WOT BOX install help
Looking for a little wiring help with getting my WOT BOX installed correctly. Recently purchased the N2MB WOT BOX for my 03 Mach 1 and wired it per the detailed instructions. When I did the before "start up" tests, the WOT BOX was not responding to me pressing the clutch down. I tied the Green wire coming from the WOT BOX into the correct light green wire on the "cruise control clutch safety/shutoff switch" located under the dash. Has anyone else had issues with the clutch switch when installing their WOT BOX? Thanks.
Last edited by GlideTrain; 06-30-2017 at 09:22 AM.
|