|
|
Photo Gallery | $ Donations $ | Register | FAQ | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here! |
|
Thread Tools | Display Modes |
12-06-2008, 12:14 AM | #1 |
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Custom Mach 1 Grill Emblem
I made myself a custom Mach 1 grill emblem, and I've had some interest from others who wanted it. So I decided I could make a few and post them up for sale. The brackets are powdercoated black, and the letters are OEM Mach 1 letters. Price will be $80 shipped to your door and ready to bolt onto your car.
Here's a few pics of the one I made for my car:
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com Last edited by TorchedMach1; 05-11-2009 at 09:54 PM. |
12-06-2008, 01:04 PM | #2 |
Registered User
Join Date: Apr 2008
Location: Chicago, IL
Posts: 370
|
Re: Custom Mach 1 Grill Emblem
Looks like I'll be the 2nd person besides you with this .......I'll post some pics on the car as soon as it gets here.
Thanks again, Eddie
__________________
2003 Mach 1 (The Black Slowmatic) 13.1 @ 106mph / 2.05 60ft before stall and dr
|
12-06-2008, 01:39 PM | #3 |
Parked again...
Join Date: Jul 2006
Location: Pensacola, Florida
Posts: 2,041
|
Re: Custom Mach 1 Grill Emblem
I like it and I don't like it at the same time. Hmm. I never usually have that problem. But, thanks for showing me what the 99-01 Cobra bumper looks like with the '03 Cobra chin. I was wondering about that.
__________________
Sold but not forgotten... 2004 Torch Red Mach 1 IUP / 5-Speed Mach #238576 Modifications | Borla Stinger's | Painted C&L Intake | 15% Tint | Powdercoated Valve Covers | '01 Cobra Tails | '04 Cobra Mirrors | '01 Cobra Bumper | '01 Bullitt Skirts | FR500 Steering Wheel | MGW Shifter | 3/8" Spacer | IAC Restrictor | 17x9/10.5 Mach's | 275/315 Vredestein's | MM Subframe Connectors | Tokico D-Spec's | MM 4-Bolt C/C Plates | H&R Super Sport's | Build Number | #6935 of 7182 |
12-07-2008, 05:48 PM | #4 |
Registered User
Join Date: Jul 2008
Location: Danville, ky
Posts: 165
|
Re: Custom Mach 1 Grill Emblem
How well did that chin fit, have to do much to it to make it fit.
I have the mach 1 chin on my 99/01 bumper and it doesnt fit that great jon |
12-08-2008, 05:49 PM | #5 | |||
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Re: Custom Mach 1 Grill Emblem
Quote:
Quote:
Quote:
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com |
|||
12-08-2008, 09:40 PM | #6 |
Parked again...
Join Date: Jul 2006
Location: Pensacola, Florida
Posts: 2,041
|
Re: Custom Mach 1 Grill Emblem
No kidding!
__________________
Sold but not forgotten... 2004 Torch Red Mach 1 IUP / 5-Speed Mach #238576 Modifications | Borla Stinger's | Painted C&L Intake | 15% Tint | Powdercoated Valve Covers | '01 Cobra Tails | '04 Cobra Mirrors | '01 Cobra Bumper | '01 Bullitt Skirts | FR500 Steering Wheel | MGW Shifter | 3/8" Spacer | IAC Restrictor | 17x9/10.5 Mach's | 275/315 Vredestein's | MM Subframe Connectors | Tokico D-Spec's | MM 4-Bolt C/C Plates | H&R Super Sport's | Build Number | #6935 of 7182 |
12-11-2008, 10:11 PM | #7 |
Guest
Posts: n/a
|
Re: Custom Mach 1 Grill Emblem
Very nice! I like it.
|
12-11-2008, 10:40 PM | #8 |
S281
Join Date: Mar 2007
Location: Texas
Posts: 562
|
Re: Custom Mach 1 Grill Emblem
can I see some pics of those wheels. They look nice. The emblem is innovative I might just pick one up.
__________________
S281 |
12-11-2008, 10:48 PM | #9 |
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Re: Custom Mach 1 Grill Emblem
Pm sent
Here's a link to that has some better pics of my wheels. Just scroll down a tad. http://www.mach1registry.org/forums/...ad.php?t=86726
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com |
12-31-2008, 09:31 AM | #10 |
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Re: Custom Mach 1 Grill Emblem
bump
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com |
01-05-2009, 08:24 PM | #11 |
Registered User
Join Date: May 2008
Location: Virginia Beach, VA
Posts: 33
|
Re: Custom Mach 1 Grill Emblem
Hey man I want one of these. Do they come in any colors or what?? I get paid friday so the money will be in to you sometime after that. PM me and let me know
__________________
2004 Screamin' Yellow Mach 1: FRPP 3:73's, 6 point roll cage, and a lot more to come. |
01-05-2009, 10:11 PM | #12 |
Registered User
Join Date: Nov 2005
Location: Shrevport La
Posts: 1,110
|
Re: Custom Mach 1 Grill Emblem
you have any left???
