|
|
Power Adders Superchargers, Turbos, Nitrous, etc... |
|
Thread Tools | Display Modes |
|
02-09-2010, 10:05 AM | #1 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
NGK TR6 spark plug question "which one"
ok i was on lethalperformance.com and i couldn't figure out with plug to go with on my s/c set-up i was kinda confuesed on which plug to buy cuz they didn't have the part numbers on some of the thread i try to research on. one was ngk tr6 v-power spark plug and the other one was ngk tr6 Iridium Spark Plugs. which one should i get
here is the link if you wish to look yourself. http://www.lethalperformance.com/03-...-c-19_686_2337 |
02-09-2010, 10:15 AM | #2 |
LuLz
Join Date: Dec 2003
Location: Cedar Park, TX
Posts: 19,294
|
Re: NGK TR6 spark plug question "which one"
the regular vpower TR6 the non iridium.
__________________
11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away) |
02-09-2010, 10:29 AM | #3 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: NGK TR6 spark plug question "which one"
thanks for the quick respone i was about to click on my order and just wanted to make sure before i buy the wrong ones. thanks again. just tryin to get everything needed to make everything run right.
|
02-09-2010, 06:15 PM | #4 |
Mach1 member
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
|
Re: NGK TR6 spark plug question "which one"
Those prices are outrageous. Go to your local auto store and get part number 4177. Shouldn't be more than $16.00 and no shipping.
__________________
2011 Mustang GT Grabber Blue Automatic 2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD |
02-09-2010, 06:19 PM | #5 |
LuLz
Join Date: Dec 2003
Location: Cedar Park, TX
Posts: 19,294
|
Re: NGK TR6 spark plug question "which one"
yuppers, local oreilys sells them for like a 1.69 a piece here and there always in stock.
__________________
11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away) |
02-10-2010, 12:54 AM | #6 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: NGK TR6 spark plug question "which one"
lol thanks guys but i already order them after i got the answer, lol well what a couple of dollards more, i was ordering some other stuff from them and threw them in with them on the order. but i already got them now, i'll know next time. thanks though for the help. just so ya'll know i'm not a be waste of money type guy, its just 10 dollards on a part isn't that much more to spend, but i'll know next time, thanks for ya'll help on this. and the fast respones too
|
02-14-2010, 12:09 PM | #7 |
the Night Man
Join Date: Dec 2004
Location: Leander, TX
Posts: 984
|
Re: NGK TR6 spark plug question "which one"
I am installing TR6 plugs today in preparation for my procharger, possibly next week. I did search about them and it looks like the best gap is .044. I will drive the car some before it goes into the shop.
I think this topic has been discussed plenty. I will record my experiences here.
__________________
I plan ahead. That way, I don't have to do anything right now. SY Mach1|FRPP 4:10 gears|Kenny Brown welded subframe connectors|BMR upper/lower Control Arms|PHP intake spacer|MAFIA MAF extender|Procharger P1SC-2|KOOKs Longtubes|KOOKs catted X|Borla STINGER cat-back|Pro 5.0 shifter/MGW handle/MRT Yellow ball|26 spl PMP/T3650|Performance Cobra clutch|Fidanza/Anderson aluminum flywheel|MM quadrant/adjuster |
02-14-2010, 12:29 PM | #8 | |
LuLz
Join Date: Dec 2003
Location: Cedar Park, TX
Posts: 19,294
|
Re: NGK TR6 spark plug question "which one"
Quote:
a P/a setup ive always gapped them at .032...................
__________________
11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away) |
|
02-14-2010, 01:01 PM | #9 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: NGK TR6 spark plug question "which one"
you know we should just make this a sticky since this is basic the plug to use on a p/a or n/a. its a good plug to use and just make it a sticky
|
02-14-2010, 01:53 PM | #10 |
DIY Knuckle Buster
Join Date: Aug 2009
Location: Viera, FL
Posts: 244
|
Re: NGK TR6 spark plug question "which one"
If you gap them a .044 you will have ignition break up. .032 is definitely the best answer for FI.
As for it being the best plug... not sure that is really true. Think about the n/a guys that only want to change their plugs every 100,000 miles... they need to go platinum. More of a stock replacement part. Not everyone out there is like us gearheads that don't mind changing plugs every other oil change
__________________
JB 2003 Mach 1 - Azure/5 Speed 1985 930S - Factory Slope 1983 944 - DE Car 2004 Cayenne - Family Tow Vehicle |
02-14-2010, 02:32 PM | #11 |
the Night Man
Join Date: Dec 2004
Location: Leander, TX
Posts: 984
|
Re: NGK TR6 spark plug question "which one"
It's hell being old. I pulled the old and replaced them with TR6 gapped at .042 the plugs I pulled out were TR6 gapped at .035.
So I guess I need to pull them and regap them before it goes in for the Procharger. I should have come in from the garage and looked at your responses - doH funny thing - I don't remember putting TR6s in. I thought I was still running thr TR55IX.
__________________
I plan ahead. That way, I don't have to do anything right now. SY Mach1|FRPP 4:10 gears|Kenny Brown welded subframe connectors|BMR upper/lower Control Arms|PHP intake spacer|MAFIA MAF extender|Procharger P1SC-2|KOOKs Longtubes|KOOKs catted X|Borla STINGER cat-back|Pro 5.0 shifter/MGW handle/MRT Yellow ball|26 spl PMP/T3650|Performance Cobra clutch|Fidanza/Anderson aluminum flywheel|MM quadrant/adjuster |
02-14-2010, 02:45 PM | #12 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: NGK TR6 spark plug question "which one"
sorry guess your right on that one, most guys that are going to ask bout the plug are more the guys adding stuff to there mach, so that is why i figured that. my bad on not thinking outside the box on that. i still think this should be a sticky that way it is easy to be found and also a question that gets ask a lot
|
01-30-2011, 04:18 PM | #13 |
systemdz
Join Date: Mar 2010
Location: Murray, KY
Posts: 1,131
|
I just went to oreily's and they was telling me their computer called for NGK TR55ix iridiums. My car had Bosch fusions and it has a little miss if I hold it at 2000rpms. The plugs look old so I'm going to change them and hope it fixes my problems. My car is just basic bolt ons and I'm not sure which plug to get??? Any suggestions. Should I just se the autolites or get iridiums?
__________________
2003 Mach 1 Torch Red, 4.6 WAP block .20 coated manley pistons, manley h-beams, 98 cobra cam, BTR springs, Fererra valves, BC auto 4r75w w Freddie Brown MVB w brake, CircleD 4c, built rear and baseline drag suspension. NOS wet kit w NANO. |
01-30-2011, 05:03 PM | #14 |
LuLz
Join Date: Dec 2003
Location: Cedar Park, TX
Posts: 19,294
|
Re: NGK TR6 spark plug question "which one"
tr55ix are fine for you
__________________
11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away) |
04-13-2011, 07:17 AM | #15 |
systemdz
Join Date: Mar 2010
Location: Murray, KY
Posts: 1,131
|
I just went through the same thing. The reason they "won't fit our car's" is because they are a colder heat range than factory. They will fit but if your running n/a you wouldn't need colder.
__________________
2003 Mach 1 Torch Red, 4.6 WAP block .20 coated manley pistons, manley h-beams, 98 cobra cam, BTR springs, Fererra valves, BC auto 4r75w w Freddie Brown MVB w brake, CircleD 4c, built rear and baseline drag suspension. NOS wet kit w NANO. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|