How much money is in your mach? - Page 6 - 2003-04 Mach 1 Registry Owners Club

4.6mach · 04-12-2010, 07:30 PM

10k+ so far

Linumup · 04-12-2010, 08:15 PM

Thanks for all the compliments everyone . Its been a long road . Some good , some bad .
But im finally done ! Seriously ! Im so happy with the final product .
Looks good , great streetable car , fast enough at the track too !

I just wish i knew what i know now . Could have saved lots of time and money .
Havnt done anything to the car in over a year other then to drive it and perform general maintenance .

jasionox666x · 04-12-2010, 11:22 PM

Right now I think I have a dime in the glove compartment, a quarter in the front cup holder and a dime in the little change holding slots in the car, other then that, nothing.

jasionox666x · 04-12-2010, 11:23 PM

Quote:

Originally Posted by The AntiRice

new total as of a few days ago. shits gonna get messy.

baer decelarotors - 480
hawk hps pads - 158
slp line lock - 160
roush body kit w/wing - 790
sct sf3 programer - 400
MM castor camber plates - 200
MM front coil over kit - 369
MM shortened endlinks - 20
MM HD torque arm - 649
MM panhard bar - 340
MM exteme duty adj lcas - 470
MM rear coilover kit - 320
PSR k member - 1000
meziere electric water pump w/relay - 425
Canton coolant over flow tank - 170
Moser 31 spline axles - 275
Detroit true track differential - 500
Ford 4.10 gears - 180
gear install kit/master bearing kit - 100
Ford aluminum driveshaft - 325
Chrome staggered FR500s - 700
Corbeau CR1 micro suede seats with slot - 860
Nitto drag radials - 382
Nitto 555s - 326
Custom mandrel bent side exhaust - 800
Roush side exhaust tips - 342
Corbeau seat brackets - 198
smoked headlights - 190
MM bilstein sport shocks/struts - 698
urethane motor mounts - 140
urethane trans mount - 95
MM solid steering shaft - 250
MM FLSFCs - 150
Fidanza aluminum flywheel - 319
Fidanza 3.2 clutch 344
urethane steering rack bushings - 17
urethane pinion snubber - 10
K&N CAI - 295
Bassani catted midpipe - 499
Autometer triple pod - 67
NX efi wet kit - 580
NX genx2 upgrade kit - 390
NX window switch - 170
steeda battery relocation kit - 230
Optima red top - 170
AutoMeter Sport Comp water, oil pressure, and voltage guages - 180
3 switch nitrous control panel - 110
SCT 4 bank chip w/selector bezel - 300
Steeda bumpsteer kit - 160
Steeda x2 balljoints - 130
Canton power steering tank - 91
focus fuel pump - 210
steeda front swaybar - 180
steeda strut tower brace - 100
lightning force performance pro comp race radiator - 395
PHP spacer - 100
Steeda quadrant, adj cable, and firewall adj. - 100
MGW short throw w/ composite mach 1 knob - 239
shorty antenna - 20
Reische Performance 170 Degree t stat - 55
Even Flow GEN 2 Head Cooling Mod - 120
Recon 99-04 Mustang White LED Reverse Lights - 30
ac delete - 50
CHE Adjustable Rear Shock Tower Brace - 130
MRT Hood Strut Kit - 105
Tint Package for rear lights - 80
Fore Precision Works 03-04 Mach-1 High Flow Fuel Rails - 429
Electric Fuel Pressure Gauge - 246
Electric Nitrous Pressure Gauge - 240
Dual Dash Pod - 36
Single Steering Column Pod - 32
Corbeau Harness Bar - 300
Corbeau 3 Inch Harness Belts(5 point) - 300
PSR nitrous fuel line fitting - 120
total = 20141

im sure im missing a few small things and this doesnt include any welding for installations or maintenance like royal purple oil, trans, and diff changes etc. this also doesnt include paint on my body kit, shipping costs. lol this is the first time ive added everything up.

Rule # 1

Never add everything together, although you should keep all receipts.

Dantheman · 06-08-2010, 06:31 PM

Not a dime - completely bone stock - just turned 9,000 miles. Oh maybe a few million in polish, leather cleaner, etc. This is the one your grandchildren are going to see on Barrett-Jackson thirty years from now.

Con's Mach1 · 06-08-2010, 06:33 PM

470.00 a month in Car Payments! At least for a little while longer.

Con's Mach1 · 06-08-2010, 06:35 PM

Quote:

Originally Posted by Dantheman

Not a dime - completely bone stock - just turned 9,000 miles. Oh maybe a few million in polish, leather cleaner, etc. This is the one your grandchildren are going to see on Barrett-Jackson thirty years from now.

