2003-04 Mach 1 Registry Owners Club  

Best Mustang Parts

Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Wheels & Tires

Reply
 
Thread Tools Display Modes
Old 07-23-2015, 12:38 PM   #1401
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,721
Re: The Wheel Pictures Thread

So, question. I am looking at getting 17 x 10.5 rims for rear and running a 315/35R 17 Nitto 555R. Will these fit under rear with no issues. Rear has stock springs, front has 1/2 coil cut and will keep my 275 upfront. Dont want to pull the trigger and then kave rubbing or have to roll fenders, thanks guys
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 07-23-2015, 03:00 PM   #1402
mr-proper
Registered User
 
mr-proper's Avatar
 
Join Date: May 2011
Location: sc
Posts: 134
Re: The Wheel Pictures Thread

[QUOTE=not a gt;1604454]So, question. I am looking at getting 17 x 10.5 rims for rear and running a 315/35R 17 Nitto 555R. Will these fit under rear with no issues. Rear has stock springs, front has 1/2 coil cut and will keep my 275 upfront. Dont want to pull the trigger and then kave rubbing or have to roll fenders, thanks guys[/Q

you will be fine, i had 315/35/17 NT05 and worked perfect
mr-proper is offline   Reply With Quote
Old 07-23-2015, 07:28 PM   #1403
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,721
Re: The Wheel Pictures Thread

[QUOTE=mr-proper;1604459]
Quote:
Originally Posted by not a gt View Post
So, question. I am looking at getting 17 x 10.5 rims for rear and running a 315/35R 17 Nitto 555R. Will these fit under rear with no issues. Rear has stock springs, front has 1/2 coil cut and will keep my 275 upfront. Dont want to pull the trigger and then kave rubbing or have to roll fenders, thanks guys[/Q

you will be fine, i had 315/35/17 NT05 and worked perfect
Thanks
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 07-24-2015, 07:34 PM   #1404
Mustang9668
saving pennies
 
Mustang9668's Avatar
 
Join Date: Apr 2008
Location: Griffin, Ga
Posts: 1,487
Re: The Wheel Pictures Thread

I cut 1-1/4 coil off on my car with 315's. A lot bigger drop than what you are doing, but I had to roll my fenders because they were cutting in to the tire. If you have any issues with that at all let me know. I have an eastwood fender roller I'll let you borrow.
__________________
03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels

03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87 pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs
Mustang9668 is offline   Reply With Quote
Old 07-24-2015, 09:13 PM   #1405
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,721
Re: The Wheel Pictures Thread

Quote:
Originally Posted by Mustang9668 View Post
I cut 1-1/4 coil off on my car with 315's. A lot bigger drop than what you are doing, but I had to roll my fenders because they were cutting in to the tire. If you have any issues with that at all let me know. I have an eastwood fender roller I'll let you borrow.

Thanks man, I may only cut 1/2 coil on rear like I did the fronts..you still owe me a meet up/cruise
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 07-26-2015, 08:34 PM   #1406
Mustang9668
saving pennies
 
Mustang9668's Avatar
 
Join Date: Apr 2008
Location: Griffin, Ga
Posts: 1,487
Re: The Wheel Pictures Thread

Quote:
Originally Posted by not a gt View Post
Thanks man, I may only cut 1/2 coil on rear like I did the fronts..you still owe me a meet up/cruise
I haven't forgot. I think about it every time I see a show or event down your way. At some point life and weekends will slow down enough for me to make it down there.
__________________
03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels

03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87 pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs
Mustang9668 is offline   Reply With Quote
Old 07-27-2015, 10:44 PM   #1407
JBrantley
Registered User
 
JBrantley's Avatar
 
Join Date: Oct 2009
Location: Valdosta, GA
Posts: 65
Re: The Wheel Pictures Thread

18x8 TSW's. Gotta thank not a gt for getting me a killer deal sometime back
Attached Images
File Type: jpg 2015-07-27 21.40.43.jpg (191.7 KB, 79 views)
JBrantley is offline   Reply With Quote
Old 07-28-2015, 05:08 PM   #1408
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,721
Re: The Wheel Pictures Thread

Quote:
Originally Posted by JBrantley View Post
18x8 TSW's. Gotta thank not a gt for getting me a killer deal sometime back
They look really good on there
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 07-29-2015, 02:29 AM   #1409
XSELLR9
Registered User
 
XSELLR9's Avatar
 
Join Date: Jun 2010
Location: Radiator Springs
Posts: 205
Re: The Wheel Pictures Thread

