2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Body, Chassis & Interior

Body, Chassis & Interior Body, Chassis and Interior mods/discussions

Reply
 
Thread Tools Display Modes
Old 12-31-2019, 03:55 PM   #1
KEVINC666666
Registered User
 
Join Date: Dec 2019
Location: Corpus Christi, Texas
Posts: 13
Shaker bezel part number?

Good afternoon all,

Okay so I’m working on why I’m getting a leak on my shaker system into the engine compartment, I see a NOS shaker bezel for sale, part number
3R3Z-16C878-AA, the bezel that I purchased from Ford 13 years ago has a different part number, 3R33-16F084-AB, my bezel will not fit flush against the underside of the hood, three inch gap where water is getting through into the engine compartment, were there different shaker bezels?
__________________
2000 GT Convertible Mustang
2003 Mach 1 Engine
UPR K Frame and springs
Mach 1 front and rear brakes
C&L cold air induction
17X8 AVS Chrome Mach 1 rims
4.30 Ford Racing Gears
Ford Racing aluminum D/S
KEVINC666666 is offline   Reply With Quote
Old 12-31-2019, 04:08 PM   #2
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: Shaker bezel part number?

Quote:
Originally Posted by KEVINC666666 View Post
Good afternoon all,

Okay so I’m working on why I’m getting a leak on my shaker system into the engine compartment, I see a NOS shaker bezel for sale, part number
3R3Z-16C878-AA, the bezel that I purchased from Ford 13 years ago has a different part number, 3R33-16F084-AB, my bezel will not fit flush against the underside of the hood, three inch gap where water is getting through into the engine compartment, were there different shaker bezels?
its pretty common for part numbers to change over time, I can't recall a Ford oem shaker setup on anything else, can't imagine it would be a different number.

unless its seriously drooping a 3" gap is huge, some pictures of your setup might help figure out whats going on. You don't have a k-member or engine mounts for lowering a motor do you?
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 12-31-2019, 04:39 PM   #3
KEVINC666666
Registered User
 
Join Date: Dec 2019
Location: Corpus Christi, Texas
Posts: 13
Re: Shaker bezel part number?

Quote:
Originally Posted by DSG2003Mach1 View Post
its pretty common for part numbers to change over time, I can't recall a Ford oem shaker setup on anything else, can't imagine it would be a different number.

unless its seriously drooping a 3" gap is huge, some pictures of your setup might help figure out whats going on. You don't have a k-member or engine mounts for lowering a motor do you?

Good afternoon,

Yep, have a UPR K frame with polyurethane engine mounts, the bezel I have never fit tight against the drivers side corner, was outside before and took off the bezel to see where it might be hitting, took off the hood insulated as well, that drivers corner will not fit flush, didn’t know if there’s a technique to this, darn pics won’t upload
__________________
2000 GT Convertible Mustang
2003 Mach 1 Engine
UPR K Frame and springs
Mach 1 front and rear brakes
C&L cold air induction
17X8 AVS Chrome Mach 1 rims
4.30 Ford Racing Gears
Ford Racing aluminum D/S
KEVINC666666 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:42 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<