2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 05-07-2014, 10:40 AM   #76
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: Starting my Build

Quote:
Originally Posted by SuperMach1 View Post
Good read man. And im pretty sure all teskids are used blocks that people are using from the 96-99 cobras. I didn't even know the teskid can handle up to 1500hp
Yes, this is what I have read as well, mine was used and I had it 'cleaned up'. Figured it was rumored to be stronger, for the money it was a good durability upgrade, I will never reach that HP level.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 05-09-2014, 12:11 AM   #77
SpenO
Registered User
 
SpenO's Avatar
 
Join Date: Sep 2012
Location: Queen Creek
Posts: 91
Re: Starting my Build

Good looking build man. hoping to start mine as soon as i get the money for parts and ect. I actually found a teksid block (whole engine actually) for 400 bucks. had a blown piston but everything is still in good shape other than that piston skirt is gone and the connecting rod is bent, but still got the forged crank, heads, 98 cobra cams, and a few other parts for cheap. How much compression are you looking to make with those flat tops? and how much boost eventually? I am looking to go the same route and want to see how it turns out for you.
__________________
Dark Shadow Gray 2003 Mach 1
-JLT CAI
-Bassani xpipe and cat back
-long tube headers
-4.10 gears
-Drilled and Slotted rotors all 4
-Nitto 555
SpenO is offline   Reply With Quote
Old 05-09-2014, 06:10 PM   #78
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by SpenO View Post
Good looking build man. hoping to start mine as soon as i get the money for parts and ect. I actually found a teksid block (whole engine actually) for 400 bucks. had a blown piston but everything is still in good shape other than that piston skirt is gone and the connecting rod is bent, but still got the forged crank, heads, 98 cobra cams, and a few other parts for cheap. How much compression are you looking to make with those flat tops? and how much boost eventually? I am looking to go the same route and want to see how it turns out for you.

Thanks man. **** good deal on that engine if you ask me. As for compression I'm thinking it should be around 10.5-10.8 with the flat tops. And i plan on pushing 11-12 lbs of boost with the P1. If the car doesnt make 600hp with P1 I'll upgrade to the D1.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 05-09-2014, 06:32 PM   #79
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
Re: Starting my Build

I gotta feeling with that HP number you are looking at, upgrade to D1 and be done with it, that is really pushing a P1 isn't it?? (I have been wrong in the past, present AND future!!)
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 05-09-2014, 09:31 PM   #80
SpenO
Registered User
 
SpenO's Avatar
 
Join Date: Sep 2012
Location: Queen Creek
Posts: 91
Re: Starting my Build

Yea, i didnt have the money to spend but as soon as he said 400 i figured food wasnt necessary for a while. haha. So only 10.5:1? did you have the block decked? or the heads decked? cause if you did your looking at a bit more. i was thinking of doing that but getting the heads mildly ported so it would be about 11:1 or so. not sure how much hp i wanna make yet. im still thinking about selling a crank and a set of heads to buy a stroker kit....
__________________
Dark Shadow Gray 2003 Mach 1
-JLT CAI
-Bassani xpipe and cat back
-long tube headers
-4.10 gears
-Drilled and Slotted rotors all 4
-Nitto 555
SpenO is offline   Reply With Quote
Old 05-12-2014, 07:25 PM   #81
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by not a gt View Post
I gotta feeling with that HP number you are looking at, upgrade to D1 and be done with it, that is really pushing a P1 isn't it?? (I have been wrong in the past, present AND future!!)
Ive seen a couple guys push their P1 to 13psi before. And ya 600hp with a P1 sounds d@mn near impossible but I'm hoping the E-85 and the High compression will get me there
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 05-13-2014, 04:58 PM   #82
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Starting my Build

Lmk when its done and you head to the track so I can check it out bro.
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 05-14-2014, 06:05 PM   #83
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Will do bro. I'm getting ready to pull the old motor out. Should have it out by next week.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 05-14-2014, 08:07 PM   #84
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Talking Re: Starting my Build

Cool. U know I sold the mach right? Hopefully my coupe will be ready
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 05-14-2014, 09:13 PM   #85
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Whaaaaaaaat! How could you...lol

That's what's up. You sold it to a friend or a random buyer?
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 05-14-2014, 09:26 PM   #86
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Starting my Build

Quote:
Originally Posted by SuperMach1 View Post
Whaaaaaaaat! How could you...lol

That's what's up. You sold it to a friend or a random buyer?