AFS rear 17X 10.5 perfect in my opinion
__________________
2001 Bullitt true blue Fully Built (Daily Driver)
2003 Mach 1 Azure Blue (weekend ride)
2003 Cobra Competition Orange (weekend ride)
XSELLR9 is offline   Reply With Quote
Old 09-18-2015, 05:56 PM   #1410
gt97
Registered User
 
gt97's Avatar
 
Join Date: Jul 2014
Location: Lincoln, Ne
Posts: 5
Re: The Wheel Pictures Thread

I have been looking at the 17 x 10.5 Mach 1 wheels for a while and want to purchase a pair with the grey inserts. Does anyone know where I could find a new pair? I use to look on eBay, but haven't seen them listed in some time. I also know AFSwheels use to sell them back in the day, but I haven't found a place recently that would have them in stock.

http://www.shop.afswheels.com/Mach-1...1.htm?page=all

http://www.ebay.com/itm/AFS-fits-199...-/331204910746
gt97 is offline   Reply With Quote
Old 11-02-2015, 12:22 PM   #1411
Hpstang
Registered User
 
Hpstang's Avatar
 
Join Date: Apr 2015
Location: Kingsland ga
Posts: 398
Re: The Wheel Pictures Thread

Quote:
Originally Posted by mr-proper View Post
new setup
weld rts 17x8 and 15x9

care by hoffmann861, on Flickr

15x9
984286_918409748192019_7915993295161105704_n by hoffmann861, on Flickr

17x8
image2 by hoffmann861, on Flickr

no grinding need it for the rears
image1(1) by hoffmann861, on Flickr
What b/s for the front and rears and what size tires. I want those bad
__________________
2004 Mach 1 torch red, 5 speed, Borla stingers, off road Mac ss pro chamber, k&n drop in,sct x4 with custom dyno tune 308 rwhp 324 rwtq upr delete puck, MM flsfc, wild rides upper and lower torque box reinforcement kit. MGW shifter with standard handle, speed of sound pillar with dual aeroforce gauges,Bullitts black polished lip 17x8 front 17x10.50 nitto 555r's 315/35/17, smoked tail lights,smoked 3rd brake light. Engine dress up parts. It's only just the beginning procharger coming soon
Hpstang is offline   Reply With Quote
Old 11-04-2015, 05:53 PM   #1412
matthayn
Registered User
 
matthayn's Avatar
 
Join Date: Dec 2010
Location: Jackson, TN
Posts: 308
Re: The Wheel Pictures Thread

Ermergerd those Weld RTS, much want!!! Yes need to know BS on those that clear the brakes!
__________________
2003 Mach 1
Aluminator // Eaton @ 10lbs // T56 Magnum // E85
Build thread: http://www.svtperformance.com/forums...-Picture-Heavy
IG: boostedmach
matthayn is offline   Reply With Quote
Old 11-04-2015, 07:06 PM   #1413
slojunk91
Registered User
 
slojunk91's Avatar
 
Join Date: Feb 2013
Location: NEW YORK HIGHEST TAXES IN AMERICA
Posts: 605
Re: The Wheel Pictures Thread

Quote:
Originally Posted by matthayn View Post
Ermergerd those Weld RTS, much want!!! Yes need to know BS on those that clear the brakes!
Id say 5.5.
slojunk91 is offline   Reply With Quote
Old 05-02-2016, 11:43 AM   #1414
bleedingfordblu
Registered User
 
bleedingfordblu's Avatar
 
Join Date: May 2007
Location: Leesburg, VA
Posts: 1,985
Re: The Wheel Pictures Thread

its been a long time since I've posted. Here's how it sits now with 18x9 and 18x10's. 275/35 and 305/35









__________________
2003 Azure Blue Mach 1

Stock bottom end/compression
Eaton M112
Stock upper
Stock lower
K&N intake
Built T56
Bassani mid length headers
Bassani catted x pipe
Bassani slash cut tip catback
Stock 03 Cobra IRS
18x9/10 Forgestar F14
Tuned by Chris Macduff at IMA motorsports
429hp 407 tq @ 7.5 lbs of boost
bleedingfordblu is offline   Reply With Quote
Old 05-02-2016, 10:51 PM   #1415
ab_mach1
Registered User
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Brownsburg, IN
Posts: 1,981
Quote:
Originally Posted by bleedingfordblu View Post
its been a long time since I've posted. Here's how it sits now with 18x9 and 18x10's. 275/35 and 305/35





















They look great!
__________________
  • Azure Blue 04 Mach 1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 05-04-2016, 03:38 PM   #1416
Tom Yancy
Registered User
 
Join Date: Oct 2013
Location: Attalla Alabama
Posts: 130
Re: The Wheel Pictures Thread

Not a fan of black wheels, but I do think they look good on blue cars. That AB Mach is really sweet!
Tom Yancy is offline   Reply With Quote
Old 05-04-2016, 10:53 PM   #1417
ab_mach1
Registered User
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Brownsburg, IN
Posts: 1,981





Instagram - @ab_mach1
__________________
  • Azure Blue 04 Mach 1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 05-05-2016, 08:11 AM   #1418
Rob04Mach1
Registered User
 
