|
|
Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here! |
|
Thread Tools | Display Modes |
02-12-2013, 11:18 PM | #1 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Mach 1 Parts and Performance Parts
Well I traded my 03 Mach 1 in. I am now selling a alot of parts I will try to post pictures, But the best way will be to shoot me an e-mail. I will start the list and add as I go thru everythng. Now The list will be long.
1. Teksid block .20 over with a livernois stroker kit. Will get the paperwork out and post . 4500.00. build was done by baytown machine. Stroker kit from Livernois motorsports. Bought new. This is a high end kit. Kellog race crank. Manley rods, Manle pistons. ARP bolts upper and lower. Severe duty pistons/ flat top piston 11.1 comp. using 4valve heads. 2. Bullit racing custom nitrous cams Specs to come. Paid 1600. Sell for 900.00 3. Moshimoto Alum Radiator Manual trans. Paid 315.00. sell for 250.00 4. 5. Chrome valve covers (DOHC). paid 550.00 Sell for 425.00 6. Custom polished alum coil cover with Mach1 engraved in top. sell for 250.00 7. Granatelli K-member kit with coil over kit. Brand new never installed paid 750.00. sell for 600.00 8. Alum coolant resv. black in color. 250.00. 9. Tokico adjustible front (coil overs already installed0 and rear shocks. front never installed rears have 600 miles. Sell 475.00 10. 11. Aeroforce gauges (2). works great with a pillar pod. This also comes with the additional lenses for the SVT look. sell for 425.00 12. Locked SCT tuner. 150.00 13. 14. Aeroforce kit for Nitrous. 75.00 (brand new) 15. Aeroforce kit for wideband 100.00 (brand new) 16 17. 18. New timing chain setup (ford Racing). 300.00 19. High volume oil pump 65.00 (brand new). 20. Motor mounts & trans mount Brand new 280.00 21 22. 23. New Ram clutch for stock trans. 275.00 24. Flaming River steering shaft. Brand New.. 25. UPR bump steer kit 26. Used power mirrors worked fine when pulled. Checked and still workmas they should. 27. 03 mach 1 intake polished and ported. was not cut open. 28. 2001 cobra intake lid brand new polished and ported. 29. New assorted bolts bought New from Ford. ( valve covers / oil pan etc etc..) 30. Assorted gaskets (header / oil pan / intake / ( etc etc) 31. Oil cooler Brand new from Ford. Will add more as I unpack the boxes.. Really not wanting to ship big items.. But will ship other items. All prices above does not include shipping or paypal fees. I will check pricing and if I am high I will adjust as I see. I left alot of performance items on the car. But just was tired of striping her!!! If anyone wants to know I bought a New 2013 Boss 302.. This is the last year they are building them.. My e-mail address is ffrederickson2@comcast.net. I can send pictures as needed. Let me know..
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know Last edited by fredfred; 05-29-2013 at 09:54 PM. Reason: additional info |
02-12-2013, 11:33 PM | #2 |
Screaming Yellow
Join Date: Sep 2011
Location: Houston, TX
Posts: 676
|
Re: Mach 1 Parts and Performance Parts
Email sent
__________________
2004 Screaming Yellow Mach 1 |
02-12-2013, 11:52 PM | #3 |
Registered User
Join Date: Feb 2012
Location: connersville, IN
Posts: 604
|
Re: Mach 1 Parts and Performance Parts
Could I see the valve covers and cop covers please. 765 698 8511 if you wanta text em
|
02-13-2013, 03:46 PM | #4 |
Registered User
Join Date: Dec 2007
Location: beavercreek, oh
Posts: 4,695
|
Re: Mach 1 Parts and Performance Parts
Did you really pay $1600 for cams from Bullet?
__________________
https://www.facebook.com/groups/481330828691064/ |
02-13-2013, 09:19 PM | #5 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
Yes I did have the paperwork at my office. Have all of my receipts. I added up everything and totaled almost 20,000.!!!! Sold alot of my custom brackets to a friend of mine before I did my list. He felt bad and paid me what I paid for them.
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-13-2013, 09:30 PM | #6 |
Registered User
Join Date: Dec 2007
Location: beavercreek, oh
Posts: 4,695
|
Re: Mach 1 Parts and Performance Parts
Who sold you the cams? That's $300 more than I charge.
Specs?
__________________
https://www.facebook.com/groups/481330828691064/ |
02-13-2013, 10:14 PM | #7 |
Registered User
Join Date: Jun 2012
Location: Mc Donald, PA
Posts: 10
|
Re: Mach 1 Parts and Performance Parts
Interested in the headers. New or used? Shipping to Pittsburgh?
|
02-14-2013, 07:52 AM | #8 |
Whipple Blown!
Join Date: Jul 2005
Location: Coral Springs, FL
Posts: 642
|
Pics of Tokicos please
__________________
2003 Mach 1- Whipple 2.3 2008 GT- STS Single Turbo |
02-16-2013, 07:17 AM | #9 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
Sorry guys work has been crazy. I will do my best yo answer all of your emails.
