2003-04 Mach 1 Registry Owners Club  

Best Mustang Parts

Go Back   2003-04 Mach 1 Registry Owners Club > General Discussions > General Registry Discussion

General Registry Discussion Topics of Interest (Mach 1 Related or otherwise) for discussions that don't fit other forums.

Reply
 
Thread Tools Display Modes
Old 05-03-2019, 01:27 AM   #1
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Mach ! Resurrection

So I recently purchased a Mach 1 roller with approx. 42xxx klms on the car, the car was with the previous owner since 2005....A turn of bad luck with a local speed shop left the car less a complete drive train....luckily the body and specific Mach stuff was all there....moving forward I have a complete drive train and suspension for the car...........so lets resurrect this bad boy!

I will update with pics as we go along...... need to upload them..lol

First I started by cleaning out the engine bay of the dirt as it sat for almost two years...... before this the car was garage kept and as you can see it amazing condition!
Click image for larger version

Name:	mach 1.jpg
Views:	43
Size:	85.5 KB
ID:	67190
Click image for larger version

Name:	mach 2.jpg
Views:	41
Size:	109.4 KB
ID:	67191
Here's the IRS that is going in the car.
Click image for larger version

Name:	mach 3.jpg
Views:	38
Size:	119.3 KB
ID:	67192
Click image for larger version

Name:	mach 4.jpg
Views:	38
Size:	109.4 KB
ID:	67194
Click image for larger version

Name:	mach 5.jpg
Views:	40
Size:	94.5 KB
ID:	67193
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500

Last edited by hotford; 05-03-2019 at 02:42 AM.
hotford is offline   Reply With Quote
Old 05-03-2019, 03:30 AM   #2
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

Click image for larger version

Name:	mach 6.jpg
Views:	31
Size:	88.0 KB
ID:	67195

Here's the motor with the front suspension ready for install, cobra motor with 2.9 whipple with crusher set up, 80 lbs , metco lower mid length headers,

Click image for larger version

Name:	mach 7.jpg
Views:	31
Size:	96.5 KB
ID:	67196

Yup its going auto!!, built 4R70W trans with circle D convertor

Click image for larger version

Name:	mach 8.jpg
Views:	30
Size:	71.2 KB
ID:	67197
sittin pretty waiting for the next step....lol

Click image for larger version

Name:	mach 9.jpg
Views:	28
Size:	71.7 KB
ID:	67198
Divison X hat with twin 465 walbros, yes return style...

Click image for larger version

Name:	mach 10.jpg
Views:	28
Size:	76.7 KB
ID:	67199
IRS installed along with the tank and fuel lines.....
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 05-03-2019, 10:15 AM   #3
311-420
#6956
 
311-420's Avatar
 
Join Date: Sep 2007
Location: +♤$
Posts: 6,832
Re: Mach ! Resurrection

Coming right along. How's the interior?
__________________
2004 Oxford White
5spd IUP Eaton
452/409
311-420 is offline   Reply With Quote
Old 05-03-2019, 12:45 PM   #4
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis/Brownsburg, IN
Posts: 2,250
Re: Mach ! Resurrection

Awesome! Got yourself a great project. I'd love an IRS lol. Also...always wondered where the horn was.
__________________
  • Azure Blue 04 Mach 1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 05-03-2019, 03:16 PM   #5
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,219
Re: Mach ! Resurrection

nice save! That should be a blast!
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 05-04-2019, 05:35 PM   #6
rcodemach1
Registered User
 
rcodemach1's Avatar
 
Join Date: Jan 2004
Location: san diego, ca
Posts: 1,458
Re: Mach ! Resurrection

Nice! Good luck.
__________________

'03 Mach, Oxford White, 5-spd, Eaton
'03 Mach, Black, automatic
'98 GT, 410w, C4, Vortech, 6.78 in 1/8 mile (on motor)

rcodemach1 is offline   Reply With Quote
Old 05-04-2019, 11:42 PM   #7
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 357
Sweet! Looks like fun!


Sent from my iPhone using Tapatalk
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is offline   Reply With Quote
Old 05-06-2019, 06:11 AM   #8
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

Quote:
Originally Posted by 311-420 View Post
Coming right along. How's the interior?
Interior is all inside the house.......once the car is done she'll go back in.
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 05-06-2019, 06:12 AM   #9
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

Quote:
Originally Posted by DSG2003Mach1 View Post
nice save! That should be a blast!
Thanks......save them not crush them I always say!!
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 05-06-2019, 06:26 AM   #10
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

So if any you have done the auto swap you"ll know that the floor is slightly different from the auto version, here's the additional trans tunnel that Ford installs as its need for the standard trans as it sits higher up.....drill the spot welds out and clean away the seem sealer and she come out, clean up the tunnel around the opening and used self edging primer to seal it up, gotta get the template made up for the auto and gonna weld her back in and paint Azura blue once in....here's what she looks like so far.

