2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 06-22-2007, 12:35 AM   #101
BlueDevil04
Are all Machs this Fast??
 
BlueDevil04's Avatar
 
Join Date: May 2004
Location: Concord, N.C.
Posts: 617
Re: Official Procharger HP/TQ/mods thread:

Stock bottom end: No. 8.5/ compression

Head unit: D1SC

Pulley size and boost level: 3.5 rr pulley, 14 psi at 5250 rpms

Fuel system: 60lb injectors, sctba2400 with MAFia, twin gt pumps

Tuner: Prodyno
Other notable mods: full exhaust, stage 3 crowers, and a little more. plus tons of belt slip(hopefully fixed by next week for a new dyno run)

RWHP/RWTQ: 590rwhp 516rwtq
__________________
Mods:
blown motor mod!!!
660 rwhp and 565 rwhp with 17lbs of boost. (sold)
BlueDevil04 is offline   Reply With Quote
Old 09-15-2007, 10:10 PM   #102
Bullitt5094
Mach/Bullitt Hybred
 
Bullitt5094's Avatar
 
Join Date: Feb 2004
Location: Houston
Posts: 103
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Lynemup View Post
You guys are in for it now . I will be the 1st Mach to get 1000 RWHP . By next Fri.. Unless someone is getting there quicker .

Motor is out of the car again for some very serious goodies .
Impressive dyno numbers. What's your best 1/4 mile pass so far?
__________________
9.33@152 mph 2001 Bullitt
BC Automotive 4R70W, G&G Performance / Kris Starnes Racing 4V Motor, Vortech JT-Trim
Almost Stock '03 Mach 1
'06 F250 PSD
Bullitt5094 is offline   Reply With Quote
Old 09-15-2007, 10:13 PM   #103
Linumup
Registered User
 
Linumup's Avatar
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Bullitt5094 View Post
Impressive dyno numbers. What's your best 1/4 mile pass so far?
I guess we will all find out at the Showdown on Fri..
__________________
1331 RWHP 1296 RWTQ 28 PSI
5.3 liter 322.4 cu.in. Big Bore Stroker
HP PNP Heads w/5 Angle Valve Job
HP Custom Cams
ATI Racing TH400 Cheetah SCS Air Assisted Shifter
Strange 31 spline axles w/3:55
F1R Procharger w/Cog Set-up
Magnafuel 750 -10AN Feed -8AN Return
200 Direct Wet w/MSD window switch & controller
Big Stuff 3 w/Gen. 3 Pro EFI system
Kooks 1.78 LTS 3" Custom Exhaust
Tuning by DGR Racing



DYNO KING
Linumup is offline   Reply With Quote
Old 09-16-2007, 12:51 PM   #104
Bullitt5094
Mach/Bullitt Hybred
 
Bullitt5094's Avatar
 
Join Date: Feb 2004
Location: Houston
Posts: 103
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Lynemup View Post
I guess we will all find out at the Showdown on Fri..
What are you expecting? High 8s, low 9s? What was it running before these last round of mods?
__________________
9.33@152 mph 2001 Bullitt
BC Automotive 4R70W, G&G Performance / Kris Starnes Racing 4V Motor, Vortech JT-Trim
Almost Stock '03 Mach 1
'06 F250 PSD
Bullitt5094 is offline   Reply With Quote
Old 09-16-2007, 11:11 PM   #105
Linumup
Registered User
 
Linumup's Avatar
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Bullitt5094 View Post
What are you expecting? High 8s, low 9s? What was it running before these last round of mods?
The pros have put the car in the ?s . Id rather not post my times until after the event . Its been above my cage specs. ! Sorry its all i can say for now .
__________________
1331 RWHP 1296 RWTQ 28 PSI
5.3 liter 322.4 cu.in. Big Bore Stroker
HP PNP Heads w/5 Angle Valve Job
HP Custom Cams
ATI Racing TH400 Cheetah SCS Air Assisted Shifter
Strange 31 spline axles w/3:55
F1R Procharger w/Cog Set-up
Magnafuel 750 -10AN Feed -8AN Return
200 Direct Wet w/MSD window switch & controller
Big Stuff 3 w/Gen. 3 Pro EFI system
Kooks 1.78 LTS 3" Custom Exhaust
Tuning by DGR Racing



DYNO KING
Linumup is offline   Reply With Quote
Old 09-18-2007, 09:29 PM   #106
dontmockthemach
Black Pearl
 
dontmockthemach's Avatar
 
Join Date: Oct 2006
Location: Okinawa, Japan
Posts: 765
Re: Official Procharger HP/TQ/mods thread:

Got mine tuned by Darrin last week, did a great job! It feels a lot better, and extremely smooth...Now don't knock the power numbers until you finish reading...

