Which badge should I get? - Page 2 - 2003-04 Mach 1 Registry Owners Club

IH8RICE · 10-11-2006, 11:35 AM

Quote:

Originally Posted by birdman941

Badges?..........................

We dont need no stinkin badges

:LAUGH:

GreyMach · 10-11-2006, 12:05 PM

My advice is to not get any at all. I ordered the mach 1 chevron ones and they are very cheap. They are just a piece of like 3mm black plastic with chrome stickers on them which say mach 1 and have the chevron thing. Consider that cuz you'll probley send them back when u get them. I did.

TRMach1 · 10-11-2006, 12:15 PM

My preference.

To be replaced eventually with these.

69fordguru · 10-11-2006, 01:06 PM

Quote:

Originally Posted by SHAKINIT

Holy crap dude, you sure like your Mach 1s, huh?

yes...yes i do...what gave you that impression?? lol

Quote:

Originally Posted by YELLOW_STL_MACH

Do you have a pic? I'd love to see what they look like on a car.

bart03m1 · 10-12-2006, 12:11 AM

Quote:

Originally Posted by ShakinIt

Holy crap dude, you sure like your Mach 1s, huh?

Personally, I like the Pony badge on the '03s, leave it be

same here i think that the pony badge look original. after all the pony pony and the 3 bars are what started all. imo

mach18604 · 10-13-2006, 05:13 PM

the 04 badges are sweet...

Where would be a good place to
put a Hurst badge? Any pics?

Drenath · 10-23-2006, 08:16 PM

There's these too. I think they're a little gay but someone may like them:

machwal · 10-24-2006, 11:36 AM

Here's mine. MRT.
No more do the civics rev next to me.

SIrRicCuS · 11-06-2006, 05:36 PM

Quote:

Originally Posted by machwal

Here's mine. MRT.
No more do the civics rev next to me.

These are definitely the best, in my opinion, thus far! I'd get them!

fiveliter · 11-07-2006, 09:33 PM

Quote:

Originally Posted by YARLY

Those are the s3x. where'd you get them? :THUMBSUP:

Nice job, where'd the holes go. I covered mine with a "high perf" badge below the "Mach 1"

dontmockthemach · 01-18-2007, 01:39 AM

whats the trick to pulling these bad boys out? I have a black mach so a hole wouldnt be very noticible, let alone if I put a piece of black plastic over it...So I am thinking about the trunk badge...sweeet

and btw, we don't need no stinking badges-some guy off of blazing saddles

SIrRicCuS · 01-24-2007, 04:35 PM

Quote:

Originally Posted by IH8RICE

We dont need no stinkin badges

:LAUGH:

Quote:

Originally Posted by dontmockthemach

whats the trick to pulling these bad boys out? I have a black mach so a hole wouldnt be very noticible, let alone if I put a piece of black plastic over it...So I am thinking about the trunk badge...sweeet

and btw, we don't need no stinking badges-some guy off of blazing saddles

I've never even seen that movie...

Aerowrench · 01-28-2007, 03:39 PM

Here's some alternatives from an eBay store. Seller - "Stang Emblems"
http://stores.ebay.com/Stang-Emblems...QQfsubZ7904150

JDLM · 01-28-2007, 04:26 PM

keep the stock

MoCkiN U · 01-28-2007, 05:56 PM

I had the 4.6 ones but kept looking for the ones I saw in a magazine then one day on ebay they popped up. I snatched them up instantly, they come in red and black also. In hind sight I should have gotten black ones

SIrRicCuS · 01-28-2007, 09:44 PM

Quote:

Originally Posted by AREA 51

I had the 4.6 ones but kept looking for the ones I saw in a magazine then one day on ebay they popped up. I snatched them up instantly, they come in red and black also. In hind sight I should have gotten black ones

I think that looks clean! I'm liking the Azure Blue, but Black would have probably looked good too!

:THUMBSUP:

indianajohn · 02-08-2007, 08:35 PM

Get some V-TECH badges

labels2 · 02-08-2007, 10:00 PM

i actually like the stock pony with stripes,
when you see that you think Mustang

MyLittlePony · 02-13-2007, 11:50 AM

Screw the eblems...leave em alone. Buy something to make it faster...
then they will say wtf was that? ....not is is a 6?

MCHNROL · 02-13-2007, 03:00 PM

Mach03InFront · 02-13-2007, 06:50 PM

Quote:

Originally Posted by MyLittlePony

Screw the eblems...leave em alone. Buy something to make it faster...
then they will say wtf was that? ....not is is a 6?

easy 5 hp gain ............

YELLOW_STL_MACH · 02-28-2007, 03:36 PM

Just wanted to post an update.

I was going to just say screw it and leave the ponies on, but I found these pretty cheap and ordered them. (I had seen them all over the place in red or blue, but finally found them in black.)

YELLOW_STL_MACH · 03-05-2007, 07:09 PM

Here's the pics of my new badges.

http://www.putfile.com/yellowstlmach/images/88359

Sublimemach · 03-27-2007, 04:50 PM

Quote:

Originally Posted by YELLOW_STL_MACH

Blue 4.6 High Performance Emblem

i vote these as well

mikeofwarr · 03-27-2007, 05:06 PM

Quote:

Originally Posted by YELLOW_STL_MACH

Just wanted to post an update.

I was going to just say screw it and leave the ponies on, but I found these pretty cheap and ordered them. (I had seen them all over the place in red or blue, but finally found them in black.)

Not bad looking, but I'm keeping the 40th Anniversary badges.

View Poll Results: Which badge should I put on my Zinc Yellow Mach??
281 Running Pony DOHC Mustang Emblems	32	51.61%
4.6 Chevron Emblems	4	6.45%
4.6 Mustang Emblems	10	16.13%
Red 4.6 High Performance Emblem	6	9.68%
Blue 4.6 High Performance Emblem	10	16.13%
Voters: 62. You may not vote on this poll

10-11-2006, 12:05 PM	#27
GreyMach Registered User Join Date: Apr 2005 Posts: 244	Re: Which badge should I get? My advice is to not get any at all. I ordered the mach 1 chevron ones and they are very cheap. They are just a piece of like 3mm black plastic with chrome stickers on them which say mach 1 and have the chevron thing. Consider that cuz you'll probley send them back when u get them. I did. __________________ 2003 Dark Shadow Grey Mach 1. K&N Air Charger, Steeda Tri-Ax, Borla Stingers.D.O.B.-06/10/2003. Brought home-10/13/2003. 1 of 1595 2003 Dark Shadow Gray Mach 1s

10-11-2006, 12:15 PM	#28
TRMach1 Once Bitten-Twice Shy Join Date: Aug 2002 Location: New Castle, Delaware USA Posts: 3,370	Re: Which badge should I get? My preference. To be replaced eventually with these. __________________ Mach1Registry.com Member #7 MCA Member #52787 Nice to meet you, my name's Jim 03 Torch Red Mach 1, 5-speed, IUP *Sold on July 21st 2012!* 2011 Shelby GT500, Ebony Black, Silver Stripes, 6-speed 550hp 510tq Purchased July 23, 2012!

10-13-2006, 05:13 PM	#31
mach18604 Registered User Join Date: Nov 2005 Location: Lyndhurst, Ohio Posts: 2,287	Re: Which badge should I get? the 04 badges are sweet... Where would be a good place to put a Hurst badge? Any pics?

10-23-2006, 08:16 PM	#32
Drenath Registered User Join Date: Feb 2004 Location: Arlington Heights, IL Posts: 641	Re: Which badge should I get? There's these too. I think they're a little gay but someone may like them: __________________ Azure 2003 Mach 1 - 5spd First Eaton swap - 446 rwhp

10-24-2006, 11:36 AM	#33
machwal It's all about the blue Join Date: Jan 2004 Location: Novato, Ca Posts: 355	Re: Which badge should I get? Here's mine. MRT. No more do the civics rev next to me. Attached Thumbnails __________________ Pir super sport 275/40 zr17 (i know, i know) MM K-Member MM Full Length SFC MM Panhard Bar MM Rear LCA H&R Springs Koni D/A's front & rear MM C/C Plates MM Urethane Pinion Snubber Front/Rear spring isolators S/S Steering Shaft MM Alum. Rack Bushings Swaybar end link bushing kit urethane FCA bushings WEB seq t/s IAW hood pins We have no reason to fight, cause we both know that we're right! Shifting and drifting- Mechanical music- Adrenalin surge

