|
|
Photo Gallery | $ Donations $ | Register | FAQ | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
03-05-2018, 09:17 PM | #1 |
Guest
Join Date: May 2016
Location: Gettysburg, PA
Posts: 51
|
Coil cover gaskets/grommets.
Replaced coil cover gaskets today after reading about water infiltration, but the originals were in fine shape. The bigger issue I think is making sure that the coil wiring lead grommets in the valve covers are fitted right; they are formed to fit the opening. Replaced plugs last year and found them out of place with water spots in several coil/plug sockets at the firewall. Removing coils can get the grommets out of place pretty easily.
|
03-06-2018, 10:01 AM | #2 |
Registered User
Join Date: Aug 2004
Location: Winston-Salem,NC
Posts: 1,802
|
Re: Coil cover gaskets/grommets.
What I learned a long time ago is to put a dab of RTV on the grommet and a little on either side before you put the coil cover on.
__________________
2003 Azure mach1 5 speed with IUP Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there 2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s HPDE Instructor |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|