2003-04 Mach 1 Registry Owners Club  

Best Mustang Parts

Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 10-16-2009, 11:26 AM   #76
nickster
certified MACH 1 nut
 
nickster's Avatar
 
Join Date: Apr 2004
Location: nova scotia canada
Posts: 1,519
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

my rwhp and tq is in my sig.
__________________
shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq
nickster is offline   Reply With Quote
Old 10-16-2009, 11:44 AM   #77
d18urzr1
Registered User
 
Join Date: Jul 2009
Location: boston,ma
Posts: 37
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Scott McClure View Post
Mine is a weekend only car. Sure it can be driven everyday. I still get low 20's for gas mileage when I dont get in it all the time. I had a Procharger before. Granted I only ran it on 11 lbs. of boost but my Whipple blows it away in every aspect. But I'm sure I'll get flamed for that.
wtf procharger procarger better than whipple....thanks for reminding me i almost missed this post......id still love a swing at you with you using a strick pump gas tune no additives....

we both make the same power cheating using the torco mix and timing advance( unless you changed already from the 700)....pump gas to pump gas woman......any times yet for god sakes?
__________________
d1sc mach1.....700rwhp race gas 632 pump w/12' timing
d18urzr1 is offline   Reply With Quote
Old 10-16-2009, 03:26 PM   #78
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by d18urzr1 View Post
wtf procharger procarger better than whipple....thanks for reminding me i almost missed this post......id still love a swing at you with you using a strick pump gas tune no additives....

we both make the same power cheating using the torco mix and timing advance( unless you changed already from the 700)....pump gas to pump gas woman......any times yet for god sakes?
You quoted my post that's 5 days short of a year there Sherlock. Time slips? Yep. Going to post them up here or any of the major boards and ruin my chances in area events? Not going to happen. Lets try and stay on topic here. You slowcharger, I mean Procharger guys have your own thread going.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 10-16-2009, 03:34 PM   #79
Madmax305
Registered User
 
Madmax305's Avatar
 
Join Date: May 2004
Location: SOUTHERN CALIFORNIA
Posts: 1,081
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

What's up with the procharger guys? Why are they always so defensive and quick to talk smack? Are they feeling inadequate with what they have? They need to keep the smack talk in there own dedicated forums.
__________________
MMR-950 5.0 STROKER
PORT/POLISH-FRPP RACING CAMS
KB 2.1 15LBS 570RWHP 550RWTQ (SAE)
LDC COOLING MOD, DAVIS WP, 8-RIB BELT
TKO 600 .82OD
3.55 GEARS
EATON POSI/31 SPLINE AXLES
COBRA TANK/PUMPS, SCT-2800 MAF, BAP
60LB INJ, FORE FUEL RAILS, -8AN FUEL LINE
BASSANI HEADERS/X-PIPE
CANTON 7QT PAN
MM TUBULAR K-MEMBER/PANHARD BAR
ALUMINUM D.S./FLYWHEEL
BILSTEIN SPORT VALVE COILOVERS
4-PISTON BREMBO CALIPERS/ROTORS
18X9/18X10 CHROME BULLITS/NITTO DR'S
2001 COBRA FRONT COVER
RET Tune
Madmax305 is offline   Reply With Quote
Old 10-16-2009, 03:44 PM   #80
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Madmax305 View Post
What's up with the procharger guys? Why are they always so defensive and quick to talk smack? Are they feeling inadequate with what they have? They need to keep the smack talk in there own dedicated forums.
It's called envy Doyle.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 10-16-2009, 03:46 PM   #81
Madmax305
Registered User
 
Madmax305's Avatar
 
Join Date: May 2004
Location: SOUTHERN CALIFORNIA
Posts: 1,081
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Scott McClure View Post
It's called envy Doyle.
I agree Scott!
__________________
MMR-950 5.0 STROKER
PORT/POLISH-FRPP RACING CAMS
KB 2.1 15LBS 570RWHP 550RWTQ (SAE)
LDC COOLING MOD, DAVIS WP, 8-RIB BELT
TKO 600 .82OD
3.55 GEARS
EATON POSI/31 SPLINE AXLES
COBRA TANK/PUMPS, SCT-2800 MAF, BAP
60LB INJ, FORE FUEL RAILS, -8AN FUEL LINE
BASSANI HEADERS/X-PIPE
CANTON 7QT PAN
MM TUBULAR K-MEMBER/PANHARD BAR
ALUMINUM D.S./FLYWHEEL
BILSTEIN SPORT VALVE COILOVERS
4-PISTON BREMBO CALIPERS/ROTORS
18X9/18X10 CHROME BULLITS/NITTO DR'S
2001 COBRA FRONT COVER
RET Tune
Madmax305 is offline   Reply With Quote
Old 10-16-2009, 06:37 PM   #82
d18urzr1
Registered User
 
