Eaton Swap..... - Page 2 - 2003-04 Mach 1 Registry Owners Club

wutang61 · 11-17-2007, 02:38 AM

i started tonight! heres my 1st night progress!

machgsxr · 11-17-2007, 12:01 PM

I will try and go back later and label exactly what everything is.

1. Upper alternator bracket (10A313) Part #: 2R3Z-10A313-AB List price: $172.64 Cost: $77.69

2. Lower alternator bracket (10153) Part #: 2R3Z-10153-BA List Price: $54.09 Cost: $24.34

3. Lower pulley or crankshaft pulley (6312) Part #: 2R3Z-6312-BA List price: $801.67 Cost: $481.00

4. Alternator (10346) Part #: 2R3Z-10346-BA List: $293.52 Cost: $176.11

5. Coolant crossover (8548) Part #: 2R3Z-8548-AA List price: $135.80 Cost: $61.11

machgsxr · 11-17-2007, 12:02 PM

Some more parts.

6. Egr (9D475) Part #: XW4Z-9D475-AB List price: $107.09 Cost: $48.19
egr tube(9D477) Part #: 2R3Z-9D477-AD List price: $62.32 Cost: $37.39 w/ hoses(9P761A & 9P761B) that go to the sensor

7. Coolant Hose (8A593) Part #: 2R3Z-8A593-AB List: $40.87 Cost: $18.39

8. Pulley bridge w/ idlers and tensioner (6B209B) Part #: 2R3Z-6B209-BC List: $382.55 Cost: $229.53

9. I/C pump(8501) Part #: F8YZ-8501-AA List: $403.70 Cost: $201.85
bracket(8N500) Part #: 2R3Z-8N500-AC List: $86.50 Cost: $51.90
w/ hose (9L443C) Part #: 2R3Z-9L443-CA List: $22.16 Cost: $9.97

10. Pulley (8678A) Part #: 2R3Z-8678-BA List: $133.47 Cost: $80.08

machgsxr · 11-17-2007, 12:02 PM

Some more..............

11. Coolant hose

12. Heat exchanger lines and hose Part #: 2R3Z-9N491-CA List: $84.77 Cost: $50.86 (9H08 in Ford catalog pic)

13. Intake tube Part #: 2R3Z-B659-BA List:$90.80 Cost: $54.48

14. PCV tubing. One side plugs into the back of the s/c and the other side connects to a tube that goes into the drivers side head.

15. Cobra crank pulley(6312)

machgsxr · 11-17-2007, 12:03 PM

Some more parts

16. i/c hose that goes from hard line to hard line. (9L443C)

17. Bracket (9J432), w/ (9H465), w/ (9J459), w/ (9J460)

18. I/c resevoir (8A080B) w/ hose (9L443A)

19. Cobra oil cooler adapter (6881) (Not seen, but attached to the backside of the cooler Cobra Oil cooler (6A642)

20. Crank pulley /Harmonic Balancer (6312) & Tensioner on timing cover (6B209A) & Timing cover (6D080)

machgsxr · 11-17-2007, 12:03 PM

More parts....

21. Heat exchanger tubing (9H308) Part #: 2R3Z-9N491-CA List: $84.77 Cost: $50.86 with soft lines.
1 goes to the i/c resevoir and the other goes to the intake to i/c adapter (9L443B).

22. heat exchanger (8K226) Part #: 2R3Z-8K226-AA List: $760.63 Cost: $456.38

23. Plenum (9A589) Part #: 2R3Z-9A589-CA List: $517.82 Cost: $258.91
Iac (9F715) Part #: 2R3Z-9F715-AB List: $84.70 Cost: $42.35
T/B (9E926) Part #: 2R3Z-9E926-AAA List: $236.74 Cost: $118.37

24. Heat exchanger tubing (9N491A) Part #: 2R3Z-9N491-DA List: $98.15 Cost: $58.89
w/ soft lines (9L443F) Part #: 2R3Z-9L443-FA List: $15.02 Cost: $6.76
(9L443G) Part #: 2R3Z-9L443-GA List: $15.02 Cost: $6.76

25. Heat exchanger brackets (8A193) Part #: 2R3Z-8A193-AA List: $207.48 Cost: $124.49.
One side of them. Im missing the other 2 but will have them shortly.

machgsxr · 11-17-2007, 12:04 PM

Some more.

26. Lower intake to intercooler adapter. (9N491B)

27. Timing cover gaskets(6020)

28. Plenum to s/c gasket(9L437)

29. S/C to lower intake gasket(9H486)

30. Harmonic balancer bolt(6A340) & washer(6378)

machgsxr · 11-17-2007, 12:04 PM

More...

machgsxr · 11-17-2007, 12:05 PM

ph8

machgsxr · 11-17-2007, 12:24 PM

Ph9

Reloaded · 11-20-2007, 04:53 PM

What's the PH7 PH8 PH9 on those last few posts?

machgsxr · 11-20-2007, 04:54 PM

Quote:

Originally Posted by Reloaded

What's the PH7 PH8 PH9 on those last few posts?

