|
04-29-2009, 02:18 PM | #1 |
Registered User
Join Date: Apr 2008
Location: Wyoming
Posts: 167
|
gear install help
I recently bought some ford racing 4.30 gears and install kit. I just called the shop to see if they would install them and they said i didnt get enough stuff?? they said they have to replace a bunch of bearings and spider gears and other crap is that true or are they blowing smoke???? this is the install kit i ordered
http://www.stangsuspension.com/store...?idproduct=413
__________________
Never buying another Mitsubishi! |
04-29-2009, 02:49 PM | #2 |
Registered User
Join Date: May 2007
Location: Washington
Posts: 67
|
Re: gear install help
You at the very least need pinion bearings, the rest is up to inspection & condition of the used parts. Some shops replace all bearings if the vehicle has many miles on it. It's not a bad practice to do so, dont know about the spider gears though, i would only replace them if damaged or really worn.
|
04-29-2009, 02:54 PM | #3 |
Registered User
Join Date: May 2007
Location: FS, TX
Posts: 796
|
Re: gear install help
this is the kit i ordered and did my install with.... we didnt need nothing else besides the gears of course.
http://www.americanmuscle.com/moinkit8re.html its cheap at 35 Bucks. and comes with more stuff than the kit you ordered. now if your car has like 90+K miles id recommend this kit which replaces everything. http://www.americanmuscle.com/rearendrebuild.html
__________________
2003 Mustang Mach 1 (Bought 11/16/2005) Eaton Swapped @7psi (On 10/24/15) 13.2@107 (Bone Stock Run) 2000 3.8 Mustang
Sold But Will Never Be Forgotten |
04-29-2009, 02:56 PM | #4 |
Registered User
Join Date: Oct 2007
Location: Pikeville, KY
Posts: 524
|
Re: gear install help
Agree 100% with the above.
__________________
2003 Black 5 Speed 3.73's PRO 50 Shifter, Aluminum Driveshaft 2003 Ox White Cobra 3.2 Pulley Pro 50 Shifter Sticky Nittos What else do ya need :ORANGE: |
04-29-2009, 05:38 PM | #5 |
Registered User
Join Date: Apr 2008
Location: Wyoming
Posts: 167
|
Re: gear install help
I dont see anything diff in the kit you posted besides the brush????
__________________
Never buying another Mitsubishi! |
04-29-2009, 07:44 PM | #6 |
Registered User
Join Date: May 2007
Location: FS, TX
Posts: 796
|
Re: gear install help
lol i didnt really look at yours that good, but you should be able to do it with just the kit you got.
__________________
2003 Mustang Mach 1 (Bought 11/16/2005) Eaton Swapped @7psi (On 10/24/15) 13.2@107 (Bone Stock Run) 2000 3.8 Mustang
Sold But Will Never Be Forgotten |
04-29-2009, 08:34 PM | #7 |
Registered User
Join Date: Nov 2007
Location: Dublin, Georgia
Posts: 259
|
Re: gear install help
How many miles are on your car? You shouldn't have to replace the spider gears unless they are really worn (ALOT of miles). I just rebuilt the rearend in my mach with 73K miles and the spider gears looked great. But it didn't really matter since I replaced the Trak-lok with and Eaton.
Eric
__________________
Eric 2003 Black 03 Mach 1 T56-swap, built rearend, full bolt ons. 321/342 .... next up: ported heads, GT cams, build bottom end, fuel system, then D1SC. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|