Join Date: Jul 2009
Location: boston,ma
Posts: 37
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Madmax305 View Post
I agree Scott!
yes lets all get serious......lol and what do you mean ruin your chances???
__________________
d1sc mach1.....700rwhp race gas 632 pump w/12' timing
d18urzr1 is offline   Reply With Quote
Old 10-18-2009, 03:41 PM   #83
vtecDIS
hunt'n for chevy's
 
vtecDIS's Avatar
 
Join Date: May 2006
Location: Southern CA
Posts: 660
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Scott McClure View Post
You quoted my post that's 5 days short of a year there Sherlock. Time slips? Yep. Going to post them up here or any of the major boards and ruin my chances in area events? Not going to happen. Lets try and stay on topic here. You slowcharger, I mean Procharger guys have your own thread going.
u guys got the numbers, now you should run the 1/4 and settle this
__________________
2003 Torched Mach1, IUP, 5spd
My Mach is for sale.. http://www.mach1registry.org/forums/...d.php?t=108311
2002 Trans Am WS6 M6. Sold but not forgotten
vtecDIS is offline   Reply With Quote
Old 10-19-2009, 10:15 AM   #84
d18urzr1
Registered User
 
Join Date: Jul 2009
Location: boston,ma
Posts: 37
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by vtecDIS View Post
u guys got the numbers, now you should run the 1/4 and settle this
we would have to do it close to an air port so his car doesnt run out of race fuel lol.....plus his mom will kick him out of the house if he gets a speeding ticket lol
__________________
d1sc mach1.....700rwhp race gas 632 pump w/12' timing
d18urzr1 is offline   Reply With Quote
Old 10-19-2009, 03:48 PM   #85
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by d18urzr1 View Post
we would have to do it close to an air port so his car doesnt run out of race fuel lol.....plus his mom will kick him out of the house if he gets a speeding ticket lol
No race gas here. Just 93 octane plus Torco. A race gas tune would have put me in the high 700's.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 11-03-2009, 05:18 PM   #86
Mister L
Don't squeeze the Charmin
 
Mister L's Avatar
 
Join Date: Sep 2003
Location: OKC, OK
Posts: 1,034
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

UPDATE for Mister L: New motor, +.020, 9:1 Mahle, Comp Stage 3 blower grind, Whipple 2.3 with 3.0 upper, stock lower (13 psi) (17deg timing) ported heads, ARP Main and Head studs, balanced, Stock fuel rails, 60 pound injectors, stock 57mm throttle body, Kenne Belle Cold Air Kit, Stock 90mm w/MAFia, 1-5/8 JBA Midlengths, off-road ProChamber, Magnaflow, KB Boost a pump, Stock waterpump, dual core intercooler and a stock thermostat. Results: 617RWHP, 580 RWTQ on 93 pump gas. This with 410 gears. I'm happy!
__________________
Mister L
03 Black 6-speed

Last edited by Mister L; 01-28-2010 at 08:31 AM.
Mister L is offline   Reply With Quote
Old 11-03-2009, 05:31 PM   #87
wesking1
Registered User
 
wesking1's Avatar
 
Join Date: Oct 2008
Location: anderson, sc
Posts: 171
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Mister L View Post
UPDATE for Mister L: New motor, +.020, 9:1 Mahle, Comp Stage 3 blower grind, Whipple 2.3 with 3.0 upper, stock lower (13 psi) (17deg timing) ported heads, ARP Main and Head studs, balanced, Stock fuel rails, 60 pound injectors, stock 57mm throttle body, Kenne Belle Cold Air Kit, Stock 90mm meter w/MAFia, 1-5/8 JBA Midlengths, off-road ProChamber, Magnaflow, KB Boost a pump, Stock waterpump, dual core intercooler and a stock thermostat. Results: 617RWHP, 580 RWTQ on 93 pump gas. This with 410 gears. I'm happy!
Very nice
__________________
04 cobra
wesking1 is offline   Reply With Quote
Old 11-03-2009, 06:27 PM   #88
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Mister L View Post
UPDATE for Mister L: New motor, +.020, 9:1 Mahle, Comp Stage 3 blower grind, Whipple 2.3 with 3.0 upper, stock lower (13 psi) (17deg timing) ported heads, ARP Main and Head studs, balanced, Stock fuel rails, 60 pound injectors, stock 57mm throttle body, Kenne Belle Cold Air Kit, Stock 90mm meter w/MAFia, 1-5/8 JBA Midlengths, off-road ProChamber, Magnaflow, KB Boost a pump, Stock waterpump, dual core intercooler and a stock thermostat. Results: 617RWHP, 580 RWTQ on 93 pump gas. This with 410 gears. I'm happy!
Marty, spin that puppy would you?

