2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Fluid Systems (coolant, oil, fuel)

Reply
 
Thread Tools Display Modes
Old 03-02-2007, 04:56 PM   #1
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Thumbs up Part number for coolant crossover plug

Well as usual the Ford stealership can not find the part or part number for the bleeder/fill cap. Can anyone help with a ford part number for this thing??
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Old 03-02-2007, 05:35 PM   #2
DTMach1
semi-pro moderator
 
DTMach1's Avatar
 
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
Re: Part number help

you may have to get the whole cross-over tube
__________________

2004 Mach 1
IUP/5spd/DSG
Engine, etc done...sits in the garage
DTMach1 is offline   Reply With Quote
Old 03-02-2007, 06:03 PM   #3
2k4mach
LuLz
 
2k4mach's Avatar
 
Join Date: Dec 2003
Location: Cedar Park, TX
Posts: 19,294
Re: Part number help

I came up empty when i went to get a new 1 as well, my dealer finally found it but they showed no part # for it.
__________________
11 Sterling gray GT500 coupe
08 Silver Z06 1058rwhp/1073rwt @ 15psi
14 Silver Q50S Vortech blown
04 DSG Mach 1 (stolen)
03 OW Mach 1 (sitting in a field rotting away)
2k4mach is offline   Reply With Quote
Old 03-02-2007, 07:57 PM   #4
birdman941
Torque wins!
 
birdman941's Avatar
 
Join Date: Dec 2004
Location: Florida
Posts: 13,167
Re: Part number help

It IS available last I checked.
I will have to call local dealer tomorrow and see if it still is.
__________________
The ORIGINAL Project R build thread is back !

5.4 32V NA
Streetable 404/387 26.56 MPG


"I don't like repeat offenders,
I like DEAD offenders" Ted Nugent

"A big engine hardly working is more efficient
than a little engine screaming its head off" Jay Leno
birdman941 is offline   Reply With Quote
Old 03-02-2007, 10:13 PM   #5
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Re: Part number help

Quote:
Originally Posted by birdman941 View Post
It IS available last I checked.
I will have to call local dealer tomorrow and see if it still is.
Thanks.
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Old 03-03-2007, 05:05 AM   #6
dj33
Registered User
 
Join Date: Mar 2004
Location: Acton, Ma
Posts: 190
Re: Part number help

Part # for cross over plug:

F3LY8A500-A

None listed for the Mach 1, this fits the Mark 8 and Mach 1..

They are about 20$ Randy Stinchcomb over on Modular Depot Forums may be able to hook you up for a bit less.
__________________
2004 Mach 1
Azure Blue
Automatic
12.06 1/4
7.640 1/8
1.645 60 ft
112.34 mph
New England Dragway Modified # 713

Special Thanks to Mike Dez Racing and
Tube Chassis Designz
dj33 is offline   Reply With Quote
Old 03-03-2007, 06:40 AM   #7
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Re: Part number help

Quote:
Originally Posted by dj33 View Post
Part # for cross over plug:

F3LY8A500-A

None listed for the Mach 1, this fits the Mark 8 and Mach 1..

They are about 20$ Randy Stinchcomb over on Modular Depot Forums may be able to hook you up for a bit less.
Thanks!!!!

Like I said M1R ROCKS!!!!
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Old 03-03-2007, 06:58 AM   #8
hawk
Braderunna
 
hawk's Avatar
 
Join Date: May 2004
Location: hampton, va
Posts: 4,949
Re: Part number help

This info needs to stay on top.
__________________
"Sparky"- 2003 Azure Blue w/MT and IUP

Visit my garage on mach1mustang.org for details.
hawk is offline   Reply With Quote
Old 03-03-2007, 07:49 AM   #9
Angus66
1/4 Mile Drags Moderator
 
Angus66's Avatar
 
Join Date: Aug 2003
Location: Guntersville, AL
Posts: 2,630
Re: Part number help

Quote:
Originally Posted by dj33 View Post
Part # for cross over plug:

F3LY8A500-A

None listed for the Mach 1, this fits the Mark 8 and Mach 1..

They are about 20$ Randy Stinchcomb over on Modular Depot Forums may be able to hook you up for a bit less.
That's who I got mine from when I needed a replacement.

You may also want to consider this plug if you need to hook-up an aftermarket temp gauge:



More info on that part can be found HERE.
Angus66 is offline   Reply With Quote
Old 03-03-2007, 08:03 AM   #10
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Re: Part number help

Quote:
Originally Posted by Angus66 View Post
That's who I got mine from when I needed a replacement.

