MSD Digital Window Switch/Nitrous wiring setup - 2003-04 Mach 1 Registry Owners Club

grey03mach1 · 03-11-2007, 05:06 PM

I am trying to install my MSD dig. window switch but the instructions are not specific to our cars. I've mounted it in the glove box but that is all I've accomplished. I believe the white wire goes to the ECU Pin # 26. Black goes to ground, red goes to 12v source, grey is not used, yellow goes to nitrous solenoid? I have a warmer and my NMU ran through 1 relay that is powered by the battery. Can I just add the window switch to that relay? Sorry but MSD's tech support is teh suc! Thanks, Matt

03-11-2007, 05:06 PM	#1
grey03mach1 Speed Addict Join Date: Jan 2005 Location: Jena,Louisiana Posts: 1,393	MSD Digital Window Switch/Nitrous wiring setup I am trying to install my MSD dig. window switch but the instructions are not specific to our cars. I've mounted it in the glove box but that is all I've accomplished. I believe the white wire goes to the ECU Pin # 26. Black goes to ground, red goes to 12v source, grey is not used, yellow goes to nitrous solenoid? I have a warmer and my NMU ran through 1 relay that is powered by the battery. Can I just add the window switch to that relay? Sorry but MSD's tech support is teh suc! Thanks, Matt __________________ My 2003 DSG Mach 1Sold 2001 Formula

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)