Place holders for more pics. My puter at home is not picking up internet so I have not been able to post them. I will shortly though.

wutang61 · 11-20-2007, 07:27 PM

thx allot for doing this guys this will help out big time when i start bolting parts on!

Devery · 11-21-2007, 01:47 AM

Quote:

Originally Posted by wutang61

thx allot for doing this guys this will help out big time when i start bolting parts on!

X2...Thxs in advance!

wutang61 · 11-21-2007, 12:32 PM

i took a lil mock up shot wit the eaton... looks BA.

Reloaded · 11-21-2007, 12:59 PM

Oh snap!! NICE!! Mm mm lookin' good.

Nor Cal Mach · 11-21-2007, 01:10 PM

I think it would look hella cool if the blower was tall enough to poke out of our hoods like the shaker does,

Reloaded · 11-21-2007, 02:21 PM

HOSE!

machgsxr · 11-21-2007, 02:33 PM

Jeff,

In pic 15 that I posted on this page that tubing comes out from underneath the lower intake. Can you tell me where those two go so I can label it.

Reloaded · 11-21-2007, 02:38 PM

That look right?

machgsxr · 11-21-2007, 03:02 PM

Neither one of those look like it.

Here's a pic of where it mounts.

http://img134.imageshack.us/img134/7...swap034gm4.jpg

Reloaded · 11-21-2007, 03:12 PM

Quote:

Originally Posted by machgsxr

Neither one of those look like it.

Here's a pic of where it mounts.

http://img134.imageshack.us/img134/7...swap034gm4.jpg

Odd... I can't find that sh** anywhere in the catalog. I see the nipple that mounts to the bottom of the intake manifold in the pic of the supercharger and the lower manifold. I don't see a hose....

JDLM · 11-21-2007, 03:21 PM

Awesome progress pics

machgsxr · 11-21-2007, 03:40 PM

Quote:

Originally Posted by Reloaded

Odd... I can't find that sh** anywhere in the catalog. I see the nipple that mounts to the bottom of the intake manifold in the pic of the supercharger and the lower manifold. I don't see a hose....

I'm thinking it's for the pcv deal... Not 100% sure though.

Reloaded · 11-21-2007, 03:44 PM

That probably sounds about right. You may be able to fab up the hose itself.. This is the only EGR/PCV stuff I can find for the Cobra

11-17-2007, 02:38 AM	#26
wutang61 CAT MASTA! Join Date: Jun 2007 Location: Vero Beach, Florida Posts: 3,405	Re: Eaton Swap..... i started tonight! heres my 1st night progress! Attached Thumbnails __________________ 04' Torched *6-speed* Build Date: 02/25/2004 Ported Eaton @7psi Viper T-56 Built 8.8,4.10's 441/402

11-17-2007, 12:01 PM	#27
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... I will try and go back later and label exactly what everything is. 1. Upper alternator bracket (10A313) Part #: 2R3Z-10A313-AB List price: $172.64 Cost: $77.69 2. Lower alternator bracket (10153) Part #: 2R3Z-10153-BA List Price: $54.09 Cost: $24.34 3. Lower pulley or crankshaft pulley (6312) Part #: 2R3Z-6312-BA List price: $801.67 Cost: $481.00 4. Alternator (10346) Part #: 2R3Z-10346-BA List: $293.52 Cost: $176.11 5. Coolant crossover (8548) Part #: 2R3Z-8548-AA List price: $135.80 Cost: $61.11 Attached Thumbnails Last edited by machgsxr; 12-05-2007 at 03:48 PM.

11-17-2007, 12:02 PM	#28
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... Some more parts. 6. Egr (9D475) Part #: XW4Z-9D475-AB List price: $107.09 Cost: $48.19 egr tube(9D477) Part #: 2R3Z-9D477-AD List price: $62.32 Cost: $37.39 w/ hoses(9P761A & 9P761B) that go to the sensor 7. Coolant Hose (8A593) Part #: 2R3Z-8A593-AB List: $40.87 Cost: $18.39 8. Pulley bridge w/ idlers and tensioner (6B209B) Part #: 2R3Z-6B209-BC List: $382.55 Cost: $229.53 9. I/C pump(8501) Part #: F8YZ-8501-AA List: $403.70 Cost: $201.85 bracket(8N500) Part #: 2R3Z-8N500-AC List: $86.50 Cost: $51.90 w/ hose (9L443C) Part #: 2R3Z-9L443-CA List: $22.16 Cost: $9.97 10. Pulley (8678A) Part #: 2R3Z-8678-BA List: $133.47 Cost: $80.08 Attached Thumbnails Last edited by machgsxr; 12-05-2007 at 03:45 PM.

