Coming back - 2003-04 Mach 1 Registry Owners Club

3150Mach1 · 03-17-2018, 11:13 PM

It’s been a while since I have posted. Mach is still sitting with a blown block. Have finally made a move to get her running again. Having a new long block built.

Using my heads with everything upgraded and comp nitrous cams.
Block with be fully forged in an iron block with steel crank. Goal is apx 650HP NA. PLan on spraying it with a 200 shot.

Working on a new auto trans from either PA Automatic or Transmission depot.

Suggestions welcomed.

Goal is 10.5 quarter mile at Ford Fever at MIR in the fall.

Let the good times roll!!!!

falcongtho3 · 03-18-2018, 07:53 AM

Good to see you back up and posting, let us know how the build goes!!!

ab_mach1 · 03-18-2018, 01:02 PM

Looking forward to your updates on the Mach build.

IG: @ab_mach1

HAEG · 03-19-2018, 07:47 AM

Watching for Auto Trans tips.
Good luck

3150Mach1 · 03-19-2018, 09:24 PM

Quote:

Originally Posted by HAEG

Watching for Auto Trans tips.
Good luck

No problem. Have the engine build nailed. Still working on the auto trans.
Sure wish they could build a 6 speed auto with paddle shifters for me. Really don’t like the 3 speed auto w/OD.

03-17-2018, 11:13 PM	#1
3150Mach1 Love my Mach Join Date: Apr 2005 Location: Charlottesville, VA Posts: 13,678	Coming back It’s been a while since I have posted. Mach is still sitting with a blown block. Have finally made a move to get her running again. Having a new long block built. Using my heads with everything upgraded and comp nitrous cams. Block with be fully forged in an iron block with steel crank. Goal is apx 650HP NA. PLan on spraying it with a 200 shot. Working on a new auto trans from either PA Automatic or Transmission depot. Suggestions welcomed. Goal is 10.5 quarter mile at Ford Fever at MIR in the fall. Let the good times roll!!!! __________________ 2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt

03-18-2018, 07:53 AM	#2
falcongtho3 Moderating at Mach 1 Join Date: Aug 2002 Location: Baton Rouge, La. Posts: 16,270	Re: Coming back Good to see you back up and posting, let us know how the build goes!!! __________________ Krewe de la Mach Rouge #340804 13th Mach 1 built 11/07/02 Build Date 12/13/02 Delivery

03-18-2018, 01:02 PM	#3
ab_mach1 Lorraine's driver Join Date: Apr 2012 Location: Indianapolis, IN Posts: 2,442	Looking forward to your updates on the Mach build. IG: @ab_mach1 __________________ Instagram: @azurblumach1 SCT X3 with LaSota Racing tune Borla Stingers w/JBA off road H pipe MGW short shifter w/comfort handle Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates

03-19-2018, 07:47 AM	#4
HAEG Heppasketties Join Date: Aug 2003 Location: Mercer County, NJ Posts: 4,760	Re: Coming back Watching for Auto Trans tips. Good luck __________________ M1R Member #1829 2011 Shelby GT-500 Grabber Blue W/SVT Performance Package Born on Friday, 6-25-2010 Purchased 8-19-2010 2003 Zinc Yellow Auto I/UP (Build #8280 of 9652) Born on Thursday, 7/17/03 Purchased 8-18-2003 first owner Sold 8-19-2010 bought GT500 Purchased again 3-3-2017 fifth owner Purchased for my wife to drive (but she knows I love the car)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)