WTB,Cats needed for my 04 Mach

[KUDA427]

So I just picked up my mach,unfortunately my county requires emissions testing.....guess what...no cats on my mach
So.....I'm guessing I'm in need,can't get it tagged without passing emissions
Any help would be greatly appreciated
Thanks
Ed

[Sinned83]

Pick up a catted X pipe and O2 extensions.

[KUDA427]

Yep,that's what my research is telling me also

[4vlover]

Factory one? Thom on here has it for ya

[KUDA427]

Cool,hopefully he'll chime in
I'd be interested in aftermarket as well
I'm sure I'll need the o2 sensors too
I haven't had a chance to get it up on a rack yet,but from what I can see
Looks like there's the factory h pipe
Couple of Flowmasters

[4vlover]

Just buy my longtubes and midpipe!

[noodle9400]

Factory h-pipe had 4 cats on it. Not sure if they were cut out and welded in piping, but if you have a no cats, then either previous owner turned off the sensors with a tune or you have O2s in there with plug-in MIL eliminators to turn off the check engine light. If the sensors are turned off you may get away with getting imitation cats welded in which basically look like cats on the outside with a straight pipe on the inside or you can get cats welded in. That would be the cheaper way. If looking for aftermarket theres plenty of options.

[Arun]

I have to test here in washington also, my sensors are turned off with my tuner ,no check light . I have a mac h pipe not cats and borla stingers , and i pass . They used to put you on the rollers here but now they just plug into you obd2 ports and hold you rpms to get there reading .

[KUDA427]

I believe that's what they do here also
Hmmmm
Guess we'll see tomorrow
It's got the h pipe,no cats and Flowmasters

[noodle9400]

Wish I could get away with sensors turned and no cats. They roll the car over a floor cam to check for cats. I don't remember if they revved the engine but they do plug it into the diagnostic port.

[KUDA427]

Well,she's tagged!!!!
Passed etest!
Tech didn't look underneath. ...

Guess I don't need cats!!!!!

[jcamaro]

if down the road you need one I have the hole setup from the front piped to the mid flange connecter. I put a x-pipe on so have the left over pipes and cats