|
|
Photo Gallery | $ Donations $ | Register | FAQ | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
Technical Q&A. HOW TO's, TSB's & Warranty Items Have a Problem? Technical Questions & Answers. HOW TO's & TSB's, Warranty Issues |
|
Thread Tools | Display Modes |
07-16-2018, 09:32 AM | #1 |
Registered User
Join Date: May 2009
Location: NE OH
Posts: 21
|
P0465
03 mach. Basically stock. About 100k miles on it.
Code is defined as "Purge Flow Sensor Circuit Malfunction". I haven't noticed the car running any different aside from yesterday. I did a quick run up to 80 or so. I pushed in the clutch to slow down for the upcoming off-ramp, and upon applying the brakes, realized the car had died. Anyone dealt with this code before? Any idea where to start looking? Thanks in advance. |
07-16-2018, 10:00 AM | #2 |
Registered User
Join Date: Jun 2004
Location: Cape Coral, FL
Posts: 295
|
Re: P0465
I'm not sure about the code but my mach started to die when I came to a stop. Ended up replacing my IAC. Idle air control valve. Make sure you use genuine ford part, I tried knock off and same issue kept happening. Hope that helps.
__________________
John Cape Coral FL 04 Azure 5spd IUP JLT RAI. Borla Pro XS mufflers. Pro 5.0 Quick throw Mac Off Road H Pipe Forged bottom end Manely .20 over Flat top pistons 11.3 comp 297 hp and 320 torq at wheels. Full Steeda suspension with light weight K member and adjustable Qa1 struts and shocks. Stock front wheels and AFS 17x10.5 for rear, 315s. In the future = supercharger and AFS 18x9 and 18x10.5. |
07-16-2018, 10:56 AM | #3 |
Registered User
Join Date: May 2009
Location: NE OH
Posts: 21
|
Re: P0465
Thanks, Mason. I'll look into that. It looks like the code I'm pulling may be related to (or cause) a vacuum leak. If I get my issue fixed (looks like maybe just the sensor needs replaced), and its still wanting to stall when I push in the clutch, I'll look at that. Thanks
|
07-16-2018, 12:30 PM | #4 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Re: P0465
I can't even find P0465 in the list of codes for our cars..? Are you sure it wasn't P0456?
__________________
|
07-16-2018, 01:03 PM | #5 | |
Registered User
Join Date: May 2009
Location: NE OH
Posts: 21
|
Re: P0465
Quote:
https://lmr.com/products/Mustang-DTC...-SVT-Lightning The code is a generic one, like most codes, but it definitely applies. |
|
07-16-2018, 01:14 PM | #6 | |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Re: P0465
Quote:
__________________
|
|
07-16-2018, 01:24 PM | #7 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Re: P0465
It sounds like it has to do with the evap canister, either a problem with the vent solenoid or with the purge outlet tube. The evap canister is located on the drivers side in the rear behind the wheel. You can see it underneath, but you really need to remove the wheel to gain complete access.
__________________
|
07-16-2018, 03:28 PM | #8 |
Registered User
Join Date: May 2009
Location: NE OH
Posts: 21
|
Re: P0465
Thanks for the help, guys. It gives me a place to start.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|