Let's see, I'll be 85 and dead....Nope, guess I'm going to miss that Barrett Jackson.

C Vo · 06-20-2012, 07:57 AM

Around 11k for me within 9 months.

ASH302 · 06-20-2012, 11:56 PM

Quote:

Originally Posted by C Vo

Around 11k for me within 9 months.

i know the feeling, lol

ASh

iudelt89 · 06-21-2012, 03:52 PM

About $2800 including tires and installations, but not including maintenance items such as plugs, oil, diff fluid, trans fluid etc.

Mods are:

MGW short shift
MM CC plates
MM bumpsteer
Kenny Brown extreme matrix subframe
H&R SS springs
Shaker Diverter
SSS Adrenaline Cat Back
Black 18" staggered FR500's (275/285) Nitto NT555
Shorty Antenna
K&N Drop In

Car was bone stock as of April this year

4vCrush · 06-21-2012, 06:14 PM

way tooo much $$$ .. 20k + =(

Machy uno · 06-22-2012, 02:44 PM

Hmmm..... I don't think I've ever added it all up... so, lets see (rounded as there's no way for me to actually go back and find some of the prices),

intake spacer - 150
Intake - 250
FLSFC - 200
STB - 225
Clutch - 225
Aluminum Flywheel - 250
Tuner - 350
C/C plates - 250
Rims & new tires to go - 1600
4.10's - 175
MM K-member - 1600
LCA - 200
Full stereo - 2500
Headers - 600
X-pipe - 275
Poly tranny and motor mounts - 150
Koni shocks - 600

I did most everything myself so I don't have to count installation prices. This adds up to $9k without the stuff I'm sure to be missing. I'll call it an even $10k then with rotors, pads, dot 5 brake fluid flushes, tranny flush, and cleaners I've used over the years to keep it in good condition. Ouch.....why did I have to look in this thread? It'll get even worse once I start my rear suspension build in a few months.....

mach one NY · 07-02-2012, 11:28 AM

Sequential rear signal light kit. Whatever that cost in 2004.

THATS IT.

WNTAMACH1 · 07-05-2012, 10:17 PM

I'd say about $3k or so. About to but some wheels and working on the rear end

JPJNTX · 07-05-2012, 10:26 PM

$13,500 for the car including the V trim, chrome mach wheels, 4.10s and MGW shifter. 300 for some new rear tires, and another 350 for some DRs on some black Cobras. Not a bad deal, I'd say. The car had 46k on it when we got it and looked brand new. A year later, it has 66k on it.

Saltyweasel · 07-06-2012, 12:47 AM

Not enough

Flash88 · 07-15-2012, 10:32 PM

suspension upgrades- $1100
Motor upgrades- $5500
drivetrain upgrades- $1200

=$7800. probably alittle more. Not bad for a built motor with a ported eaton swap making around 500whp

redmach2K3 · 07-18-2012, 10:20 AM

Im at about 35000 thousand in aftermarket modifications. After the motor and trans swap I stopped counting.

Here is the big part of the swap.

5.4 Forged DOHC motor 4500 Bucks
Sullivan Intake 1500
PA Supercomp C4 with TCI Pro X Converter 3000
Built 31 spline 8.8 1600
Wheels and Tires 1200
Turbo Kit 3200
Precision Turbo 1650
Fuel System 1500
All other turbo parts 1500

Don't want to look at part for part. It'll make me cry.

But im happy with what Im doing.

jaimoe · 07-18-2012, 01:03 PM

Purchase price in 07--$17000
mods total about $9800

I wish I had never seen this thread.

LOL

04dsgMACHONE · 07-20-2012, 03:01 PM

About .55 cents. 2 quarters and a nickel!

04-12-2010, 07:30 PM	#126
4.6mach Registered User Join Date: Sep 2008 Location: houston, tx Posts: 169	Re: How much money is in your mach? 10k+ so far __________________ Eaton swap complete 419rwhp 366rwtq SAE corrected http://i430.photobucket.com/albums/q...h/02f5e38a.jpg

04-12-2010, 08:15 PM	#127
Linumup Registered User Join Date: Sep 2005 Location: Hydes Md. Posts: 6,944	Re: How much money is in your mach? Thanks for all the compliments everyone . Its been a long road . Some good , some bad . But im finally done ! Seriously ! Im so happy with the final product . Looks good , great streetable car , fast enough at the track too ! I just wish i knew what i know now . Could have saved lots of time and money . Havnt done anything to the car in over a year other then to drive it and perform general maintenance . __________________ 1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING

04-12-2010, 11:22 PM	#128
jasionox666x Registered User Join Date: Feb 2010 Location: Horsham, PA Posts: 1,959	Re: How much money is in your mach? Right now I think I have a dime in the glove compartment, a quarter in the front cup holder and a dime in the little change holding slots in the car, other then that, nothing.