Glad your happy.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 11-03-2009, 10:00 PM   #89
lxh89
Registered User
 
lxh89's Avatar
 
Join Date: Jan 2003
Location: Houston, Tx
Posts: 1,530
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Mister L View Post
UPDATE for Mister L: New motor, +.020, 9:1 Mahle, Comp Stage 3 blower grind, Whipple 2.3 with 3.0 upper, stock lower (13 psi) (17deg timing) ported heads, ARP Main and Head studs, balanced, Stock fuel rails, 60 pound injectors, stock 57mm throttle body, Kenne Belle Cold Air Kit, Stock 90mm meter w/MAFia, 1-5/8 JBA Midlengths, off-road ProChamber, Magnaflow, KB Boost a pump, Stock waterpump, dual core intercooler and a stock thermostat. Results: 617RWHP, 580 RWTQ on 93 pump gas. This with 410 gears. I'm happy!
9:1 compression, 3" upper and only 13psi of boost?

Tony
__________________
2015 Ruby Red Mustang GT Premium
Bone Stock

03 Oxford White Mach 1 - SOLD
1.72 60',10.932@131.60MPH, 3800# Raceweight
lxh89 is offline   Reply With Quote
Old 11-04-2009, 06:23 AM   #90
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

That's what I was thinking Tony. Marty any belt slip?
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 11-04-2009, 10:10 AM   #91
Mister L
Don't squeeze the Charmin
 
Mister L's Avatar
 
Join Date: Sep 2003
Location: OKC, OK
Posts: 1,034
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

I did initially have belt slip (around 5800 rpm) and tried to find a better fitting belt, but I couldn't find one for a 3.5 upper so I changed to a 3.0 and a different belt that worked. With the 3.0 it increased my HP about 70 but the torque came up a hundred. I know I can run more boost but it has enough for me (at the moment) and I want some longevity out of this motor. With a 91 octane tune it still put down 600/575 with 15deg.

Dyno day sucked. Moved car from OKC via trailer to Dallas a few days prior. Dyno day had rain and I find out my wipers are inop and I'm driving in Dallas where I haven't a clue where I'm going and trying to follow someone to get me there. Car won't hardly run (WTF?) I'm having to work the clutch, throttle, hand brake and keep the RPMs about 1500 at a gazillion enroute stop signs! No cash on me so I can't take the tollway and my stress is peaked. Get on the dyno and my Xcal2 takes a dump. Buy a 3, start the car and the MAFia is broke, (no MAF signal and I get another one)..........lets just say the day was long and 'spensive! Sorry for the long post but that was one heck of a day. I drove the car back to OKC with a smile and I like the Comp cams.
__________________
Mister L
03 Black 6-speed
Mister L is offline   Reply With Quote
Old 11-04-2009, 10:12 AM   #92
Mister L
Don't squeeze the Charmin
 
Mister L's Avatar
 
Join Date: Sep 2003
Location: OKC, OK
Posts: 1,034
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by lxh89 View Post
9:1 compression, 3" upper and only 13psi of boost?

Tony
Is that odd? Should it be higher? With a 3.5 upper and stock lower I was only showing 9psi on my Boost gage. With the 3.0 it shows 13.....maybe I'm missing something............perhaps the loss is stage 3 cams or are you saying "Dude, WTF, Spin that MOFO! ?
__________________
Mister L
03 Black 6-speed
Mister L is offline   Reply With Quote
Old 11-04-2009, 10:58 AM   #93
lxh89
Registered User
 
lxh89's Avatar
 
Join Date: Jan 2003
Location: Houston, Tx
Posts: 1,530
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Mister L View Post
Is that odd? Should it be higher? With a 3.5 upper and stock lower I was only showing 9psi on my Boost gage. With the 3.0 it shows 13.....maybe I'm missing something............perhaps the loss is stage 3 cams or are you saying "Dude, WTF, Spin that MOFO! ?
Your boost gauge is wrong then...Is an electronic gauge or mechanical? You should find a mechanical and verify.. I dont trust the electronic ones at all.

