|
|
Photo Gallery | $ Donations $ | Register | FAQ | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
07-15-2006, 08:35 PM | #1 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Anyone remove the ABS Bosch pump?
Looking into removing and re-routing brake lines.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
07-15-2006, 10:12 PM | #2 |
Super Moderator
Join Date: Sep 2003
Location: Houston (Crosby), Texas
Posts: 6,689
|
Re: Anyone remove the ABS Bosch pump?
No, but it looks really heavy.
__________________
2003 Dark Shadow Gray Mach 1 5.3L Stroker - FR500 Intake - Boss330 Heads 4.56 Gears - Kooks LTs - SCT Tune - Bassani X/Catback 2004 Silver Metallic Cobra 2.3 Whipple - 60lb injectors -Twin FGT Pumps 8 gauge/BAP/FPDM - JLT - Bassani Catted X / Catback - SCT PRP - 4# Lower - 3.50/3.00 Uppers - 19/24 PSI 2017 White Shelby F150 2.9L Whipple _______________ |
07-15-2006, 10:19 PM | #3 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Quote:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
07-16-2006, 12:50 AM | #4 |
Registered User
Join Date: Jan 2004
Location: Nor Cal
Posts: 148
|
Re: Anyone remove the ABS Bosch pump?
I have done that on one car when the pump failed due to user error... we basically just made short pieces to connect the lines. It only took about 15~20 minutes to do. It was Really easy to follow, but we did get codes kicked up and the check engine light.
__________________
Power is what you make of it |
07-17-2006, 08:40 AM | #5 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Anyone know the fitting/thread size of the brake lines going into the Bosch ABS pump??
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
07-17-2006, 12:32 PM | #6 | |
Registered User
Join Date: Jan 2004
Location: Nor Cal
Posts: 148
|
Re: Anyone remove the ABS Bosch pump?
Quote:
__________________
Power is what you make of it |
|
07-17-2006, 05:22 PM | #7 |
first 11 sec club member
Join Date: Jan 2003
Location: smalltown USA
Posts: 975
|
Re: Anyone remove the ABS Bosch pump?
Phil we have bypassed it on several cars now just by connecting
the lines together . it is about 16# if I remember right not sure if that was with or with out bracket . see ya JEFF
__________________
03 black 5sp iup stripeless NMRA FS #2 2007 NMRA FS #2 2006 NMRA FS #4 2005 NMRA FS #3 2004 NA best et 11.10 @ 120 @ 3320# |
07-17-2006, 06:21 PM | #8 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Quote:
Thanks Silverstangs!
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
07-18-2006, 06:01 PM | #9 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Quote:
What size Tee connectors/unions did you use to reconnect the brake lines? Not sure what the bracket is your referring to..??
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
07-19-2006, 02:41 PM | #10 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
I removed the ABS pump today and will take to work to find out the thread sizes. There are 2 different size ports, both seem to be metric..
I will need to get 2 female brake tube tees. One for front and one for the rear. I went to NAPA with the pump and they had nothing I could use.. The Bosch ABS pump with bracket weighs 9.7 lbs.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
07-20-2006, 01:58 PM | #11 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
The 5 smaller brake line ports on the ABS pump are 10m x 1.0 and the one larger right rear brake line port is 12m x 1.0 I made a small manifold/junction box out of T-6061 and will install later on today..
I just copied how the top of the ABS pump is with the 4 brake lines on top & the 2 master cylinder lines on the side. The ABS pump is labled LF, RF which is the 2 bottom ports (looking at the 1st pic). LR, RR are the 2 top ports, RR being the larger port. I will see how the brakes work and I may have to install a manual brake proportional valve off the MC if I start to lock up the front skinnies..