Click image for larger version

Name:	mach trans tunnel.jpg
Views:	26
Size:	90.6 KB
ID:	67200
Click image for larger version

Name:	inside mach.jpg
Views:	26
Size:	66.4 KB
ID:	67201
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 05-08-2019, 01:08 AM   #11
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

well started the temp plate for the floor for the auto shifter, I used a stainless steel plate and decided on using speed clip to secure it down, once the final shape was a nice tight over lay I used a paper temp plate from auto car to locate the hole for the auto shifter, test fit it first with the console and its a perfect match, remove the shift and seem sealed it, then placed the plate down and bolted in place, what ya see is the finished product.
only took me 4 hrs...lol
Click image for larger version

Name:	floor temp plate.jpg
Views:	22
Size:	56.6 KB
ID:	67204
Click image for larger version

Name:	shift mount.jpg
Views:	22
Size:	48.7 KB
ID:	67205
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 05-08-2019, 02:07 PM   #12
Jester
Super Moderator
 
Jester's Avatar
 
Join Date: Sep 2003
Location: Houston (Crosby), Texas
Posts: 6,686
Re: Mach ! Resurrection

Nice write up. I'll be following!
__________________
2003 Dark Shadow Gray Mach 1
5.3L Stroker - FR500 Intake - Boss330 Heads
4.56 Gears - Kooks LTs - SCT Tune - Bassani Catback


2004 Silver Metallic Cobra
2.9L Whipple - 60lb injectors -Twin FGT Pumps
8 gauge/BAP/FPDM - JLT - Bassani Catted X
Bassani Catback - SCT PRP - 4# Lower - 3.50/3.00 Uppers - 19/24 PSI


2017 White Shelby F150
2.9L Whipple

_______________
Jester is offline   Reply With Quote
Old 05-10-2019, 12:53 AM   #13
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

well had a chance today to get about 4 hrs work done and installed the front suspension with motor and trans....she's coming along ok.......here's some shots..........
Click image for larger version

Name:	motor's in.jpg
Views:	20
Size:	99.4 KB
ID:	67206
Click image for larger version

Name:	motor top shot.jpg
Views:	20
Size:	99.2 KB
ID:	67207
Click image for larger version

Name:	motor is in 2.jpg
Views:	20
Size:	94.7 KB
ID:	67208
Click image for larger version

Name:	motor pic.jpg
Views:	21
Size:	87.3 KB
ID:	67209
Click image for larger version

Name:	motor pic 2.jpg
Views:	19
Size:	83.9 KB
ID:	67210

still need to button up the electrical, hydra boost lines cooling system.....etc..
feeling pretty good on how far its come in a short time....
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 05-11-2019, 10:12 AM   #14
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

Well another productive evening, installed the auto pedal, and shifter cable to the steering column, not as bad as I thought pretty easy just hard getting under the dash....lol, check and shifter works like OEM... d/s, hydra boost and all brakes lines attached and bleed, next up will be the front rad, condenser, trans cooler and killer chiller...... ILL update more pics as I go along.....
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 05-21-2019, 04:19 AM   #15
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

well waiting for the power distribution harness I purchased to arrive to complete the electrical, I decided to tackle the auto portion of the build, since I have a manual pcm harness I needed to intergrade the auto wires into the harness and into its pin locations into the factory connector at the pcm, I have a auto pcm just in case your wondering

Click image for larger version

Name:	mach harness mod.jpg
Views:	16
Size:	159.4 KB
ID:	67217

here's a pic of the Mid pipe I made for this set up a few years back as The haeders I'm running are mid length and required a custom one, believe it or not that mid pipe is two Dodge ram tail pipes modified...lol
Click image for larger version

Name:	mach Exhaust.jpg
Views:	16
Size:	191.6 KB
ID:	67218

Finally the car is off the hoist and I can finish off the wiring on ground level as all the underneath is complete.
those wheels are temporary as I have a set of 18X9 Mach wheels coming for it, think I might just have the rear widened to 10.5 from weld craft, just wanna see the turn around time..

Click image for larger version

Name:	mach pic's.jpg
Views:	17
Size:	233.2 KB
ID:	67219

Here a quick back shot....
Click image for larger version

Name:	mach rear pic.jpg
Views:	15
Size:	104.9 KB
ID:	67220
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 05-21-2019, 01:15 PM   #16
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis/Brownsburg, IN
Posts: 2,250
Re: Mach ! Resurrection

Custom midpipe looks good. I've always wondered that about certain manufacturers out there that sell 'mid length' headers. Always wondered if you had to buy the midpipe that THEY sell for it to work.
__________________
  • Azure Blue 04 Mach 1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 06-05-2019, 01:21 AM   #17
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

update
haven't had too much time lately but managed to get a little more progress
installed the trans cooler and lines, heat exchanger and killer chiller
Click image for larger version

Name:	mach-killer chiller.jpg
Views:	12
Size:	86.7 KB
ID:	67236
Click image for larger version

Name:	mach-killer chiller routing.jpg
Views:	9
Size:	63.0 KB
ID:	67237
Click image for larger version

Name:	mach heat exchanger.jpg
Views:	8
Size:	58.3 KB
ID:	67238
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 08-22-2019, 12:57 AM   #18
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

Click image for larger version

Name:	harness issues.jpg
Views:	11
Size:	54.9 KB
ID:	67282
So I had purchased a Auto Mach CCRM Harness which ended up being a GT one, today I got the right one, thank god...
I decided since Im waiting for the harness I put the interior back in......
I will update the harness pics, for now the new CCRM auto harness is in along with the engine auto harness and auto mach PCM..., since im running a 03 cobra distribution harness I have to move some wires around in the connectors, mainly the blue with orange tracer needs to get to the CCRM..
The Front seat is still out as I have new seat foam for the seat to install.
Also mocked up the PNR tank in the trunk, that's all wired and ready to go.
Click image for larger version

Name:	Interior coming together.jpg
Views:	12
Size:	44.2 KB
ID:	67283
Click image for larger version

Name:	Interior pic 2.jpg
Views:	13
Size:	43.1 KB
ID:	67284
Click image for larger version

Name:	Mach -pnr tank.jpg
Views:	16
Size:	52.5 KB
ID:	67285
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 08-28-2019, 11:46 AM   #19
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

well getting one step closer: needed to modify the distribution harness at the connectors on the passenger side that connect to the CCRM harness, since I used a Cobra distribution harness the power supply for the CCRM to FPDM( blue with orange tracer) is not in the 16 pin grey connector but is in the large round 4 pin connector on a cobra, Gt and Mach only use 3 of the 4, easy enough just added it, checked when done and we have fuel prime!

Click image for larger version

Name:	Modified connector for FPDM.jpg
Views:	9
Size:	85.7 KB
ID:	67291
Next was to check for crank, since this was a stick car and now and auto needed to verify all is good, went to crank and had nothing, closer look and the safety switch was in the clutch switch, but auto doesn't look at that, it looks at trans range selector, also the manual ccrm harness at the grey connector has a loop from white/pink and blur with red, on an auto these are not looped, but are suppose to under the dash on the drivers side left, is a harness that runs up and you will see the same colour wires with a open connector if it's stick, but auto has the wires looped, here's what the connectors needs to look like .

Click image for larger version

Name:	Trans jumper auto.jpg
Views:	9
Size:	87.2 KB
ID:	67290

Now that I have prime and crank, car is ready to fire up, just need to finsh off the harness connection to the circ pump and i'm going to run that to the cobra relay on the passenger fire wall via the grey connector and make it look all factory....more pics when that done....
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 08-28-2019, 12:27 PM   #20
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis/Brownsburg, IN
Posts: 2,250
Re: Mach ! Resurrection

Nice!
__________________
  • Azure Blue 04 Mach 1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 08-28-2019, 03:04 PM   #21
311-420
#6956
 
311-420's Avatar
 
Join Date: Sep 2007
Location: +♤$
Posts: 6,832
Re: Mach ! Resurrection

Your skills are impressive! This thing will be breaking hearts in no time.

Really like how you mounted the tank in the trunk. Very clean.
__________________
2004 Oxford White
5spd IUP Eaton
452/409
311-420 is offline   Reply With Quote
Old 08-29-2019, 07:55 AM   #22
hotford
Registered User
 
hotford's Avatar
 
Join Date: Jan 2005
Posts: 105
Re: Mach ! Resurrection

Quote:
Originally Posted by 311-420 View Post
Your skills are impressive! This thing will be breaking hearts in no time.

Really like how you mounted the tank in the trunk. Very clean.
Thanks!
__________________
1982 GT
2003 Mach 1
2003 Marauder
2011 Shelby GT 500
hotford is offline   Reply With Quote
Old 08-29-2019, 08:04 AM   #23
HAEG
Heppasketties
 
HAEG's Avatar
 
Join Date: Aug 2003
Location: Mercer County, NJ
Posts: 4,614
Re: Mach ! Resurrection

Nice work, nice write up. Waiting to see it running down the road once again.
__________________
M1R Member #1829
2011 Shelby GT-500 Grabber Blue
W/SVT Performance Package
Born on Friday, 6-25-2010
Purchased 8-19-2010

2003 Zinc Yellow Auto I/UP (Build #8280 of 9652)
Born on Thursday, 7/17/03
Purchased 8-18-2003 first owner
Sold 8-19-2010 bought GT500
Purchased again 3-3-2017 fifth owner
Purchased for my wife to drive (but she knows I love the car)
HAEG is offline   Reply With Quote
Old 08-29-2019, 11:19 AM   #24
FalkenXC
The Other Mach
 
Join Date: Mar 2019
Location: Southern KY
Posts: 15
Re: Mach ! Resurrection

This is sick man, please keep the photos and progress coming! Love it when people hot rod these things. Nice work!
__________________
-------------------------------------------
Instagram: @victorious_4v
/r/newedgemustang moderator
What I drive: 2004 Mach 1, black, built botttom end w/ pullied Eaton. DD 2003 Crown Victoria P71, also black
FalkenXC is offline   Reply With Quote
Old 09-01-2019, 10:12 AM   #25
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 357
Coming along nicely!


Sent from my iPhone using Tapatalk
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 12:11 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<