|
|
Photo Gallery | $ Donations $ | Register | FAQ | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
05-28-2017, 09:11 AM | #1 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Little Project coming up
Well, I have reached the point as most of us do, where the Mach is old enough that its time to start doing some of the larger maintenance items.
I am attacking the suspension. Specifically the ball joints and tie rods. I have already purchased the complete front LCA assemblies from MOOG and the tie rods as well. Guess I am just looking for some thoughts and suggestions. I am going to go ahead and get some new ISO's for the front springs since they are coming out anyway when i remove the arms. Thinking of replacing the rack bushings while I am there since the rack has to be loosened to get to the inner LCA bolt. Springs are EIBACH pro's that have been in the car for 70k miles. I was thinking about replacing them, but can't convince myself that these things would be worn enough to worry about. In the back, looking at replacing the UCA's and the bushing in the Housing. Pretty much convinced the Housing bushing needs to stay stock type. Already did Lower LCA's last year and new iso's.... Just wanted to get some input and thoughts... And just to be clear, the ball joints are not broken, but they are definately worn and I am also getting more vibration thru the steering wheel then I should be. (thus the tie rods too) nothing bone-jarring or teeth rattling, but noticeably more. anyway...Car is 99.00% street driving...maybe a track event 1 or 2x a year...
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
05-28-2017, 09:18 AM | #2 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Little Project coming up
springs should be just fine, things like that can go through basically infinite compression cycles without losing anything. The springs should be fully collapsed before they pass that range of motion that would actually cause them to fatigue
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
05-28-2017, 07:32 PM | #3 |
Registered User
Join Date: Feb 2016
Location: Theodore Alabama
Posts: 282
|
Re: Little Project coming up
Consider replacing the inner tie rods as well , unless you ment all 4. Check the hubs too.
|
06-19-2017, 01:54 PM | #4 |
Registered User
Join Date: Jun 2011
Location: Midland, Texas
Posts: 787
|
Re: Little Project coming up
I personally would recommend going with the solid rack bushings that Maximum Motorsports carries. The install is easy and they really tighten up the steering without inducing any NVH. I recently installed new (OE) rear upper control arms and replaced the bushings as well. The Maximum bushing tool is worth its weight in gold for getting that done.
As DSG2003Mach1 said, the springs should be fine unless you're wanting to change the ride height. Might want to do caster camber plates if you haven't already.
__________________
No accident that my birthday is March 1st. Take out the 'r' and you end up with.... 2003 Torch Red Mach 1 ★ Rebuilt 3650 & MGW ★ Spec 2 & Fidanza flywheel ★ H&R Super Sports & Maximum Motorsports struts/shocks ★ Maximum Motorsports rear lowers, MM panhard, MM caster camber plates ★ Mosers + ARPs ★ Brembo slotted rotors, braided lines ★ Catless X and SLP LM2s ★ 18X9/10.5 - Toyo R888R |
06-19-2017, 02:19 PM | #5 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Little Project coming up
im still on stock rack bushings but I did put an MM steering shaft in and its pretty awesome (mine was done for clearance reasons on my Kooks LTs but the slop I had is gone). Just something to think about
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
07-01-2017, 11:43 PM | #6 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: Little Project coming up
Began my project this evening.
And for those who suggested it....That MM removal tool for the upper housing bushings is the bomb... that was too freakin easy... Just to update... went with Tokiko Illumina's...I like the simplicity and besides somebody bought the rear shocks for me for Fathers day...made the choice easier... Decided to go ahead and go with the steeda sport springs. Maybe a bad idea, but since everything is coming out anyway... Basically decided to replace most of the soft parts i can do without too much drama...and do the springs... got the upper rears in tonight. will tackle the springs and shocks in the rear tomorrow. waiting on the upper strut bushings and will probably hit the front end next weekend nice little project. looking forward to the results.
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
07-11-2017, 07:44 PM | #7 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: Little Project coming up
Got everything installed. Ball joints were shot. picked the car up from the alignment shop this afternoon. very happy with the results.
spent about 5 hours last saturday installing the front end parts... overall a good experience. Nice to know i still can do work like that and the car can drive down the road when I am done... next project...carpet...
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
07-11-2017, 07:46 PM | #8 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: Little Project coming up
Ball joint passenger side
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|