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ Last edited by Phil; 07-20-2006 at 03:33 PM. |
07-20-2006, 07:02 PM | #12 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Quote:
http://store.summitracing.com/partde...5&autoview=sku I did mess up on my discription of the brake routing. The 2 top side left ports are front left/left rear.. The 2 top right side ports are from the master cylinder Front/Rear, the rear being the larger port then the rest. The 2 side ports are front right/right rear. It can confuse you the way it's labled on the ABS pump into thinking the 2 top right ports go to the brakes. Since I have easy access to all brake lines with the ABS removed, now is a good time to remove all old brake fluid with my hand held vacuum pump.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ Last edited by Phil; 07-20-2006 at 07:27 PM. |
|
07-21-2006, 06:34 PM | #13 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
I ended up making another brake manifold, I was not happy with one of the port threads it was giving me trouble when installing last night.
This manifold I labled with a letter punch set.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
07-22-2006, 09:59 PM | #14 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Brake manifold installed.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
07-25-2006, 05:00 PM | #15 |
Registered User
Join Date: May 2006
Location: Houston, TX
Posts: 8
|
Re: Anyone remove the ABS Bosch pump?
So how did the brake distribution block work for you, have you tried it yet?
|
07-25-2006, 05:50 PM | #16 |
Registered User
Join Date: May 2006
Location: Houston, TX
Posts: 8
|
Re: Anyone remove the ABS Bosch pump?
Loyd
|
07-25-2006, 11:36 PM | #17 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Quote:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
07-26-2006, 09:17 AM | #18 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Quote:
Having someone pump the brakes for you is the best.. The hand held vacuum pump works OK!
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
07-26-2006, 07:18 PM | #19 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Norwalk has some old time racing event going on with drag cars from the early 70's/60's..
http://www.norwalkraceway.com/main-e...-suede-cruise/ No T&T Friday either or regular points meet Saturday.. I'll have to wait till next Wednesday night..
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
07-30-2006, 09:42 PM | #20 |
FASTEST MACH ON PLANET
Join Date: Jun 2004
Location: Youngstown, Ohio
Posts: 404
|
Re: Anyone remove the ABS Bosch pump?
Phil I would like to remind you that our annual track rental is August 18th this year. We were supposed to meet at last years event but we got rained out. Hope to see ya there! Gates open at 9 am, racing is between 10am and 4pm.
__________________
Possibly the highest hp 4.6 on the registry? Marco Abruzzi turbo 400 tranny tilt, cruise, air, full interior street car Dyno pull http://videos.streetfire.net/video/B...ach_723489.htm newest member of the 1000 hp club! 2008 Mach1 shootout Ultimate Mach class winner Cool vid goin 9.20's and beatin it on the street http://www.youtube.com/watch?v=ziYRp9JgzLo All on a TRUE 281 cubic inch engine. |
07-31-2006, 10:08 AM | #21 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Quote:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
08-06-2006, 05:18 PM | #22 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Finally took the Mach out for a test drive & all is good with the brake manifold I made. Braking is good and straight without locking up the front skinnies. I'm not going to need a manual proportioning valve..
No leaks from manifold connections!! http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
08-06-2006, 10:34 PM | #23 |
FASTEST MACH ON PLANET
Join Date: Jun 2004
Location: Youngstown, Ohio
Posts: 404
|
Re: Anyone remove the ABS Bosch pump?
That's reassuring to know......
__________________
Possibly the highest hp 4.6 on the registry? Marco Abruzzi turbo 400 tranny tilt, cruise, air, full interior street car Dyno pull http://videos.streetfire.net/video/B...ach_723489.htm newest member of the 1000 hp club! 2008 Mach1 shootout Ultimate Mach class winner Cool vid goin 9.20's and beatin it on the street http://www.youtube.com/watch?v=ziYRp9JgzLo All on a TRUE 281 cubic inch engine. |
08-07-2006, 09:06 AM | #24 |
Registered User
Join Date: May 2006
Location: Houston, TX
Posts: 8
|
Re: Anyone remove the ABS Bosch pump?
I'll take one. Money is on the way.
|
08-07-2006, 09:15 AM | #25 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Anyone remove the ABS Bosch pump?
Quote:
Let me know how the manifold feels to you. Thanks!
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|