2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Engine & Drivetrain (Including trans & rear axles)

Reply
 
Thread Tools Display Modes
Old 07-17-2010, 09:43 AM   #1
Bmeagher
Registered User
 
Bmeagher's Avatar
 
Join Date: Feb 2008
Location: Cowtown, Alberta
Posts: 1,261
3650 rattle

Is it normal for these trannys to make noise at light throttle in 2,3-4....like gear clash? Off the gas, or wot no noise, anyone have any similar problems?
__________________
Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar.
Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF,
FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.
SAE 378RWHP ,302 ft/lbs
70-120mph run
http://www.youtube.com/watch?v=1hqjiOeYWAE
Bmeagher is offline   Reply With Quote
Old 07-19-2010, 03:31 PM   #2
Blackened04
Registered User
 
Join Date: Jun 2010
Location: Seattle, WA
Posts: 35
Re: 3650 rattle

Not sure if its normal or not, but my tranny likes to make noises in 5th gear for some reason.
Blackened04 is offline   Reply With Quote
Old 07-19-2010, 03:48 PM   #3
Bmeagher
Registered User
 
Bmeagher's Avatar
 
Join Date: Feb 2008
Location: Cowtown, Alberta
Posts: 1,261
Re: 3650 rattle

No one hears any noise from they're tranny?
__________________
Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar.
Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF,
FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.
SAE 378RWHP ,302 ft/lbs
70-120mph run
http://www.youtube.com/watch?v=1hqjiOeYWAE
Bmeagher is offline   Reply With Quote
Old 07-19-2010, 06:06 PM   #4
WeezieMarion
Registered User
 
Join Date: Jul 2005
Location: under a rock
Posts: 367
Re: 3650 rattle

Quote:
Originally Posted by Bmeagher View Post
Is it normal for these trannys to make noise at light throttle in 2,3-4....like gear clash? Off the gas, or wot no noise, anyone have any similar problems?
Sounds more like the diff. making noise when at light throttle. I have 4.10s in with a short shifter and what can I say but it's a noisy drive train, they did not put a lot into noise dampening on this Mustang at the factory.
__________________
2004 Comp orange
-293.7 rwhp
-320.3 rwtq
-MGW w/cobraBob gasket
-Predator can tune (custom tune soon)
-K&N CAI
- 4.10 REM Iso-superfinish
- MAC Catback
WeezieMarion is offline   Reply With Quote
Old 07-19-2010, 06:56 PM   #5
Bmeagher
Registered User
 
Bmeagher's Avatar
 
Join Date: Feb 2008
Location: Cowtown, Alberta
Posts: 1,261
Re: 3650 rattle

I know rear diff noise, i have that also. I can live with it, but the noise sounds like its right below the shifter, or maye a little farther ahead.
__________________
Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar.
Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF,
FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.
SAE 378RWHP ,302 ft/lbs
70-120mph run
http://www.youtube.com/watch?v=1hqjiOeYWAE
Bmeagher is offline   Reply With Quote
Old 07-19-2010, 11:39 PM   #6
gamatt
Mustang Fanatic
 
Join Date: Jun 2009
Location: Dacula, GA
Posts: 963
Re: 3650 rattle

Quote:
Originally Posted by Bmeagher View Post
I know rear diff noise, i have that also. I can live with it, but the noise sounds like its right below the shifter, or maye a little farther ahead.
I get the same thing lugging in 5th at 45-55 mph. My '92 LX used to do it also.
gamatt is offline   Reply With Quote
Old 07-20-2010, 11:33 AM   #7
Ucmefly2
Registered User
 
Ucmefly2's Avatar
 
Join Date: Jul 2009
Location: franklin ky
Posts: 301
Re: 3650 rattle

I have it also, i have replaced my tranny twice, i have also put a t56 in my car. i am back on another 3650 now and i have a rattle noise when its cold in netural and crusing in 5th i have a noise. It sounds like a fork missing the little plastic thing and just a rattle, tranny shifts fine, drives fine just noisey. if you put your hand on the shifter and push up or down while in gear it goes away. i also took my pro 5.0 shifter out of my car due to it amplifing the nosie.
__________________
2004 Torch Red Mach 1
Jlt Ram air
4.10
Prochamber
Roys 1/2 spacer
Nx wet kit
Cut springs lowered
sct tuner
Ucmefly2 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:05 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<