11-17-2007, 12:02 PM	#29
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... Some more.............. 11. Coolant hose 12. Heat exchanger lines and hose Part #: 2R3Z-9N491-CA List: $84.77 Cost: $50.86 (9H08 in Ford catalog pic) 13. Intake tube Part #: 2R3Z-B659-BA List:$90.80 Cost: $54.48 14. PCV tubing. One side plugs into the back of the s/c and the other side connects to a tube that goes into the drivers side head. 15. Cobra crank pulley(6312) Attached Thumbnails Last edited by machgsxr; 12-08-2007 at 09:28 PM.

11-17-2007, 12:03 PM	#30
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... Some more parts 16. i/c hose that goes from hard line to hard line. (9L443C) 17. Bracket (9J432), w/ (9H465), w/ (9J459), w/ (9J460) 18. I/c resevoir (8A080B) w/ hose (9L443A) 19. Cobra oil cooler adapter (6881) (Not seen, but attached to the backside of the cooler Cobra Oil cooler (6A642) 20. Crank pulley /Harmonic Balancer (6312) & Tensioner on timing cover (6B209A) & Timing cover (6D080) Attached Thumbnails Last edited by machgsxr; 03-30-2008 at 10:17 PM.

11-17-2007, 12:03 PM	#31
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... More parts.... 21. Heat exchanger tubing (9H308) Part #: 2R3Z-9N491-CA List: $84.77 Cost: $50.86 with soft lines. 1 goes to the i/c resevoir and the other goes to the intake to i/c adapter (9L443B). 22. heat exchanger (8K226) Part #: 2R3Z-8K226-AA List: $760.63 Cost: $456.38 23. Plenum (9A589) Part #: 2R3Z-9A589-CA List: $517.82 Cost: $258.91 Iac (9F715) Part #: 2R3Z-9F715-AB List: $84.70 Cost: $42.35 T/B (9E926) Part #: 2R3Z-9E926-AAA List: $236.74 Cost: $118.37 24. Heat exchanger tubing (9N491A) Part #: 2R3Z-9N491-DA List: $98.15 Cost: $58.89 w/ soft lines (9L443F) Part #: 2R3Z-9L443-FA List: $15.02 Cost: $6.76 (9L443G) Part #: 2R3Z-9L443-GA List: $15.02 Cost: $6.76 25. Heat exchanger brackets (8A193) Part #: 2R3Z-8A193-AA List: $207.48 Cost: $124.49. One side of them. Im missing the other 2 but will have them shortly. Attached Thumbnails Last edited by machgsxr; 12-06-2007 at 08:20 PM.

11-17-2007, 12:04 PM	#32
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... Some more. 26. Lower intake to intercooler adapter. (9N491B) 27. Timing cover gaskets(6020) 28. Plenum to s/c gasket(9L437) 29. S/C to lower intake gasket(9H486) 30. Harmonic balancer bolt(6A340) & washer(6378) Attached Thumbnails Last edited by machgsxr; 12-08-2007 at 09:46 PM.

11-17-2007, 12:04 PM	#33
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... More... Attached Thumbnails Last edited by machgsxr; 11-20-2007 at 11:33 PM.

11-17-2007, 12:05 PM	#34
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... ph8

11-17-2007, 12:24 PM	#35
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... Ph9

11-20-2007, 07:27 PM	#38
wutang61 CAT MASTA! Join Date: Jun 2007 Location: Vero Beach, Florida Posts: 3,405	Re: Eaton Swap..... thx allot for doing this guys this will help out big time when i start bolting parts on! __________________ 04' Torched *6-speed* Build Date: 02/25/2004 Ported Eaton @7psi Viper T-56 Built 8.8,4.10's 441/402

11-21-2007, 12:32 PM	#40
wutang61 CAT MASTA! Join Date: Jun 2007 Location: Vero Beach, Florida Posts: 3,405	Re: Eaton Swap..... i took a lil mock up shot wit the eaton... looks BA. __________________ 04' Torched *6-speed* Build Date: 02/25/2004 Ported Eaton @7psi Viper T-56 Built 8.8,4.10's 441/402

11-21-2007, 01:10 PM	#42
Nor Cal Mach Mach-O-Haulic Join Date: Sep 2007 Posts: 716	Re: Eaton Swap..... I think it would look hella cool if the blower was tall enough to poke out of our hoods like the shaker does,

11-21-2007, 02:33 PM	#44
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... Jeff, In pic 15 that I posted on this page that tubing comes out from underneath the lower intake. Can you tell me where those two go so I can label it.

11-21-2007, 03:02 PM	#46
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: Eaton Swap..... Neither one of those look like it. Here's a pic of where it mounts. http://img134.imageshack.us/img134/7...swap034gm4.jpg

11-21-2007, 03:21 PM	#48
JDLM Guest Join Date: Mar 2006 Location: Iraq Posts: 1,226	Re: Eaton Swap..... Awesome progress pics

Currently Active Users Viewing This Thread: 4 (0 members and 4 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode