|
|
04-11-2018, 11:26 PM | #1 |
Registered User
Join Date: Apr 2018
Location: Grande Prairie, Alberta
Posts: 19
|
Need pics of eibach pro kit
Hey all.
Just need to see some pictures of any new edge cars with the eibach probkit. I wanted to order the Eibach sport kit but everywhere is out of stock. I’m getting mixed readings on how much it will lower it some sites say 0.8” other day 1.6”. Sooo there’s a bit of a gap haha. I have on order and on it’s way a set of 18x9/10 wheels and c&c plates coming because I wanted the Eibach sports but now they are out of stock. Any help would be appreciated. I should also say I’m open to other brands. I’m looking for the 1.75-1.25” Range. Low stance but not hammered to the ground. |
04-12-2018, 08:50 AM | #2 |
MECHANIC
Join Date: Jun 2012
Location: Morgantown, WV
Posts: 916
|
Re: Need pics of eibach pro kit
Don't waste your money, they are the same as one of the ford racing springs. I had the ford racing version and they are way too soft for these cars!!!
H&r race or super race are the way to go. The spring rate seems high but with the softer springs you end up riding the bump stops |
04-12-2018, 12:15 PM | #3 |
Registered User
Join Date: Jan 2018
Location: Central Kentucky
Posts: 161
|
Re: Need pics of eibach pro kit
I had the Eibach Sportline springs on my 2001 GT and I'll never do it again. The car looked great, but it had the ride quality of a tobacco wagon and it would bottom out on the rear bump stop every time I hit a dip in the road. If you drive your car regularly, I'd avoid them.
__________________
2003 Mach 1 - TR3650 - Mac O/R H-pipe - Ford Racing driveshaft - Modified air intake - Nitto Motivo 315/35s on 10.5" FR500 wheels - Steeda clutch adjuster |
04-12-2018, 01:33 PM | #4 |
2003 AB Mach 1
Join Date: Jul 2011
Location: SW Pennsylvania
Posts: 872
|
I have the eibach pro kit springs on the stock rubber isolators. I haven't noticed anything about them being soft. Car handles great and I'm still using the stock shocks and struts. I also didn't need caster camber plates or a bump steer kit. I didn't want my car slammed. I'd definitely buy them again.
Sent from my SM-G930V using Tapatalk |
04-12-2018, 11:45 PM | #5 | |
Registered User
Join Date: Jul 2004
Location: Raleigh , NC
Posts: 2,093
|
Re: Need pics of eibach pro kit
Quote:
__________________
2004 Torch Red Procharged Mach 1 |
|
04-30-2018, 07:32 PM | #6 | |
Registered User
Join Date: Jun 2015
Location: East haven ct
Posts: 36
|
Re: Need pics of eibach pro kit
Quote:
|
|
05-08-2018, 12:58 AM | #7 |
Registered User
Join Date: Apr 2018
Location: Grande Prairie, Alberta
Posts: 19
|
Re: Need pics of eibach pro kit
Thanks for all the opinions guys. I ended up going with the H&R supersports. I was hoping for a little firmer but these are supposed to be a bit firmer than the eibachs so I think we made a good choice. We got about 1.25-1.5” out of it. The wheels and it’s went on at the same time so I don’t really know but the stance is good.
|
04-15-2018, 01:45 PM | #8 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
I’ve always wondered..what’s the height difference between the Sportlines and the Pro Kit? I can’t really tell in the pics I’ve seen over the years.
IG: @ab_mach1
__________________
|
04-23-2018, 08:48 PM | #9 |
Registered User
Join Date: Jan 2004
Location: Grants Pass, Oregon
Posts: 1,777
|
Re: Need pics of eibach pro kit
Eiback Prokit Plus suspension on my SN95...dropped 1.5" all around.
__________________
I drive a slow Mustang....but I drive it Slow....HARD! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|