Join Date: Dec 2015
Location: Selden, NY
Posts: 96
Re: The Wheel Pictures Thread

Ford Racing Bullitt Wheels
Front 17 x 9 w/ Falken Azenis FK452, 245/45 ZR17
Rear 17 x 10.5 w/ Mickey Thompson ET Street Drag Radials P315/35R17


__________________
04 Mach 1, Aluminum 4.6L DOHC w/Procharger P1SC & Stage II 3 Core Intercooler
Level 10 4R70W, Convertor, 8.8 w/3.5 Posi, Snow Perf Stage 2 Methanol Injection
Rob04Mach1 is offline   Reply With Quote
Old 03-14-2017, 03:16 PM   #1419
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 4,884
Re: The Wheel Pictures Thread

Changed shoes
Decided to do all gloss black fr5's
Attached Thumbnails
IMG_1985.jpg  
__________________
JB

03 Torch Red Mach 1

Stainless Steel Systems Adrenaline Series
18x9 - Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
(installed by Pyle Bros)
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
jbrad88 is offline   Reply With Quote
Old 03-14-2017, 03:44 PM   #1420
TRbetngu
Registered User
 
TRbetngu's Avatar
 
Join Date: Aug 2011
Location: Springfield, MO
Posts: 1,048
Re: The Wheel Pictures Thread

Quote:
Originally Posted by jbrad88 View Post
Changed shoes
Decided to do all gloss black fr5's
What did you change from?
__________________
03 TR Mach 1
-Offroad X pipe
-Borla Stingers
-K&N Intake
-Roys 3/8" spacer
-MGW
-SCT X3 w/ LaSota tune
-18" AFS Mach 1 reps wrapped in Neeto.

-4.10s and built rear in the works!
TRbetngu is offline   Reply With Quote
Old 03-14-2017, 04:00 PM   #1421
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 4,884
Re: The Wheel Pictures Thread

Black with Polished lip Cobra R's
Attached Thumbnails
IMG_1139.jpg  
__________________
JB

03 Torch Red Mach 1

Stainless Steel Systems Adrenaline Series
18x9 - Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
(installed by Pyle Bros)
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
jbrad88 is offline   Reply With Quote
Old 03-16-2017, 12:50 PM   #1422
311-420
M-112 Mach 1
 
311-420's Avatar
 
Join Date: Sep 2007
Location: DFW, TX
Posts: 6,514
Re: The Wheel Pictures Thread

Looks good JB! I've liked all the wheel setups you've ran. Hopefully you kept the magnums to switch back and forth between! TR gives so many wheel color/style options that look awesome.
__________________
04 Oxford White // 5spd, IUP
Eaton @ 6psi, Longtubes
Built/3.73 rear, TSM tune
452/409
311-420 is offline   Reply With Quote
Old 03-16-2017, 07:45 PM   #1423
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 4,884
Re: The Wheel Pictures Thread

Thanks for the comment. I guess with all the choices i cannot help myself.

decided this time to go back to 18x9's because of all the problems i was having cutting into the 285's on the 10's in the rear. Decided i did not want to modify the quarter lip on a car that had only 2513 in my color in 2003. It was much easier just to swap to a 18x9...(gutless i know...but...)

Actually, sold the magnums @ 3 years ago...we were in the process of designing a new one at the time (bad move on my part) but unfortunately that kinda fizzled out.

Try to do something new every time its time for a new set of tires...
__________________
JB

03 Torch Red Mach 1

Stainless Steel Systems Adrenaline Series
18x9 - Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
(installed by Pyle Bros)
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
jbrad88 is offline   Reply With Quote
Old 03-16-2017, 07:53 PM   #1424
jbrad88
Original Owner
 
jbrad88's Avatar
 
Join Date: Apr 2003
Location: Houston, Texas
Posts: 4,884
Re: The Wheel Pictures Thread

Also added these with the new wheels...
Attached Thumbnails
fullsizeoutput_d21.jpg   fullsizeoutput_d24.jpg  
__________________
JB

03 Torch Red Mach 1

Stainless Steel Systems Adrenaline Series
18x9 - Solid Gloss Black FR5's
Nitto 555 g2 275/35r18's
MGW Shifter With Mach1 Shift Knob
4.10's & 31 spline Mosers and 31 Spline Posi
(installed by Pyle Bros)
Steeda Sport Springs Tokiko Illuminas
J@M weight Jacker LCA's
J@M Rear UCA's
J@M Braided steel brake lines
jbrad88 is offline   Reply With Quote
Old 04-02-2017, 11:15 AM   #1425
UNLUCKIER
Registered User
 
UNLUCKIER's Avatar
 
Join Date: Aug 2005
Location: Odenton, MD
Posts: 463
Re: The Wheel Pictures Thread

New Wheels
Attached Thumbnails
IMG_3854.jpg  

Last edited by UNLUCKIER; 04-02-2017 at 11:19 AM. Reason: adding pic
UNLUCKIER is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:11 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<