu.be
Faaaaake! Ha, just kidding...But seriously, that shift to 3rd was insane!
__________________
No accident that my birthday is March 1st. Take out the 'r' and you end up with....


2003 Torch Red Mach 1
★ Rebuilt 3650 & MGW
★ Spec 2 & Fidanza flywheel
★ H&R Super Sports & Maximum Motorsports struts/shocks
★ Maximum Motorsports rear lowers, MM panhard, MM caster camber plates
★ Mosers + ARPs
★ Brembo slotted rotors, braided lines
★ Catless X and SLP LM2s
★ 18X9/10.5 - Toyo R888R
Tommy Z is offline   Reply With Quote
Old 05-28-2012, 12:04 AM   #459
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by Tommy Z View Post
Faaaaake! Ha, just kidding...But seriously, that shift to 3rd was insane!
LOL!!

Liberty Gears in Michigan built my TKO-500 and it shifts like butter! Going into 3rd feels like I'm using an auto trans slap stick. This was also having 28" M/T street radials! My M/T drag tires and rims are a total of 24 lbs lighter (rotating weight) then the rear combo I currently have for the street!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 05-29-2012, 01:02 AM   #460
Tommy Z
Registered User
 
Tommy Z's Avatar
 
Join Date: Jun 2011
Location: Midland, Texas
Posts: 787
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by Phil View Post
LOL!!

Liberty Gears in Michigan built my TKO-500 and it shifts like butter! Going into 3rd feels like I'm using an auto trans slap stick. This was also having 28" M/T street radials! My M/T drag tires and rims are a total of 24 lbs lighter (rotating weight) then the rear combo I currently have for the street!
Yea, I caught that post that listed what all had been done to the trans, awesome stuff! I'm going for a fully built T56 soon.
__________________
No accident that my birthday is March 1st. Take out the 'r' and you end up with....


2003 Torch Red Mach 1
★ Rebuilt 3650 & MGW
★ Spec 2 & Fidanza flywheel
★ H&R Super Sports & Maximum Motorsports struts/shocks
★ Maximum Motorsports rear lowers, MM panhard, MM caster camber plates
★ Mosers + ARPs
★ Brembo slotted rotors, braided lines
★ Catless X and SLP LM2s
★ 18X9/10.5 - Toyo R888R
Tommy Z is offline   Reply With Quote
Old 05-31-2012, 07:56 PM   #461
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by Tommy Z View Post
Yea, I caught that post that listed what all had been done to the trans, awesome stuff! I'm going for a fully built T56 soon.
I would send it to Liberty's Gears!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 09-19-2012, 10:36 PM   #462
halemach1
Registered User
 
Join Date: Oct 2009
Location: fordyce, arkansas
Posts: 735
Re: Custom Intake Carbureted & Nitrous Setup

just figured i wound bump on over here and see if anything new has happened??
halemach1 is offline   Reply With Quote
Old 01-14-2014, 08:26 PM   #463
halemach1
Registered User
 
Join Date: Oct 2009
Location: fordyce, arkansas
Posts: 735
Re: Custom Intake Carbureted & Nitrous Setup

News??
halemach1 is offline   Reply With Quote
Old 01-14-2014, 08:41 PM   #464
machgsxr
Registered User
 
machgsxr's Avatar
 
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
Re: Custom Intake Carbureted & Nitrous Setup

He doesn't post much here anymore. I got ahold of him through his website or email.
machgsxr is offline   Reply With Quote
Old 07-09-2017, 12:19 PM   #465
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: Custom Intake Carbureted & Nitrous Setup

I'm back Gentlemen!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 07-09-2017, 06:13 PM   #466
devous1
Chairman of "The Bored"
 
devous1's Avatar
 
Join Date: Sep 2004
Location: A CORNFIELD IN OH
Posts: 2,001
Re: Custom Intake Carbureted & Nitrous Setup

Good to hear from ya, whats new with the car?
__________________
2014 GT500 Black/Black

03 TORCH RED MACH
V7 YSI and Some Other Stuff
03 DSG MACH
90 Kenny Brown Super LX
89 LX BBF as seen on Pinks 5/11-SOLD
11 F450 Lariat
A Couple Tuber Buells
devous1 is offline   Reply With Quote
Old 07-09-2017, 09:09 PM   #467
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Custom Intake Carbureted & Nitrous Setup

Welcome back, Phil!
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 07-09-2017, 09:46 PM   #468
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: Custom Intake Carbureted & Nitrous Setup

Glad to see ya back!
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 07-10-2017, 03:53 PM   #469
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: Custom Intake Carbureted & Nitrous Setup

no shiot!!!!!!!!!!!!! I was literally JUST talking about you with Roy Cole....
glad to see you back!!!!!!!!!!!!!!!!!!
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 07-10-2017, 05:19 PM   #470
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: Custom Intake Carbureted & Nitrous Setup

Thank you guys!

It was a ruff 3+ past years.. Working at getting the ole carbureted/nitrous Mach 1 back up and running!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 07-10-2017, 11:31 PM   #471
Vndcatr
SVT
 
Vndcatr's Avatar
 
Join Date: Jun 2010
Location: Northern California
Posts: 812
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by Phil View Post
Working at getting the ole carbureted/nitrous Mach 1 back up and running!
Sick!!
__________________
2001 Zinc yellow SVT Cobra
Forged 11.5CR 284ci
Comp 106500 cams - Degreed
01 cobra Heads - tastefully modded
Roys ported/polished Intake
Kooks longtubes, Magnaflow catback
D&D T3650, Mgw shifted
FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS
04 cobra interior , black termy seats, Speedhut gauges
Tubular K, MM coilovers/ Koni SA yellows
Starkweather tuned, 24* timing on 91 octane
11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs

Next up:Sullivan intake and hat, self tuning..
Vndcatr is offline   Reply With Quote
Old 07-11-2017, 11:42 AM   #472
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
Re: Custom Intake Carbureted & Nitrous Setup

Sweet!
__________________
  • Instagram: @azurblumach1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 07-11-2017, 07:18 PM   #473
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by Phil View Post
Thank you guys!

It was a ruff 3+ past years.. Working at getting the ole carbureted/nitrous Mach 1 back up and running!
make a new post on progress and changes...
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 07-12-2017, 10:11 PM   #474
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: Custom Intake Carbureted & Nitrous Setup

Will do!

I'm planning on removing the spark plugs and turn her over to get some oil psi built up. I have not started it up for over a year, yet alone driven it for over 3 yrs +. I'm also thinking of converting to Methanol alcohol..
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 07-14-2017, 06:25 PM   #475
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: Custom Intake Carbureted & Nitrous Setup

Quote:
Originally Posted by Phil View Post
Will do!

I'm planning on removing the spark plugs and turn her over to get some oil psi built up. I have not started it up for over a year, yet alone driven it for over 3 yrs +. I'm also thinking of converting to Methanol alcohol..
cool...will be looking forward to that for sure
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:48 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<