|
04-15-2009, 09:45 AM | #1 |
Shake and Bake
Join Date: Dec 2003
Location: Tallahassee, FL
Posts: 485
|
Water getting under Coil Cover
Has anyone had this experience, the plugs closet to the firewall get it the most. The passenger side is the worst, I hardly ever spray water on my engine. Rain splashes up and finds it way down onto the plugs, I have my coil cover tight, but it looks like the gaskets have never done there job.
__________________
Light em up...If you can |
04-15-2009, 10:46 AM | #2 |
Registered User
Join Date: Apr 2008
Location: Chicago, IL
Posts: 370
|
Re: Water getting under Coil Cover
seal it with some RTV..........lots of threads about this. Most common is the passenger side 2 cyl closest to passenger compartment.
__________________
2003 Mach 1 (The Black Slowmatic) 13.1 @ 106mph / 2.05 60ft before stall and dr
|
04-15-2009, 10:52 AM | #3 |
Speed addict
Join Date: Apr 2007
Location: Miami, FL
Posts: 648
|
Re: Water getting under Coil Cover
Even Ford knew this was a problem because they sealed the grommet with RTV on initial installation of the cover.
__________________
Best time 1/8th mi--7.65@90MPH 2003 DSG Mach 1 99/01 Cobra front bumper Darrin-Matic w/3500 stall converter 100 Shot 4.10 Gears Stock Springs KYB AGX adjustable shocks/struts tubular LCAs UPR dbl adj UCAs Custom SCT Tune 255/40/18 front 295/35/18 rear FR500 Wheels Custom RAI UPR O/R X-Pipe Roy spacer Flowmaster 40's I may not be as good as I once was, but I'm as good once as I ever was." "Just an old man having fun" |
04-15-2009, 11:28 AM | #4 |
Shake and Bake
Join Date: Dec 2003
Location: Tallahassee, FL
Posts: 485
|
Re: Water getting under Coil Cover
Yes, you are correct, they should have figured out a better solution
__________________
Light em up...If you can |
04-15-2009, 11:52 AM | #5 |
Registered User
Join Date: May 2008
Location: LaPorte, IN
Posts: 356
|
Re: Water getting under Coil Cover
Yep, make sure all your COP's are good and seal the crap out of it with RTV. GM has the best set-up for COP ignition, but it's DARN EXPENSIVE to replace.
__________________
MGW Short Shifter MM LCA's MM firewall adjuster MM Clutch quadrant Mac O/R Prochamber Bassani Cat-back FRPP Girdle JLT RAI FRPP Alum. Driveshaft 1/2" intake spacer 18" Mach Wheels Mach 460 delete SCT X3 Brenspeed tune 4.10's soon hopefully along with the 31-spline conversion when funds available. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|