For sale: Maximum motorsports front coil overs w/ stock struts - 2003-04 Mach 1 Registry Owners Club

Bmeagher · 01-27-2014, 08:15 PM

SOLD

12" 250lbs springs, with stock struts. 40,000 miles on shocks, 3000 miles on coil overs.
Also selling MMCC9994 caster/camber plates.
Best offer.
Text 867-444-9847

Want to sell all together.
Nothing wrong with any parts. Just upgrading to bilstein's/03-04 cobra cc plates & coil overs front and rear.

Bmeagher · 02-01-2014, 08:45 PM

TTT....text for pictures. All ready to ship

wldtang · 02-02-2014, 12:15 PM

What struts do the coil overs fit? Tokico?

Bmeagher · 02-02-2014, 05:45 PM

Coil-over conversion fits Koni, Tokico, Strange and Lakewood front struts. Allows easy adjustment of ride height. Improves handling and ride quality by deleting the stock-location front springs in favor of springs mounted on the struts.

The quality of Maximum motorsports parts is awesome

wldtang · 02-02-2014, 07:17 PM

How much for just the coil overs with springs?

Do the rattle like other coil overs?

Bmeagher · 02-02-2014, 07:50 PM

They don't rattle at all. I will separate if I can sell both at the same time....ideally I'd like to sell everything together.

wldtang · 02-02-2014, 08:01 PM

Ok let me know would be including the struts.

What rear springs did u use with these?

Just curious what the price

Bmeagher · 02-02-2014, 08:24 PM

Struts/coilovers/cc plates.... I'm running my stock rear springs
Make me an offer

thebestdj07 · 02-06-2014, 09:41 PM

how much are you looking to get out of these?

Bmeagher · 02-07-2014, 10:09 AM

425 shipped

Bmeagher · 02-08-2014, 04:14 PM

sold

03AZRE BLU · 03-03-2014, 11:43 AM

What springs did you use and do you have to have maximum motorsports cc plates. And I know it's sold I'm just trying to figure out whether or not coil overs are worth it and if so which ones to go with.

Bmeagher · 03-03-2014, 07:09 PM

If your doing coilovers, and going to adjust your ride height.... I'd suggest the camber/caster plates to adjust the alignment. The 12" 250lbs, ride like a stock spring.
I basically ran that setup to adjust the ride height down.
I ordered mm-2 Bilstein's, MM race series, with coilovers front and rear.

03AZRE BLU · 03-06-2014, 11:41 AM

Ok. Well I have caster camber plates but not sure of brand as they were installed when I bought the car. I was looking at the UPR coil overs but I've heard the maximum motorsports were better but not sure if they are worth the extra 150 bucks to get the set for my tokico struts. And thanks for the help

01-27-2014, 08:15 PM	#1
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	For sale: Maximum motorsports front coil overs w/ stock struts SOLD 12" 250lbs springs, with stock struts. 40,000 miles on shocks, 3000 miles on coil overs. Also selling MMCC9994 caster/camber plates. Best offer. Text 867-444-9847 Want to sell all together. Nothing wrong with any parts. Just upgrading to bilstein's/03-04 cobra cc plates & coil overs front and rear. __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE Last edited by Bmeagher; 02-08-2014 at 04:14 PM.

02-01-2014, 08:45 PM	#2
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	Re: For sale: Maximum motorsports front coil overs w/ stock struts TTT....text for pictures. All ready to ship __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE Last edited by Bmeagher; 02-02-2014 at 06:25 PM.

02-02-2014, 12:15 PM	#3
wldtang Registered User Join Date: Dec 2008 Location: evansville indiana Posts: 389	Re: For sale: Maximum motorsports front coil overs w/ stock struts What struts do the coil overs fit? Tokico? __________________ 2004 DSG Mach 1 - 11.79 1/4 (7.48 1/8) 1994 Cobra (terminator swap) -10.44 1/4

02-02-2014, 05:45 PM	#4
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	Re: For sale: Maximum motorsports front coil overs w/ stock struts Coil-over conversion fits Koni, Tokico, Strange and Lakewood front struts. Allows easy adjustment of ride height. Improves handling and ride quality by deleting the stock-location front springs in favor of springs mounted on the struts. The quality of Maximum motorsports parts is awesome __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE

02-02-2014, 07:17 PM	#5
wldtang Registered User Join Date: Dec 2008 Location: evansville indiana Posts: 389	Re: For sale: Maximum motorsports front coil overs w/ stock struts How much for just the coil overs with springs? Do the rattle like other coil overs? __________________ 2004 DSG Mach 1 - 11.79 1/4 (7.48 1/8) 1994 Cobra (terminator swap) -10.44 1/4

02-02-2014, 07:50 PM	#6
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	Re: For sale: Maximum motorsports front coil overs w/ stock struts They don't rattle at all. I will separate if I can sell both at the same time....ideally I'd like to sell everything together. __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE

02-02-2014, 08:01 PM	#7
wldtang Registered User Join Date: Dec 2008 Location: evansville indiana Posts: 389	Re: For sale: Maximum motorsports front coil overs w/ stock struts Ok let me know would be including the struts. What rear springs did u use with these? Just curious what the price __________________ 2004 DSG Mach 1 - 11.79 1/4 (7.48 1/8) 1994 Cobra (terminator swap) -10.44 1/4

02-02-2014, 08:24 PM	#8
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	Re: For sale: Maximum motorsports front coil overs w/ stock struts Struts/coilovers/cc plates.... I'm running my stock rear springs Make me an offer __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE

02-06-2014, 09:41 PM	#9
thebestdj07 Registered User Join Date: Mar 2010 Location: Toledo, Ohio Posts: 33	Re: For sale: Maximum motorsports front coil overs w/ stock struts how much are you looking to get out of these?

02-07-2014, 10:09 AM	#10
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	Re: For sale: Maximum motorsports front coil overs w/ stock struts 425 shipped __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE

02-08-2014, 04:14 PM	#11
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	Re: For sale: Maximum motorsports front coil overs w/ stock struts sold __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE

03-03-2014, 11:43 AM	#12
03AZRE BLU Registered User Join Date: Aug 2010 Location: NC Posts: 158	Re: For sale: Maximum motorsports front coil overs w/ stock struts What springs did you use and do you have to have maximum motorsports cc plates. And I know it's sold I'm just trying to figure out whether or not coil overs are worth it and if so which ones to go with.

03-03-2014, 07:09 PM	#13
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	Re: For sale: Maximum motorsports front coil overs w/ stock struts If your doing coilovers, and going to adjust your ride height.... I'd suggest the camber/caster plates to adjust the alignment. The 12" 250lbs, ride like a stock spring. I basically ran that setup to adjust the ride height down. I ordered mm-2 Bilstein's, MM race series, with coilovers front and rear. __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE

03-06-2014, 11:41 AM	#14
03AZRE BLU Registered User Join Date: Aug 2010 Location: NC Posts: 158	Re: For sale: Maximum motorsports front coil overs w/ stock struts Ok. Well I have caster camber plates but not sure of brand as they were installed when I bought the car. I was looking at the UPR coil overs but I've heard the maximum motorsports were better but not sure if they are worth the extra 150 bucks to get the set for my tokico struts. And thanks for the help

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)