|
11-11-2017, 01:05 PM | #1 |
SVT
Join Date: Jun 2010
Location: Northern California
Posts: 812
|
Sullivan intake..
20171111_094411 by Kevin Vincent, on Flickr
20171111_094351 by Kevin Vincent, on Flickr 20171111_094401 by Kevin Vincent, on Flickr Excuse my dirty engine bay as im right in the middle of installing the sullivan and changing up some things.. Cant wait to see what it does for my setup. At this point im pretty sure i will meet my head restrictions but im gonna see how far they will get me. Not going to lie, this is the first time ive ever dealt with a manifold like this on a 4v so some things are new to me. Not bad though! I have to extend my IAC wiring, and Maf harness as well. I had to space the upper lid 1.25" up as recommended by Sullivan to clear my Alternator because i left it in the stock location. Im trying to decide how i might my throttle cable and bracket setup. The funniest part is my JLT CAI will work perfect with a 90 degree coupler on it lol Just going to relocate my temp sensor finally lol (lazy approach). Also clean up all the yucky wiring now since its really all exposed now. Any other 4v NA guys running a sullivan?
__________________
2001 Zinc yellow SVT Cobra Forged 11.5CR 284ci Comp 106500 cams - Degreed 01 cobra Heads - tastefully modded Roys ported/polished Intake Kooks longtubes, Magnaflow catback D&D T3650, Mgw shifted FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS 04 cobra interior , black termy seats, Speedhut gauges Tubular K, MM coilovers/ Koni SA yellows Starkweather tuned, 24* timing on 91 octane 11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs Next up:Sullivan intake and hat, self tuning.. |
11-17-2017, 07:32 AM | #2 |
Registered User
Join Date: Jun 2004
Location: beaumont texas
Posts: 1,344
|
Re: Sullivan intake..
I don't have one but that is a sweet setup.
__________________
2004white mach1 2001 svt lightning 2011 Mitsubishi Evo X 1999 F250 7.3L |
11-18-2017, 11:29 AM | #3 |
Registered User
Join Date: Feb 2015
Location: Bessemer City, NC
Posts: 59
|
Re: Sullivan intake..
What are you using for the lower intake? Just a 4V 4bbl intake?
|
11-19-2017, 10:10 AM | #4 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Sullivan intake..
sweet...always loved that intake but going to have to spin the crap out of the motor to get the full benny's of that intake in NA form.
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
11-19-2017, 12:48 PM | #5 |
SVT
Join Date: Jun 2010
Location: Northern California
Posts: 812
|
Re: Sullivan intake..
Sullivan lower efi manifold
Thanks, thats the plan. The previous ported mani was sick but wasnt enough for me.
__________________
2001 Zinc yellow SVT Cobra Forged 11.5CR 284ci Comp 106500 cams - Degreed 01 cobra Heads - tastefully modded Roys ported/polished Intake Kooks longtubes, Magnaflow catback D&D T3650, Mgw shifted FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS 04 cobra interior , black termy seats, Speedhut gauges Tubular K, MM coilovers/ Koni SA yellows Starkweather tuned, 24* timing on 91 octane 11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs Next up:Sullivan intake and hat, self tuning.. |
01-14-2018, 04:55 PM | #6 |
Registered User
Join Date: May 2016
Location: Houston, TX
Posts: 16
|
Re: Sullivan intake..
I'm curious, have you finished installing everything for the Sullivan intake yet?
If so, what do you think of it compared to the old ported manifold? Have you gotten any dyno numbers from it? Is there much noticeable loss in the low-mid range power/response? |
01-24-2018, 07:37 PM | #7 |
Registered User
Join Date: Jun 2007
Location: Las Vegas
Posts: 1,086
|
Re: Sullivan intake..
Did you do a cam change as well?
I run a ported sully on mine with an HPP upper. Ported short runner combo made 473hp with peak hp at 6800. The sulley combo makes right at 500 with larger cams with pk hp at 7800. It lost about 25lb/ft of tq. I like the sully combo better at the track but not as fun on the street. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|