01-18-2007, 01:39 AM	#36
dontmockthemach Black Pearl Join Date: Oct 2006 Location: Okinawa, Japan Posts: 765	Re: Which badge should I get? whats the trick to pulling these bad boys out? I have a black mach so a hole wouldnt be very noticible, let alone if I put a piece of black plastic over it...So I am thinking about the trunk badge...sweeet and btw, we don't need no stinking badges-some guy off of blazing saddles __________________ *Procharged Black 03*

01-28-2007, 03:39 PM	#38
Aerowrench Registered User Join Date: Oct 2006 Location: Owasso, OK Posts: 297	Re: Which badge should I get? Here's some alternatives from an eBay store. Seller - "Stang Emblems" http://stores.ebay.com/Stang-Emblems...QQfsubZ7904150 __________________ `03 Torch Red Mach

01-28-2007, 04:26 PM	#39
JDLM Guest Join Date: Mar 2006 Location: Iraq Posts: 1,226	Re: Which badge should I get? keep the stock

01-28-2007, 05:56 PM	#40
MoCkiN U Senior Mach Member Join Date: Feb 2006 Location: Kenosha, WI Posts: 575	Re: Which badge should I get? I had the 4.6 ones but kept looking for the ones I saw in a magazine then one day on ebay they popped up. I snatched them up instantly, they come in red and black also. In hind sight I should have gotten black ones __________________ 03 Azure Blue mach 310 RWHP 332 RWTQ STD DynoTuneMP in Stillman, IL O/R Prochamber Mid Pipe w/ Magnapack Catback FRPP 4.10 Gears JLT RAI MGW Shifter H&R Super Sport Springs w/Tokico Shocks Chrome bullet replica 18X9 & 18X10 Roush front fascia Stalker sides Custom valve cover and engine bay trim Pics: http://smg.photobucket.com/albums/v5...Glow/MACH%201/

02-08-2007, 08:35 PM	#42
indianajohn MAKE HER SCREAM Join Date: Aug 2003 Location: St. Louis Posts: 301	Re: Which badge should I get? Get some V-TECH badges __________________ indiana john 2003 White MACH IUP SLP LM1 Catback Bassani catted x pipe JLT RAI Pro-M 95mm MAF

02-08-2007, 10:00 PM	#43
labels2 Yellow Mustang Registry Join Date: Jun 2004 Location: Rohnert Park, CA Posts: 116	Re: Which badge should I get? i actually like the stock pony with stripes, when you see that you think Mustang __________________ 03 yellow Mach 5 speed IUP, Cervinis Front end and side panels/scoops, Steeda rear wing, 9" Black Bullit Wheels & Toyo tires, 1" Shaker Extension, C & L cai, Borla exhaust, Visus Louvers, FR Tach & SW A-Pillar Gauges, 4pt AutoPower Roll Bar, 3pt Steeda Strut Tower Brace, H & R super sport springs, Tokico 5 way adj shocks, M M lower control arms & cc plates, FR 4:10 gears, Redline hood shocks, FR Aluminum Driveline, Rear Seat Delete

02-13-2007, 11:50 AM	#44
MyLittlePony OG Mach1Misfit Join Date: Apr 2004 Location: Ofallon, MO Posts: 1,543	Re: Which badge should I get? Screw the eblems...leave em alone. Buy something to make it faster... then they will say wtf was that? ....not is is a 6?

02-13-2007, 03:00 PM	#45
MCHNROL original owner Join Date: Mar 2004 Location: Lou-a-vull, KY Posts: 1,556	Re: Which badge should I get?

02-28-2007, 03:36 PM	#47
YELLOW_STL_MACH Registered User Join Date: Jul 2006 Location: St. Louis, MO Posts: 515	Re: Which badge should I get? Just wanted to post an update. I was going to just say screw it and leave the ponies on, but I found these pretty cheap and ordered them. (I had seen them all over the place in red or blue, but finally found them in black.)

03-05-2007, 07:09 PM	#48
YELLOW_STL_MACH Registered User Join Date: Jul 2006 Location: St. Louis, MO Posts: 515	Re: Which badge should I get? Here's the pics of my new badges. http://www.putfile.com/yellowstlmach/images/88359

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)