You may also want to consider this plug if you need to hook-up an aftermarket temp gauge:



More info on that part can be found HERE.
So where did you get that??? So the sensor for a cockpit temp guage would go in there?
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Old 03-03-2007, 08:05 AM   #11
Angus66
1/4 Mile Drags Moderator
 
Angus66's Avatar
 
Join Date: Aug 2003
Location: Guntersville, AL
Posts: 2,630
Re: Part number help

Quote:
Originally Posted by 03Mach150BP View Post
So where did you get that???
I posted a link in my original reply.

Quote:
Originally Posted by 03Mach150BP View Post
So the sensor for a cockpit temp guage would go in there?
Yes, that's where the sensor would go.
Angus66 is offline   Reply With Quote
Old 03-03-2007, 08:40 AM   #12
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: Part number help

Quote:
Originally Posted by Angus66 View Post
I posted a link in my original reply.



Yes, that's where the sensor would go.
angus, what sensor did you go with...I have the FORD autometer one and it WONT work with the end...way to large
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 03-03-2007, 09:48 AM   #13
birdman941
Torque wins!
 
birdman941's Avatar
 
Join Date: Dec 2004
Location: Florida
Posts: 13,167
Re: Part number for coolant crossover plug

Well, that saved me a call.
Why not get it from Joe Charles?
__________________
The ORIGINAL Project R build thread is back !

5.4 32V NA
Streetable 404/387 26.56 MPG


"I don't like repeat offenders,
I like DEAD offenders" Ted Nugent

"A big engine hardly working is more efficient
than a little engine screaming its head off" Jay Leno
birdman941 is offline   Reply With Quote
Old 03-04-2007, 09:19 AM   #14
InDShadow
Registered User
 
InDShadow's Avatar
 
Join Date: Dec 2003
Location: Summerville, SC
Posts: 456
Re: Part number help

Quote:
Originally Posted by Angus66 View Post
That's who I got mine from when I needed a replacement.

You may also want to consider this plug if you need to hook-up an aftermarket temp gauge:



More info on that part can be found HERE.
We need him to post over here and possibly get orders. I tried to contact him on svtperformance. Apparently since I haven't been on svtperformance in a year they deactivated my account.

I noticed he has other parts of interset too at good prices.
__________________
Horsepower is how fast you hit the wall, Torque is how far the wall moves.
*****************
'04 DSG Mach w/ IUP * * * SOLD * * * 5-9-07
*****************
Born on Date: 10/09/2003
InDShadow is offline   Reply With Quote
Old 03-04-2007, 10:49 AM   #15
G
Undocumented Member
 
G's Avatar
 
Join Date: Feb 2004
Location: Enterprise, AL
Posts: 15,828
Re: Part number for coolant crossover plug

When I screwed mine up I went to my dealer expecting to order or come up empty and he said "I have two".

I bought both, used one and put the other one someplace safe. Now I wish that place I thought was so safe was easy to remember. I have the receipt with the extra plug but the parts guy didn't look it up, he just walked right to it.

I have my water temp in the block drain now but if those crossover tube sender adapters are available again, I'm getting one. It's kind of hot for the wiring using the block drain.
__________________
_____________________________________________
2003 Mach1 AB 5spd
2004 Mach1 TR 5spd (sold)
1933 Ford 3W Coupe (4.6 dohc Stack Injection)
2003 Cobra TR (sold)
2014 Mustang GT (Track Pack) in Black
G is offline   Reply With Quote
Old 03-05-2007, 08:38 AM   #16
99cobra2881
Registered User
 
Join Date: Mar 2007
Location: Lincoln, Kansas
Posts: 15
Re: Part number for coolant crossover plug

Geoffav,
Posted over on SVTperformance.com and asked if I could come over and post up some info about my temp adapter.

Temp adapter I sell is priced at $20 shipped. I also build them as a standard replacement for the stock plug, these have no hole drilled/tapped for a temp sender. Same price as the tapped plug because if you ever do decide to install a temp sender ship the plug back to me and Ill drill/tap the plug for free.

I accept Paypal mpp97sst@hotmail.com
and
Check or Money Order

Anthony Dail
111 E. South St.
Lincoln, Ks 67455

If you have any questions please ask here or give me a call.

Thank you,
Anthony Dail
Midcontinent Mustangs
(785)658-5921
99cobra2881 is offline   Reply With Quote
Old 03-05-2007, 12:32 PM   #17
InDShadow
Registered User
 
InDShadow's Avatar
 
Join Date: Dec 2003
Location: Summerville, SC
Posts: 456
Re: Part number for coolant crossover plug

Thanks for coming over and posting.

I tried to contact you on SVTPerformance... and oh well that didn't work out to good...lol. Looks like a great product and you have had many great reviews of it over there too. There will be a paypal order today shortly..

Question first: If I order the plug tapped for the temp sensor, could I just install a std plug where the future temp sensor would go? Then replace the plug when a temp sensor is in need of being installed.

Thanks again!