06-08-2010, 06:31 PM	#130
Dantheman Registered User Join Date: Mar 2008 Location: Manorville, NY Posts: 33	Re: How much money is in your mach? Not a dime - completely bone stock - just turned 9,000 miles. Oh maybe a few million in polish, leather cleaner, etc. This is the one your grandchildren are going to see on Barrett-Jackson thirty years from now. __________________ In the Corral - NEW RIDE - 2004 Mach 1 Screaming Yellow - Is there any other color?? A real pleasure to drive. ITS STABLE MATE - 1990 GT Street/Strip - Faster than the Mach - rear seat delete - black - real sleeper - A4 block to 352". The best - 1970 Boss 302 (T-boned at age 1 1/2) - Yellow/Black 1966 Fastback K-code Boy I must be old.

06-08-2010, 06:33 PM	#131
Con's Mach1 Registered User Join Date: Mar 2007 Location: Acworth, Georgia Posts: 2,564	Re: How much money is in your mach? 470.00 a month in Car Payments! At least for a little while longer.

06-20-2012, 07:57 AM	#133
C Vo Registered User Join Date: Feb 2012 Location: Houston Posts: 501	Re: How much money is in your mach? Around 11k for me within 9 months.

06-21-2012, 03:52 PM	#135
iudelt89 United We Stang Join Date: Jun 2011 Location: Libertyvile, IL Posts: 985	Re: How much money is in your mach? About $2800 including tires and installations, but not including maintenance items such as plugs, oil, diff fluid, trans fluid etc. Mods are: MGW short shift MM CC plates MM bumpsteer Kenny Brown extreme matrix subframe H&R SS springs Shaker Diverter SSS Adrenaline Cat Back Black 18" staggered FR500's (275/285) Nitto NT555 Shorty Antenna K&N Drop In Car was bone stock as of April this year __________________ Black Staggered FR500's, SSS Adrenaline Cat-Back, JBA o/r h-pipe, MGW Short Throw Shifter, H&R SS Springs, Bilstein HD's, MM Bumpsteer, MM CC Plates, Kenny Brown Extreme Subframe Matrix, FRPP Alum Driveshaft, 2000 Cobra R front brake kit, MM pan hard bar, MM LCA's, K&N FIPK Intake, Bama Tune, Shaker Diverter, FRPP 3.73s, Moser 31 spline axles, FRPP diff cover, FRPP Traction-Lok diff, Kenny Brown Brake Ducts '04 Black 5-Speed Mach 1, 2000 Jeep Grand Cherokee

06-21-2012, 06:14 PM	#136
4vCrush Mach Underhood Join Date: Feb 2012 Location: Oxnard California Posts: 558	Re: How much money is in your mach? way tooo much $$$ .. 20k + =(

06-22-2012, 02:44 PM	#137
Machy uno Registered User Join Date: Jun 2005 Location: houston, texas Posts: 1,499	Re: How much money is in your mach? Hmmm..... I don't think I've ever added it all up... so, lets see (rounded as there's no way for me to actually go back and find some of the prices), intake spacer - 150 Intake - 250 FLSFC - 200 STB - 225 Clutch - 225 Aluminum Flywheel - 250 Tuner - 350 C/C plates - 250 Rims & new tires to go - 1600 4.10's - 175 MM K-member - 1600 LCA - 200 Full stereo - 2500 Headers - 600 X-pipe - 275 Poly tranny and motor mounts - 150 Koni shocks - 600 I did most everything myself so I don't have to count installation prices. This adds up to $9k without the stuff I'm sure to be missing. I'll call it an even $10k then with rotors, pads, dot 5 brake fluid flushes, tranny flush, and cleaners I've used over the years to keep it in good condition. Ouch.....why did I have to look in this thread? It'll get even worse once I start my rear suspension build in a few months..... __________________ She was living in a single room with three other individuals. One of them was male and the other two, Well he!! the other two were females Gone but NOT FORGOTTEN http://www.cardomain.com/ride/330262

07-02-2012, 11:28 AM	#138
mach one NY FASTR THAN A SPDN BULLITT Join Date: Sep 2005 Location: New York ...'nuff said Posts: 540	Re: How much money is in your mach? Sequential rear signal light kit. Whatever that cost in 2004. THATS IT. __________________ ( I'm on the Highway To Hell . How come my GPS ain't working ?) "Thats not a BLOWER...Thats my WIFE !" OTHER CARS OF INTEREST: 1987 Ford Mustang GT SOLD 1985 Jeep CJ 7 Laredo STOLEN 1974 Chevy Nova SS SOLD 1964 Mercury Comet Caliente STOLEN I think there is a pattern here...

