OK Shakers now on central area forum - Page 2 - 2003-04 Mach 1 Registry Owners Club

Mister L · 05-20-2010, 09:27 AM

Definitely need a G-T-G as soon as the weather permits. I miss everyone!

OKMach1 · 07-17-2010, 11:32 PM

It's been a while since I checked in here...hope everyone is doing OK. It's hot and humid as @&%# down here in Midland...almost makes me think I'm back in Oklahoma. I've been busy with work and the new project...another Mustang, LOL. Building this one up for our local TT5 association. Just got it out of paint and got my intake for the 434 SBF going into it back from Monte Smith this week. Now it's time to put everything together. I hope to bring it up to TVRP or TRP later this year.

Kevin

White2003Mach1 · 07-17-2010, 11:41 PM

looks good kevin
hows the mach1 coming ? did you get the tune you wanted ?

OKMach1 · 07-18-2010, 12:03 AM

Quote:

Originally Posted by White2003Mach1

looks good kevin
hows the mach1 coming ? did you get the tune you wanted ?

I've got a Mach 1????? Oh yeah, that's right...I do remember seeing it on my insurance bills and I get a tag notice every year in September. It's still at the shop in Tulsa. If I wasn't out of places to store/work on my cars down here, I think I'd go get it and finish it up myself. At least it will be low mileage when I do get it. How's your '69 coming along Rex? Have you been able to make any progress on it? It'd be nice to see it prowling the streets again.

Kevin

White2003Mach1 · 07-18-2010, 02:05 PM

it's been too hot to do much on it right now(especially after working in the heat all day)
it's completely gutted , but still on all four wheels for now
i've got the SFC built and installed and am working on adding some attachment points for a roll bar( if i decide to put one in), i'm going to reinforce the front and rear torque box areas as well as doing the shocktower mod for some extra room, i'm also going to cut and lower the dr. side seat riser to give me a little more head room

i've gotten pretty good with the spotweld drillbit

all the new floorpan sheetmetal has been sandblated and a good primer sprayed on, the old pass. side floorboard is cut out and waiting for the final trimming of the mating areas, then i can start fitting and welding on that
it doesn't sound like a whole lot of work ,but i'm trying to save as much of the original car while removing the rusted areas, so i'm taking my time and being as surgical as possible

05-20-2010, 09:27 AM	#26
Mister L Don't squeeze the Charmin Join Date: Sep 2003 Location: OKC, OK Posts: 1,036	Re: OK Shakers now on central area forum Definitely need a G-T-G as soon as the weather permits. I miss everyone! __________________ Mister L 03 Black 6-speed

07-17-2010, 11:32 PM	#27
OKMach1 Registered User Join Date: Jan 2004 Location: Cushing, OK Posts: 565	Re: OK Shakers now on central area forum It's been a while since I checked in here...hope everyone is doing OK. It's hot and humid as @&%# down here in Midland...almost makes me think I'm back in Oklahoma. I've been busy with work and the new project...another Mustang, LOL. Building this one up for our local TT5 association. Just got it out of paint and got my intake for the 434 SBF going into it back from Monte Smith this week. Now it's time to put everything together. I hope to bring it up to TVRP or TRP later this year. Kevin Attached Thumbnails __________________ OKMach1

07-17-2010, 11:41 PM	#28
White2003Mach1 Registered User Join Date: May 2003 Location: midwest city,Ok Posts: 1,666	Re: OK Shakers now on central area forum looks good kevin hows the mach1 coming ? did you get the tune you wanted ? __________________ Rex Schuler '03 white Mach1-- born date 3/31/03 serial # 3243 bought on 4/19/03 personalized tag "MYSTANG"

07-18-2010, 02:05 PM	#30
White2003Mach1 Registered User Join Date: May 2003 Location: midwest city,Ok Posts: 1,666	Re: OK Shakers now on central area forum it's been too hot to do much on it right now(especially after working in the heat all day) it's completely gutted , but still on all four wheels for now i've got the SFC built and installed and am working on adding some attachment points for a roll bar( if i decide to put one in), i'm going to reinforce the front and rear torque box areas as well as doing the shocktower mod for some extra room, i'm also going to cut and lower the dr. side seat riser to give me a little more head room i've gotten pretty good with the spotweld drillbit all the new floorpan sheetmetal has been sandblated and a good primer sprayed on, the old pass. side floorboard is cut out and waiting for the final trimming of the mating areas, then i can start fitting and welding on that it doesn't sound like a whole lot of work ,but i'm trying to save as much of the original car while removing the rusted areas, so i'm taking my time and being as surgical as possible __________________ Rex Schuler '03 white Mach1-- born date 3/31/03 serial # 3243 bought on 4/19/03 personalized tag "MYSTANG"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)