:HOPPY:
__________________
Horsepower is how fast you hit the wall, Torque is how far the wall moves.
*****************
'04 DSG Mach w/ IUP * * * SOLD * * * 5-9-07
*****************
Born on Date: 10/09/2003
InDShadow is offline   Reply With Quote
Old 03-06-2007, 01:06 AM   #18
G
Undocumented Member
 
G's Avatar
 
Join Date: Feb 2004
Location: Enterprise, AL
Posts: 15,828
Re: Part number for coolant crossover plug

Quote:
Originally Posted by 99cobra2881 View Post
Geoffav,
Posted over on SVTperformance.com and asked if I could come over and post up some info about my temp adapter.

Temp adapter I sell is priced at $20 shipped. I also build them as a standard replacement for the stock plug, these have no hole drilled/tapped for a temp sender. Same price as the tapped plug because if you ever do decide to install a temp sender ship the plug back to me and Ill drill/tap the plug for free.

I accept Paypal mpp97sst@hotmail.com
and
Check or Money Order

Anthony Dail
111 E. South St.
Lincoln, Ks 67455

If you have any questions please ask here or give me a call.

Thank you,
Anthony Dail
Midcontinent Mustangs
(785)658-5921
Anthony

Welcome to the herd.

I just sent a paypal to you for a temp adapter. Thanks for stopping in. :ORANGE:
__________________
_____________________________________________
2003 Mach1 AB 5spd
2004 Mach1 TR 5spd (sold)
1933 Ford 3W Coupe (4.6 dohc Stack Injection)
2003 Cobra TR (sold)
2014 Mustang GT (Track Pack) in Black
G is offline   Reply With Quote
Old 03-06-2007, 05:31 AM   #19
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Re: Part number for coolant crossover plug

Quote:
Originally Posted by 99cobra2881 View Post
Geoffav,
Posted over on SVTperformance.com and asked if I could come over and post up some info about my temp adapter.

Temp adapter I sell is priced at $20 shipped. I also build them as a standard replacement for the stock plug, these have no hole drilled/tapped for a temp sender. Same price as the tapped plug because if you ever do decide to install a temp sender ship the plug back to me and Ill drill/tap the plug for free.

I accept Paypal mpp97sst@hotmail.com
and
Check or Money Order

Anthony Dail
111 E. South St.
Lincoln, Ks 67455

If you have any questions please ask here or give me a call.

Thank you,
Anthony Dail
Midcontinent Mustangs
(785)658-5921
Paypal just sent for the untaped plug. Thanks for posting
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Old 03-06-2007, 07:26 AM   #20
InDShadow
Registered User
 
InDShadow's Avatar
 
Join Date: Dec 2003
Location: Summerville, SC
Posts: 456
Re: Part number for coolant crossover plug

Paypal sent too! Thanks Again!

Now to take a closer look at the brake ducting.
__________________
Horsepower is how fast you hit the wall, Torque is how far the wall moves.
*****************
'04 DSG Mach w/ IUP * * * SOLD * * * 5-9-07
*****************
Born on Date: 10/09/2003
InDShadow is offline   Reply With Quote
Old 03-06-2007, 08:37 AM   #21
99cobra2881
Registered User
 
Join Date: Mar 2007
Location: Lincoln, Kansas
Posts: 15
Re: Part number for coolant crossover plug

Thank you for your orders. I'll get started on them today and I'll post back up when they ship.

Anthony Dail
Midcontinent Mustangs
(785)658-5921
99cobra2881 is offline   Reply With Quote
Old 03-09-2007, 06:18 PM   #22
99cobra2881
Registered User
 
Join Date: Mar 2007
Location: Lincoln, Kansas
Posts: 15
Re: Part number for coolant crossover plug

Shipped!!! All three orders went out today USPS Priority Mail. You should all get them by Monday or Tuesday at the latest.

Anthony
99cobra2881 is offline   Reply With Quote
Old 03-09-2007, 07:02 PM   #23
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Re: Part number for coolant crossover plug

I got mine today!!!!!!!!!!!!!!!!!!!!!!
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Old 03-09-2007, 08:05 PM   #24
hawk
Braderunna
 
hawk's Avatar
 
Join Date: May 2004
Location: hampton, va
Posts: 4,949
Re: Part number for coolant crossover plug

Paypal sent! Thanks Anthony!
__________________
"Sparky"- 2003 Azure Blue w/MT and IUP

Visit my garage on mach1mustang.org for details.
hawk is offline   Reply With Quote
Old 03-09-2007, 08:08 PM   #25
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Re: Part number for coolant crossover plug

Quote:
Originally Posted by hawkpilot View Post
Paypal sent! Thanks Anthony!
So I guess you don't want my stock plug now. If not I am taking outside and beating the crap out of it with a hammer.

Did you get the tapped or untapped version? It is a high quality peice.
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:08 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<