__________________
PERFORMANCE Mac Lt & Mac off road X pipe JLT RAI MGW Shifter Moser 31 spline axles 456 gears auburn true trac differential PSR K member & MM front and rear coil over's, heavy duty lower control arms Steeda 4 point caster camber plates CCW 16x5.5" fronts 16x10" rears w/ Hoosier 28x10 slicks Cobra side skirts 6000 HID Steeda STB interior guages 03-04 cobra mirrors |
01-05-2009, 11:26 PM | #13 |
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Re: Custom Mach 1 Grill Emblem
Sent both of ya PM's
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com |
01-06-2009, 12:40 AM | #14 |
Registered User
Join Date: Oct 2007
Location: Chicago, IL
Posts: 57
|
Re: Custom Mach 1 Grill Emblem
Just sent payment.
Was informed that it will be shipped within one week from today as he has to custom make them. Will keep everyone updated on the progress. Regards
__________________
10/13/2007 - was the day I became a happy owner of a 2003 DSG Mach1 Borla Stinger Cat Back // Mac Off Road H Pipe // MGW Short Shifter // JLT RAI // Roy's Intake Spacer // Accufab Throttle Body // SCT Tuned |
01-06-2009, 12:44 AM | #15 |
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Re: Custom Mach 1 Grill Emblem
I received Payment and will get it on its way to ya as soon as possible.
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com |
01-12-2009, 11:11 PM | #16 |
Registered User
Join Date: Apr 2008
Location: Chicago, IL
Posts: 370
|
Re: Custom Mach 1 Grill Emblem
These emblems are great. I cant seem to get a good pic, due to the way the car is stored in the garage right now. I wish you guys could see this in person. Great quality, and customer service.
__________________
2003 Mach 1 (The Black Slowmatic) 13.1 @ 106mph / 2.05 60ft before stall and dr
|
01-14-2009, 02:25 AM | #17 | |
Registered User
Join Date: Aug 2008
Location: Bay Area, CA
Posts: 60
|
Re: Custom Mach 1 Grill Emblem
Quote:
http://www.maierracing.com/ P.S. - Cool custom grill emblem
__________________
1999 COBRA #1945 of 4040 - Built SRA w/ 4.56's , PP Lower w/ 3/8 spacer, Bolt-ons, BBS RK's 18 x 8.5/10, Full Exhaust, Suspension, Can Diablo Tune and some 01/03 Cobra body parts |
|
01-16-2009, 11:48 PM | #18 |
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Re: Custom Mach 1 Grill Emblem
Just to let you guys know there brackets are now being powdercoating black for durability.
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com |
01-28-2009, 12:31 AM | #19 |
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Re: Custom Mach 1 Grill Emblem
Hey guys just gonna let you know I just got a batch of these finished up and I made a few extras. I have three left for sale.
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com |
02-05-2009, 01:44 PM | #20 |
Registered User
Join Date: Oct 2007
Location: Chicago, IL
Posts: 57
|
Re: Custom Mach 1 Grill Emblem
*Update*
I did receive the emblem today. Everything looks good, I would buy from TorchedMach1 again. Very honest and informative guy. I will put it on my mach and take pictures as soon as it gets warmer.
__________________
10/13/2007 - was the day I became a happy owner of a 2003 DSG Mach1 Borla Stinger Cat Back // Mac Off Road H Pipe // MGW Short Shifter // JLT RAI // Roy's Intake Spacer // Accufab Throttle Body // SCT Tuned |
02-05-2009, 10:49 PM | #21 |
Registered User
Join Date: Dec 2008
Location: Chicago, IL
Posts: 907
|
Re: Custom Mach 1 Grill Emblem
Take some pics saturday. 50*:THUMBSUP:
__________________
2004 Mach 1 - Screaming Yellow - 5 speed - IUP - 1 of 624 Full Bolt-ons, Built Rear, NX 100 shot, tune by Tim Barth @ MPH N/A - 12.7 @ 107 (1.70) N2O - 380rwhp 487rwtq 12.03 @ 110 (1.55) SOLD 2004 Cobra - Screaming Yellow - T56 - 1 of 299
KB 2.8H @ 20lbs, 98 Intake Cams, E85, Tune by Tim Barth @ MPH 711rwhp 635rwtq |
02-05-2009, 11:03 PM | #22 |
Registered User
Join Date: Mar 2007
Location: Covington, Ga.
Posts: 475
|
Re: Custom Mach 1 Grill Emblem
i like it too....
will you be making more soon?
__________________
|
02-05-2009, 11:42 PM | #23 | ||
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Re: Custom Mach 1 Grill Emblem
Quote:
Quote:
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com |
||
02-09-2009, 03:34 PM | #24 |
Registered User
Join Date: Mar 2007
Location: Covington, Ga.
Posts: 475
|
Re: Custom Mach 1 Grill Emblem
PM returned........didn't get the notification of a PM or reply to this thread. gotta check my settings again.
__________________
|
02-10-2009, 11:51 AM | #25 |
TorchedMach1
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
|
Re: Custom Mach 1 Grill Emblem
WuD your emblem will be on it was soon.
I only have one of these left!!!
__________________
Arizona's Fastest Mach 1 11.14 @ 120 w/ 1.48 60' 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|