Lol yea he lives in SA. I got me a 2013 FX2 Ecoboost. 87 coupe is almost done, 347 stroker and slighty modded :-)
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 05-14-2014, 10:53 PM   #87
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Starting my Build

Quote:
Originally Posted by SHAKN' 04 View Post
U know I sold the mach right?
The F? When did this happen?
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 05-14-2014, 10:54 PM   #88
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Starting my Build

Quote:
Originally Posted by SHAKN' 04 View Post
Lol yea he lives in SA. I got me a 2013 FX2 Ecoboost. 87 coupe is almost done, 347 stroker and slighty modded :-)
Details or pics of said 347 car?
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 05-15-2014, 04:59 PM   #89
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Let's see some pics of the coupe.....
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 05-15-2014, 11:57 PM   #90
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Starting my Build

[QUOTE=311-420;1581380]Details or pics of said 347

87 coupe black. New black carpet,new headlights,93 seats, aeromotive fuel pump, 347 stroker, afr 185 heads,edelbrock rpm intake and ported to match heads, 75mm throttle body,comp rockers, eagle rods, eagle crank, Bbk long tubes with xpipe,borla catback, ford racing 30 pound injectors, c&l 75mm mass air Cali for 30's, 410 gears, pro 5.0 shifter stock t5 with cobra clutch, ford racing 9mm wires, msd digital 6, with hvc coil, cervini 4 inch cowl. Ac and heater work flawless. I have it at a buddys shop, he's gonna put on a few more things. New weather stripping, 3.73 gears, speedo gear, little things to make it perfect. Its a 1 owner car, no rust and straightest body I've seen for this year of car. Once I get it back, ill detail it and post pics. Sold the mach a little over 2 months ago.
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 05-16-2014, 08:00 PM   #91
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Starting my Build

Looking forward to pics! Sounds like a solid setup. Good call going to 3.73s.
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 05-16-2014, 10:22 PM   #92
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Sounds like a good low 11 second setup. Maybe 9s with some juice. My bro in law is doing a identical setup as yours with his coupe. Except he's doing a 200 shot.

Post some pics or text me some.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 05-17-2014, 08:20 AM   #93
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Starting my Build

Thanks guys. This motor has gone 11.30's @ 122 with a 1.66 60' so its got some tweeking left in it.
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 05-24-2014, 04:41 PM   #94
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

After doing some reading I'll be switching to a 3 bolt timing cover. My CF hydro dipped timing cover will be for sale soon if anyone is interested.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 05-24-2014, 04:59 PM   #95
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
Re: Starting my Build

Quote:
Originally Posted by SuperMach1 View Post
After doing some reading I'll be switching to a 3 bolt timing cover. My CF hydro dipped timing cover will be for sale soon if anyone is interested.
Has someone been following DSG's issue with belt slip and the Thumper?? I enjoy reading the updates, coming together well.
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 05-24-2014, 05:36 PM   #96
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Yeah lol. I've read a few other threads over on Svt too. Seems like some people are really having problems with the single bolt tensioner. I'll be selling my Thump tensioner soon also.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 05-26-2014, 09:31 PM   #97
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quick question guys. Do I need a different procharger bracket for the 3 bolt timing cover?
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 07-20-2014, 04:38 PM   #98
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Update:

Sent the top end to the builder on Thursday.

Switched to a 3 bolt timing cover.

Coated top of pistons.

New EMP water pump.

Also bought some unecessary parts. Carbon fiber radiator cover & 17in RaceStars.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 07-23-2014, 05:31 PM   #99
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: Starting my Build

What is an EMP water pump? (I may be missing the obvious here)
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 07-23-2014, 05:50 PM   #100
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

It's a Stewart Components water pump. http://m.summitracing.com/parts/emp-ste50046s nothing special really.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:35 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<