Stock Bottom End
P1SC, 3.80 Pulley
Fuel System:42 lb. injectors, Focus Pump
Tuning: Maf.ia, SCT X-Cal2
Tuner: Darrin
Exhaust:Jegs offroad H, Magnaflow catback
RWHP/RWTQ 378/375 @ 3.5 lbs. of boost

I didn't have a gauge with me when tuning, but installed today. Boy was I suprised. Vacuum reads what I consider normal at 20 idle, give it some gas it hits 10, lots of gas in N it will read 0 vac. I was suprised when I got into the accelerator today and it hit 3 lbs, and at about 6k it hit MAYBE a bit past 4. Gotta find the leak, wherever it might be. Used kit, and I doubt it is in the gauge. Will post back up when I get it figured out. Should be about 9 lbs atleast I would think, and might have to drop down the timing! How small of a leak would it take to lose that boost?! Oh well, she's consistent and safe
__________________
*Procharged Black 03*

Last edited by dontmockthemach; 06-03-2015 at 09:04 AM.
dontmockthemach is offline   Reply With Quote
Old 09-18-2007, 09:37 PM   #107
blown03Mach1
8LB YNER
 
blown03Mach1's Avatar
 
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
Re: Official Procharger HP/TQ/mods thread:

Your vacuum is right were mine is so I do not think you have a leak. I would look at a possible bad surge valve.
__________________
Just because you're winnin'
Don't mean you're the lucky ones


TR 2003 (Jezebel) sold Mar 12...
blown03Mach1 is offline   Reply With Quote
Old 09-18-2007, 11:41 PM   #108
dontmockthemach
Black Pearl
 
dontmockthemach's Avatar
 
Join Date: Oct 2006
Location: Okinawa, Japan
Posts: 765
Re: Official Procharger HP/TQ/mods thread:

that would be awesome news, because I have the race intercooler, and that mug is a pain to take off! Not to mention all the pipes, etc. I was thinking hks, and just tig welding it on or whatever needs to be done. Thanks for the input, I am ready to get this thing finished and now mess with it for a few months!

Oh, and when I looked at the surge valve (vented to atmosphere), I could still see light around the edges of the butterfly valve, when held up to the light. I am guessing this isn't normal? I also tightened the allen heads on either side of the bov, just because I thought they were wiggled loose. Maybe they were right where they needed to be
__________________
*Procharged Black 03*
dontmockthemach is offline   Reply With Quote
Old 09-30-2007, 03:36 AM   #109
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Official Procharger HP/TQ/mods thread:

STock Bottom End

Procharger 8psi

BBK LT BBK X Magnaflow CB

42lb injectors L/Maf

Diablo dynotuned by the Hot Rod Store of Texas

430rwhp 404rwtq
SuperMach1 is offline   Reply With Quote
Old 10-09-2007, 05:09 PM   #110
jsingletary
Mach Maniac
 
jsingletary's Avatar
 
Join Date: Aug 2003
Location: florida
Posts: 216
Re: Official Procharger HP/TQ/mods thread:

New rebuild
Bottom end: Iron block, CP 9cc dish pistons, manley rods, and stock crank cut 10/10. compression ratio 9.3 to 1.
Head unit: D1SC, 18 PSI, 3.6 pulley
Fuel system: twin super car pumps, dual fpdm, 2 -6 lines into 1 -8 line to cpr fuel rails, and 60# injectors.
Tuner: SCT tuned by George Landis at SRC racing.
Other mods: crower stage 3 blower cams, springs, and retainers. Full catless exhaust.
552 RWHP 484 TQ.
Basicly the new motor made the same power to the tires as the last motor did with 1/2 of a point lower compression.
__________________
Azure Blue 5-spd (IUP)
Wellington Fl.

Mods:
Procharged, SRC shortblock .020 OVER, Crower stage 3 supercharger Cams, Full suspension, Rearend, 3650 trans with 26 spline input shaft & Tripple walbro return fuel system with 80# inj. on E-85

www.srcracing.com

Baseline Dynojet: 275 whp & 309 tq.
Current best: 806 whp & 656 tq. Boosted

Weight W/ driver: 3620

Best 1/4 mile time: 10.988 @130.63
60 ft. time: 1.619
Best MPH 131.41
Best 60 ft. time: 1.565
jsingletary is offline   Reply With Quote
Old 11-29-2007, 01:05 PM   #111
Evn62719
MarinesMach1
 
Evn62719's Avatar
 
Join Date: Dec 2006
Location: Denham Springs,LA
Posts: 467
Re: Official Procharger HP/TQ/mods thread:

Stock bottom end: No- CP pistons 17cc dish, probe H-beams

Head unit: P1SC

Pulley size and boost level: 3.8 pulley, 10psi

Fuel system: 60lb injectors, Lightning 90mm MAF with MAFia, 03 Cobra tank and pumps

Tuner: SCT tuned by prodyno (temporarily)

Other notable mods: Comp stage 2 cams, beehive springs, rpm transmissions level v T-56, Mac longtubes and x-pipe with Flowmasters and electric cutouts,full suspension

