|
06-23-2014, 05:23 PM | #1 |
Registered User
Join Date: Jul 2010
Location: Michigan
Posts: 876
|
who's running 15x8 wheels out and/or 28" tire
If you have pictures great, if not no biggie.
Does the 15x8 race star fit well? How much grinding if any? Also how bad is it to fit say a 275/60R15? Just gotta roll fender lips or what? And what are most guys running up front the 26" skinny? |
06-23-2014, 05:39 PM | #2 |
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Re: who's running 15x8 wheels out and/or 28" tire
I ran a 15x8 weld rim with a 28x10.5. I didn't have to do anything with stock springs and ISOs to clear. It was tight though.
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
06-23-2014, 06:06 PM | #3 |
Registered User
Join Date: Feb 2013
Location: NEW YORK HIGHEST TAXES IN AMERICA
Posts: 603
|
Re: who's running 15x8 wheels out and/or 28" tire
I run 15x10 pro stars 6.5 BS & I've had 28x11.5 ET street (bias ply) with no issues. Currently running ET 275/50/15 MT radials. No rolling fender lip but 7" BS would be better IMO. Up front I run 3.5" with 165/15 generic junk that measure about 26".
|
06-23-2014, 06:19 PM | #4 |
Registered User
Join Date: Jul 2010
Location: Michigan
Posts: 876
|
Re: who's running 15x8 wheels out and/or 28" tire
|
06-24-2014, 10:46 AM | #5 |
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Re: who's running 15x8 wheels out and/or 28" tire
Oh ya. Plenty of grinding on the banjo bolt.
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
06-24-2014, 01:54 PM | #6 |
Registered User
Join Date: Jul 2010
Location: Michigan
Posts: 876
|
Re: who's running 15x8 wheels out and/or 28" tire
|
06-24-2014, 02:33 PM | #7 |
Registered User
Join Date: Jun 2008
Location: MI
Posts: 358
|
Re: who's running 15x8 wheels out and/or 28" tire
The race star 15x8 5.5bs should fit without grinding. I test fitter the 15x10 and would have only required a bit of grinding. Wish I would have went that way instead of doing to the gt brakes to get the welds to fit without grinding. Hell I still have to run a small spacer in the front. If it was me go race star 15x8 and the 17" front. Should fit with no modifications.
__________________
2004 Mach 1 Vortech V2-SQ, Powerpipe, BBK LT's, catted X-pipe, 4.10's, Roy's 7/8 spacer. 470 rwhp 410 rwtq On a mustang dyno |
06-24-2014, 02:47 PM | #8 |
Registered User
Join Date: Jul 2010
Location: Michigan
Posts: 876
|
Re: who's running 15x8 wheels out and/or 28" tire
I emailed then was told 8 and 10 will fit but I'm going to go with 8s I think to play it safe. Welds would be cool but my front race stars are actually very nice
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|