2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 04-11-2020, 07:14 PM   #1
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Max power output of a P-1SC on a Mach 1?

Is a Procharger P-1SC supercharger capable of making 600 rwhp on a 2003-04 Mach 1 if it has free-flowing exhaust, intake/bigger throttle body, forged rotating assembly (near stock compression ratio), 3.73 gears, aluminum driveshaft, and upgraded fuel system (bigger injectors, dual fuel pumps, voltage boosters, etc...) on pump gas?
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 04-13-2020, 12:16 PM   #2
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: Max power output of a P-1SC on a Mach 1?

You'd be asking a lot of it imho, especially if the cams are still stock.
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 04-14-2020, 10:10 AM   #3
BONESTOCK
Registered User
 
Join Date: Jul 2004
Location: Raleigh , NC
Posts: 2,093
Re: Max power output of a P-1SC on a Mach 1?

Quote:
Originally Posted by SouthKak_Mach1 View Post
Is a Procharger P-1SC supercharger capable of making 600 rwhp on a 2003-04 Mach 1 if it has free-flowing exhaust, intake/bigger throttle body, forged rotating assembly (near stock compression ratio), 3.73 gears, aluminum driveshaft, and upgraded fuel system (bigger injectors, dual fuel pumps, voltage boosters, etc...) on pump gas?

HAha! You listen to Alex, huh?
I don't know about the P1SC though. I have a P1SC-2 and it should be good for it. But it'd be working.
__________________
2004 Torch Red Procharged Mach 1
BONESTOCK is offline   Reply With Quote
Old 04-14-2020, 09:18 PM   #4
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Re: Max power output of a P-1SC on a Mach 1?

Quote:
Originally Posted by DSG2003Mach1 View Post
You'd be asking a lot of it imho, especially if the cams are still stock.
Looks like I may have to send my P-1SC head unit to Procharger to upgrade it to a D-1SC.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 04-14-2020, 09:22 PM   #5
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Re: Max power output of a P-1SC on a Mach 1?

Quote:
Originally Posted by BONESTOCK View Post
HAha! You listen to Alex, huh?
I don't know about the P1SC though. I have a P1SC-2 and it should be good for it. But it'd be working.
Yeah, I listen to Alex from time to time...lol. Probably going to have Procharger upgrade my head unit to D-1SC. Going to check with them about price.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 04-15-2020, 08:42 AM   #6
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: Max power output of a P-1SC on a Mach 1?

Quote:
Originally Posted by SouthKak_Mach1 View Post
Yeah, I listen to Alex from time to time...lol. Probably going to have Procharger upgrade my head unit to D-1SC. Going to check with them about price.
I wann say it was $1200ish 5-6 years ago
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 04-15-2020, 09:11 AM   #7
BONESTOCK
Registered User
 
Join Date: Jul 2004
Location: Raleigh , NC
Posts: 2,093
Re: Max power output of a P-1SC on a Mach 1?

Quote:
Originally Posted by SouthKak_Mach1 View Post
Yeah, I listen to Alex from time to time...lol. Probably going to have Procharger upgrade my head unit to D-1SC. Going to check with them about price.
haha! Nice! The "free flowing exhaust" tipped me off!
__________________
2004 Torch Red Procharged Mach 1
BONESTOCK is offline   Reply With Quote
Old 04-15-2020, 10:19 PM   #8
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Max power output of a P-1SC on a Mach 1?

D1 will be worth it if you need to make that kind of power. Spinning the p1 that hard will make too much heat, be too risky with gasoline and you'll likely still fall short of 600.
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 05-01-2020, 05:21 AM   #9
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Max power output of a P-1SC on a Mach 1?

I don't see it happening on pump gas but I made 601/524 on a dyno-jet with a p1sc 12 psi and e85.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 05-01-2020, 07:42 AM   #10
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Re: Max power output of a P-1SC on a Mach 1?

Quote:
Originally Posted by SuperMach1 View Post
I don't see it happening on pump gas but I made 601/524 on a dyno-jet with a p1sc 12 psi and e85.
Going to be tuned for E54 since E85 is scarce in Arizona.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 05-01-2020, 07:48 AM   #11
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Re: Max power output of a P-1SC on a Mach 1?

Quote:
Originally Posted by DSG2003Mach1 View Post
I wann say it was $1200ish 5-6 years ago
Looks like it's $1400 nowadays to upgrade + shipping. Procharger tech told me it takes about an average of 10 days from start to finish before they ship the blower back to me.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:58 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<