2003-04 Mach 1 Registry Owners Club  

Best Mustang Parts

Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Body, Chassis & Interior

Body, Chassis & Interior Body, Chassis and Interior mods/discussions

Reply
 
Thread Tools Display Modes
Old 07-03-2017, 06:05 PM   #1
Oxford04auto
Registered User
 
Join Date: Jul 2016
Location: Nampa,idaho
Posts: 28
Air conditioning question....

I didn't see a spot for this so......when I bought my mach the previous owner took the ac system out and put a ford racing bypass pulley on it....everything is there under the dash but nothing is there under the hood.....what all will I need to get my air back,and I'm wondering if the mustang gt,v6 all have the same ac...if so I can get it all from junk yard or salvage place...
Oxford04auto is offline   Reply With Quote
Old 07-03-2017, 09:02 PM   #2
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 7,917
Re: Air conditioning question....

Wouldn't surprise me if it matches, check on a site like tasca ford parts.

You should at least replace the orifice tube and dryer/accumulator
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 07-07-2017, 01:45 PM   #3
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,641
Re: Air conditioning question....

lmr.com has most of the required parts for your AC system, they tend to buy out ford's surplus of OEM parts and they have good prices.

I would go new, much less headaches and if you get one bad part then it can ruin other items down stream.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body - WickedCustoms in Lewisville, Tx
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 07-08-2017, 05:56 PM   #4
mikeracing
MECHANIC
 
mikeracing's Avatar
 
Join Date: Jun 2012
Location: Morgantown, WV
Posts: 808
Re: Air conditioning question....

Compressor lines, switches, and condensor. The compressor buy new or reman, reciever dryer condensor lines and switches( should be 1 high and 1 low ) new. Are the major pieces

Remember to evacuate the system and add the correct amount of oil. IMO vaccuum out the sygstem and let it sit overnight with as close to 30in vac you can get. Since the system has been open so long you are also going to want to flush the evap. Just a thought the evap could be bad under the dash and it was easier for the po to remove the under good equip.
mikeracing is offline   Reply With Quote
Old 07-10-2017, 05:21 AM   #5
Mike03Mach
Registered User
 
Mike03Mach's Avatar
 
Join Date: Mar 2017
Location: Tucson, Az
Posts: 63
Re: Air conditioning question....

The previous owner did the same thing to mine. I bought it in March for a good price and it cost a pretty penny to get the AC system installed. I went to 2 shops and got quotes, I then pieced everything together. It ended up costing over $1500 parts and labor. I thought about getting used parts, but didn't want it breaking on me in the hot Arizona summers. I have a 2 year warranty on parts and labor also.
__________________
1st: 1998 v6
2nd: 2000 GT
Current: 2003 Mach 1
Mike03Mach is offline   Reply With Quote
Old 07-14-2017, 10:41 PM   #6
Oxford04auto
Registered User
 
Join Date: Jul 2016
Location: Nampa,idaho
Posts: 28
Re: Air conditioning question....

thanks everyone for your input...all she needs is the AC done and new shocks and struts....everything else is about as good as one could hope for....with it being such a rare car and my love of mustangs she was going to be sold,buuuuut I'm keeping her...1 of 179 is worth keeping....some 410's a stall,cams,and a tune and I'll be **** happy.
Oxford04auto is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:49 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<