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-17-2013, 10:00 PM | #10 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
Pics sent
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-17-2013, 10:03 PM | #11 |
Registered User
Join Date: Dec 2007
Location: beavercreek, oh
Posts: 4,695
|
Re: Mach 1 Parts and Performance Parts
headers?
__________________
https://www.facebook.com/groups/481330828691064/ |
02-18-2013, 09:03 PM | #12 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
Will send pics and measure tomorrow. e-mail me. Thanks! Fred
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-18-2013, 09:19 PM | #13 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
Also have ported and polished upper and lower intake 575.00
Intake spacer with bolts and gasket. will find out thickness. New Front cover used polished. 200.00 stock (non IUP) headrests 75.00 charcoal radio bezel New 65.00 charcoal instrument cluster bezel 45.00 all items plus shipping and paypal. Will be posting more.. Thanks! Fred
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-18-2013, 09:40 PM | #14 |
Registered User
Join Date: Dec 2007
Location: beavercreek, oh
Posts: 4,695
|
Re: Mach 1 Parts and Performance Parts
nasvt at yahoo
__________________
https://www.facebook.com/groups/481330828691064/ |
02-18-2013, 09:55 PM | #15 |
Registered User
Join Date: Dec 2008
Location: evansville indiana
Posts: 389
|
Re: Mach 1 Parts and Performance Parts
How much for the spacer?
__________________
2004 DSG Mach 1 - 11.79 1/4 (7.48 1/8) 1994 Cobra (terminator swap) -10.44 1/4 Last edited by wldtang; 02-20-2013 at 09:24 PM. |
02-18-2013, 10:27 PM | #16 |
Screaming Yellow
Join Date: Sep 2011
Location: Houston, TX
Posts: 676
|
Me either..but he told me he had a better deal
Sent from my LG-P509 using Tapatalk 2
__________________
2004 Screaming Yellow Mach 1 |
02-19-2013, 10:20 AM | #17 |
United We Stang
Join Date: Jun 2011
Location: Libertyvile, IL
Posts: 985
|
Re: Mach 1 Parts and Performance Parts
dibs on the alum DS
__________________
Black Staggered FR500's, SSS Adrenaline Cat-Back, JBA o/r h-pipe, MGW Short Throw Shifter, H&R SS Springs, Bilstein HD's, MM Bumpsteer, MM CC Plates, Kenny Brown Extreme Subframe Matrix, FRPP Alum Driveshaft, 2000 Cobra R front brake kit, MM pan hard bar, MM LCA's, K&N FIPK Intake, Bama Tune, Shaker Diverter, FRPP 3.73s, Moser 31 spline axles, FRPP diff cover, FRPP Traction-Lok diff, Kenny Brown Brake Ducts '04 Black 5-Speed Mach 1, 2000 Jeep Grand Cherokee |
02-19-2013, 09:36 PM | #18 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-19-2013, 09:41 PM | #19 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
deal pending. payment for headers and x-pipes. waiting on NASVT.
Will hold 24hours for you.
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-19-2013, 09:50 PM | #20 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
more parts...
New GT500 pumps 400.00 3 month old Pioneer Nav head unit. Sat Sirius ready bluetooth. paid 875.00. sell for 550.00. 50lbs injectors. (MSD brand) very little run time. 275.00. New trans mount New Polished Nitrous tank holder. 100.00 New edlebrock water pump. 200.00 OIl pan modified for windedge plate both together 275.00 plus paypal and shipping..
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-20-2013, 08:47 PM | #21 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
Well a few more parts to add to the list.
2003 2004 Cobra rear bumper. Brand new OEM. Still plastic wrap when shiped to me. Paid 600.00 Selling for 400.00 Plus shipping and Paypal.. Front Cobra Bumper cover with bezels and fogs. Brand new Not OEM. Paid 415.00 Shiped. Will Sell for 350.00 Plus shipping and Paypal fees. Both bumpers Brand new Never Painted..
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-20-2013, 09:25 PM | #22 |
Registered User
Join Date: Dec 2008
Location: evansville indiana
Posts: 389
|
Re: Mach 1 Parts and Performance Parts
__________________
2004 DSG Mach 1 - 11.79 1/4 (7.48 1/8) 1994 Cobra (terminator swap) -10.44 1/4 |
02-20-2013, 09:27 PM | #23 |
Registered User
Join Date: Dec 2008
Location: evansville indiana
Posts: 389
|
Re: Mach 1 Parts and Performance Parts
8. Alum coolant resv. black in color. 250.00.
Pics?
__________________
2004 DSG Mach 1 - 11.79 1/4 (7.48 1/8) 1994 Cobra (terminator swap) -10.44 1/4 |
02-20-2013, 09:30 PM | #24 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
pm email address or i can text them.
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-20-2013, 09:36 PM | #25 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Mach 1 Parts and Performance Parts
Drive shaft sold.. waiting on my to clear paypal will ship monday or tuesday.
thanks John M.
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|