07-05-2012, 10:17 PM	#139
WNTAMACH1 WNTAMACH1 Join Date: Dec 2008 Location: New Orleans, LA Posts: 2,394	Re: How much money is in your mach? I'd say about $3k or so. About to but some wheels and working on the rear end __________________ 2004 Ford Mustang Mach 1-315 RWHP/ 336 RWTQ 2013 Ford Mustang GT 5.0 Auto- 421/406 SOLD 2013 Ford Taurus SHO PP - Daily Driver

07-05-2012, 10:26 PM	#140
JPJNTX Registered User Join Date: Jun 2011 Location: Houston, Tx Posts: 210	Re: How much money is in your mach? $13,500 for the car including the V trim, chrome mach wheels, 4.10s and MGW shifter. 300 for some new rear tires, and another 350 for some DRs on some black Cobras. Not a bad deal, I'd say. The car had 46k on it when we got it and looked brand new. A year later, it has 66k on it.

07-06-2012, 12:47 AM	#141
Saltyweasel Registered User Join Date: Feb 2012 Location: WI Posts: 104	Re: How much money is in your mach? Not enough __________________ 2004 Mach 1 Azure Blue Built 5.0L stroker P1SC w/ supporting mods Promotion 3650 with McLeod RXT clutch/flywheel 31 spline rear end w/ 3.73's JBA shorty headers, Magnaflow catted x-pipe, Borla Stingers

07-15-2012, 10:32 PM	#142
Flash88 Registered User Join Date: Jul 2011 Location: jacksonville Posts: 664	Re: How much money is in your mach? suspension upgrades- $1100 Motor upgrades- $5500 drivetrain upgrades- $1200 =$7800. probably alittle more. Not bad for a built motor with a ported eaton swap making around 500whp __________________ ___________________________ 70mm single turbo.

07-18-2012, 10:20 AM	#143
redmach2K3 Registered User Join Date: May 2007 Location: kansas Posts: 940	Re: How much money is in your mach? Im at about 35000 thousand in aftermarket modifications. After the motor and trans swap I stopped counting. Here is the big part of the swap. 5.4 Forged DOHC motor 4500 Bucks Sullivan Intake 1500 PA Supercomp C4 with TCI Pro X Converter 3000 Built 31 spline 8.8 1600 Wheels and Tires 1200 Turbo Kit 3200 Precision Turbo 1650 Fuel System 1500 All other turbo parts 1500 Don't want to look at part for part. It'll make me cry. But im happy with what Im doing. __________________ 2003 Mach 1 Mustang Torch Red Fully Modded 5.4 DOHC Fully built with Stalled Auto Break In Period starts now.

07-18-2012, 01:03 PM	#144
jaimoe Speed addict Join Date: Apr 2007 Location: Miami, FL Posts: 648	Re: How much money is in your mach? Purchase price in 07--$17000 mods total about $9800 I wish I had never seen this thread. LOL __________________ Best time 1/8th mi--7.65@90MPH 2003 DSG Mach 1 99/01 Cobra front bumper Darrin-Matic w/3500 stall converter 100 Shot 4.10 Gears Stock Springs KYB AGX adjustable shocks/struts tubular LCAs UPR dbl adj UCAs Custom SCT Tune 255/40/18 front 295/35/18 rear FR500 Wheels Custom RAI UPR O/R X-Pipe Roy spacer Flowmaster 40's I may not be as good as I once was, but I'm as good once as I ever was." "Just an old man having fun"

07-20-2012, 03:01 PM	#145
04dsgMACHONE Registered User Join Date: Apr 2010 Location: Winston-Salem, NC Posts: 494	Re: How much money is in your mach? About .55 cents. 2 quarters and a nickel! __________________ 2004 DSG Mach 1 MGW STS, JLT RAI, PHP 3/8" Intake spacer, Bassani catted x-pipe, Magnaflow Magnapacks, FRPP (Motive) 4.30s, 31 Spline Cobra Differential, 31 Spline Moser Axles, GMS Girdle, H&R Super Sports, Koni Yellow Adjustable shocks/struts, MM caster/camber plates

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)