With a stock lower, 3" upper, 9:1 compression, you should be seeing 17-18 psi of boost. The fact you are running 17 degrees of timing implies 18 psi as thats a safe timing for that boost level.

Tony
__________________
2015 Ruby Red Mustang GT Premium
Bone Stock

03 Oxford White Mach 1 - SOLD
1.72 60',10.932@131.60MPH, 3800# Raceweight
lxh89 is offline   Reply With Quote
Old 11-04-2009, 11:24 AM   #94
Mister L
Don't squeeze the Charmin
 
Mister L's Avatar
 
Join Date: Sep 2003
Location: OKC, OK
Posts: 1,034
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Its electric....I should put a mechanical on it and see what it reads. Thanks Tony!
__________________
Mister L
03 Black 6-speed
Mister L is offline   Reply With Quote
Old 11-04-2009, 04:17 PM   #95
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

As Tony stated get a mechanical boost gauge on there and see where your at. Another thing is when you up the compression your boost also goes up. Marty I can't remember but are you running the 03-04 Cobra belt setup or did you just piece together your own 8-rib setup? Sounds like you had a horrible ride to the dyno that day. I've removed my wipers and got caught once on a day it wasn't supposed to rain and had a nice 45 minute ride home in a torrential downpour.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 11-05-2009, 10:15 AM   #96
Mister L
Don't squeeze the Charmin
 
Mister L's Avatar
 
Join Date: Sep 2003
Location: OKC, OK
Posts: 1,034
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

I'm using the Billet Flow 90 and 100mm pulleys throughout and added the one that mounts near the top to get almost a full wrap on the blower pulley. I do still have the 03-4 Cobra lower braced pulley. I'm sure my wipers is a wiring or relay issue. The fuses check ok but then I normally won't drive in the rain so its not a big deal. I just like my stuff to work when you activate a switch!

I'll check into a mechanical boost gage and see what it displays.
__________________
Mister L
03 Black 6-speed
Mister L is offline   Reply With Quote
Old 11-30-2009, 07:56 PM   #97
32VALVR
Registered Mach Abuser
 
32VALVR's Avatar
 
Join Date: Apr 2006
Location: SoCal
Posts: 1,668
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

I've had my K/B for about 2k miles now and now that its cooler out I was hoping the fan wouldn't run on high so much. Anyone have any success with a larger aftermarket radiator? Or if you've found another solution all input would be greatly appreciated.
__________________
2002 true Blue GT with all the mods listed below except the auto trans.

Dave
03 O/W
Kenne Bell 2.1, Stock block, Built 4R70W, Fairbanks, Accufab, Slp, 3.73, Moser, Welded tubes, Trick Flow, Magnapack, Megabite Jrs, AFS.
1/4 11.57@119.63 1/8th 7.4@95 on NTO5r DRs
Wrecked 9/16/17
32VALVR is offline   Reply With Quote
Old 11-30-2009, 08:23 PM   #98
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

I run the Mishimoto radiator and my car never goes above 180-185 but honestly your stock one should be sufficient. As far as the fan you can have it come on at different times or different speeds via a tune. Did you get a custom tune or are you using the chip from KB?
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 11-30-2009, 08:35 PM   #99
Linumup
Registered User
 
Linumup's Avatar
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Madmax305 View Post
What's up with the procharger guys? Why are they always so defensive and quick to talk smack? Are they feeling inadequate with what they have? They need to keep the smack talk in there own dedicated forums.

I never feel inadequate ! Or do i need to Smack Talk !

Just interested in seeing what the competition is up too ! Everytime you turn around there is an upgrade on the market .
__________________
1331 RWHP 1296 RWTQ 28 PSI
5.3 liter 322.4 cu.in. Big Bore Stroker
HP PNP Heads w/5 Angle Valve Job
HP Custom Cams
ATI Racing TH400 Cheetah SCS Air Assisted Shifter
Strange 31 spline axles w/3:55
F1R Procharger w/Cog Set-up
Magnafuel 750 -10AN Feed -8AN Return
200 Direct Wet w/MSD window switch & controller
Big Stuff 3 w/Gen. 3 Pro EFI system
Kooks 1.78 LTS 3" Custom Exhaust
Tuning by DGR Racing



DYNO KING
Linumup is offline   Reply With Quote
Old 11-30-2009, 08:43 PM   #100
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Linumup View Post
I never feel inadequate ! Or do i need to Smack Talk !

Just interested in seeing what the competition is up too ! Everytime you turn around there is an upgrade on the market .
Hey Procharger boy please stay out of the "REAL" power adder forum!
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:21 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<