|
02-24-2009, 09:48 PM | #1 |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Cruise control not working.
I checked all fuses, any ideas what may be wrong. How does the cruise control system work? Then I might be able to trace the issue. BTW I have stock throttle body. Only mods that may affect are are clutch quadrant and firewall adjuster. I thought maybe the pedal wasnt springing back enough causing the car to not go into cruise.
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
02-24-2009, 10:29 PM | #2 |
Torque wins!
Join Date: Dec 2004
Location: Florida
Posts: 13,167
|
Re: Cruise control not working.
Could be:
Cruise button on steering wheel (or connection) Clockspring (horn work? Airbag light on?) Module or connection (LF footwell behind splash shield) Cable busted or disengaged from module Cable off of TB or pulling through bracket
__________________
The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno |
02-24-2009, 11:25 PM | #3 |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Re: Cruise control not working.
Pretty sure horn still works. Airbag light is off. How would I go about checking the other things?
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
02-25-2009, 12:57 AM | #4 |
Registered User
Join Date: Feb 2006
Location: Fairfield, CA
Posts: 510
|
Re: Cruise control not working.
well if your horn works and no airbag light then clockspring is ok, id check under the hood at the tb and make sure the cable didnt come off and also check to make sure that the plugs in the CC module in the driver footwell behind splash shield are connected... if all thats ok then it might be time to go into the dealership...
__________________
2003 Azure Blue Mach 1 w/ IUP http://www.youtube.com/watch?v=0_zD6QnuMPE Joined the 12 Second Club on 5-15-08! JLT RAI, PHP Spacer Magnaflow Catback, SLP X-Pipe MGW Shifter, Centerforce Dual Friction, Fidanza Flywheel, Fiores Quadrant and Adjuster Nitto 315/35/17 DR's, 10th Ann. Cobra Wheels FRPP 4.10's, Strange 31 Spline Axles, Auburn ECTED Carrier SCT XCal2, Dyno Tune from AED. 302whp,326wtq Mods Coming Soon: Thinking about an Eaton Swap... |
02-25-2009, 01:08 AM | #5 | |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Re: Cruise control not working.
Quote:
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
|
02-25-2009, 10:31 AM | #6 |
Come back yellar
Join Date: Oct 2007
Location: Bartlesville, OK
Posts: 202
|
Re: Cruise control not working.
what about the deactivation switch?...
__________________
Yellows my color. |
02-25-2009, 12:08 PM | #7 |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Re: Cruise control not working.
Is it possible to get a skematic of the cruise control system? Originally I started having issues when the firewall adjuster was not adjusted properly due to me having pulled the clutch cable too much making it too tight at the tranny and too much slack at the firewall adjuster. I would have to put my foot under the clutch pedal and pull up on it to make the cruise work. Now I fixed the cable everthings good there, the cruise just wont work. I figure that may have something to do with it so if I can see a diagram then I may be able to better trace it.
In worst case I have to buy a new servo correct? And thats about 60?
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
02-25-2009, 01:30 PM | #8 |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Re: Cruise control not working.
How do I find the CPP switch? (clutch pedal position switch)
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
02-25-2009, 01:34 PM | #9 |
Torque wins!
Join Date: Dec 2004
Location: Florida
Posts: 13,167
|
Re: Cruise control not working.
Follow the clutch pedal up under the dash.
__________________
The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno |
02-26-2009, 03:27 PM | #10 |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Re: Cruise control not working.
How can I trouble shoot the different things? CPP, Servo, etc??
Thanks, John
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
02-28-2009, 10:29 AM | #11 |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Re: Cruise control not working.
Bump, anyone know how to trouble shoot??
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
02-28-2009, 06:17 PM | #12 |
Registered User
Join Date: Mar 2007
Location: MD.
Posts: 112
|
Re: Cruise control not working.
If U had a White Mach Im sure U wouldnt have this problem.
|
03-01-2009, 07:39 PM | #13 |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Re: Cruise control not working.
Yeah, Id have bigger issues like how to get the harley davidson out of my door.
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
03-01-2009, 08:33 PM | #14 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: Cruise control not working.
See if this helps you.
Sorry that I did not get the first couple of pages in order
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... |
03-01-2009, 08:36 PM | #15 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: Cruise control not working.
I dont know why, but they do not post in the order I save them.
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... |
03-01-2009, 08:38 PM | #16 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: Cruise control not working.
Last batch
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... |
03-01-2009, 09:16 PM | #17 | |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Re: Cruise control not working.
Quote:
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
|
03-02-2009, 04:46 PM | #18 |
Registered User
Join Date: Mar 2007
Location: MD.
Posts: 112
|
Re: Cruise control not working.
Hey JJ (Apollo240) , ur cruise Conttrol dosent work cause i Pissed all over ur Electronics. hahah
|
03-02-2009, 05:38 PM | #19 |
12's
Join Date: Oct 2006
Location: In front of SparksMach1, MD
Posts: 1,655
|
Re: Cruise control not working.
Great come back Nick....
__________________
Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|