RWHP/RWTQ: 520rwhp 485rwtq
__________________
P1SC/3.4 pulley,60# injectors, Comp stage 2 blower cams,Cp pistons, Probe rods Beehive valve springs,AFM power pipe,SLP line lock,Cobra tank and pumps,BBK long tubes, o/r x,Magnapacks,T56-26 spline input shaft, MGW shifter,Centerforce DFX, Steeda springs,Steeda H/D UCA's,Metco LCA's,Eaton posi,3.73's,Moser 31 splines, Black 18" FR500's 295/35 BFG drag radials.
Evn62719 is offline   Reply With Quote
Old 12-05-2007, 04:20 PM   #112
Funhog
Mach and Harley owner
 
Funhog's Avatar
 
Join Date: Nov 2005
Location: Fort Riley, KS
Posts: 227
Re: Official Procharger HP/TQ/mods thread:

I want to get the P1SC for my 03 mach with 33K miles. Here are the things that everyone seems to have in common
-Bottom end is stock
-42lb inj
-Cobra or SVT Focus Pump
-Some exhaust
-Tune

How much does it cost for everything? I already have the exhaust, tune, RAI. Besides the list above and what I already have, what else do I need? I would wanna push from 6-9psi and Im expecting that would put me around 420-450rwhp and 420rwtq. Thanks
__________________
92 5.0LX - CAI, TB, Shorties, O/R H, Flows, 3.55, A/C and Smog Delete, U/D Pullies, Auto w/ Shift Kit - SOLD
03 Mach 1 - P1SC with 3.60", bored .020 over, forged bottom end, FRPP shorties, Magnaflow catted X, Magnapacks, Tokico blues, H&R SS, MM C/C plates, Spec 2+, Steeda FWA, MM clutch quadrant, MGW Orange, FR500 17x9/17x10.5
My Rides
Funhog is offline   Reply With Quote
Old 12-05-2007, 04:59 PM   #113
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Funhog View Post
I want to get the P1SC for my 03 mach with 33K miles. Here are the things that everyone seems to have in common
-Bottom end is stock
-42lb inj
-Cobra or SVT Focus Pump
-Some exhaust
-Tune

How much does it cost for everything? I already have the exhaust, tune, RAI. Besides the list above and what I already have, what else do I need? I would wanna push from 6-9psi and Im expecting that would put me around 420-450rwhp and 420rwtq. Thanks
The RAI cannot be used with the Procharger. The tune is useless as you will need a new tune. Expect to pay around $5000.00 for the kit/tune/extra parts.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 12-06-2007, 05:08 AM   #114
Funhog
Mach and Harley owner
 
Funhog's Avatar
 
Join Date: Nov 2005
Location: Fort Riley, KS
Posts: 227
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Scott McClure View Post
The RAI cannot be used with the Procharger. The tune is useless as you will need a new tune. Expect to pay around $5000.00 for the kit/tune/extra parts.
5G is what I was expecting to pay. And I know my existing tune wouldnt work. Besides what I mentioned in the list, is there anything else? And does anyone have any pictures of their setup with the procharger?
__________________
92 5.0LX - CAI, TB, Shorties, O/R H, Flows, 3.55, A/C and Smog Delete, U/D Pullies, Auto w/ Shift Kit - SOLD
03 Mach 1 - P1SC with 3.60", bored .020 over, forged bottom end, FRPP shorties, Magnaflow catted X, Magnapacks, Tokico blues, H&R SS, MM C/C plates, Spec 2+, Steeda FWA, MM clutch quadrant, MGW Orange, FR500 17x9/17x10.5
My Rides
Funhog is offline   Reply With Quote
Old 12-06-2007, 06:17 AM   #115
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Procharger HP/TQ/mods thread:

My old setup.
Attached Thumbnails
IM000133.jpg  
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 12-08-2007, 02:29 PM   #116
Funhog
Mach and Harley owner
 
Funhog's Avatar
 
Join Date: Nov 2005
Location: Fort Riley, KS
Posts: 227
Re: Official Procharger HP/TQ/mods thread:

Ive done a little more research. Here is what I am leaning towards.

P1SC ( I dont plan on going bigger in the future, otherwise I would get the D1SC)
42lb inj
Cobra pumps
Diablosport MAFia
XCal2 tune (already own-Ill have them redo it)

I still have a few more questions though.

-Is a cobra tank necessary or is stock fine?
-Is a BAP required? I noticed people that have focus pumps have them but not many with cobra pumps
-What size pulley will keep me between 6-8psi? It seems like 4" and up will get me there.
-What is considered conservative timing? I read that the A/F ratio should be between 11.8-12.0....am I correct?
-Where is the best website to buy everything I need?

Thanks for the help
__________________
92 5.0LX - CAI, TB, Shorties, O/R H, Flows, 3.55, A/C and Smog Delete, U/D Pullies, Auto w/ Shift Kit - SOLD
03 Mach 1 - P1SC with 3.60", bored .020 over, forged bottom end, FRPP shorties, Magnaflow catted X, Magnapacks, Tokico blues, H&R SS, MM C/C plates, Spec 2+, Steeda FWA, MM clutch quadrant, MGW Orange, FR500 17x9/17x10.5
My Rides
Funhog is offline   Reply With Quote
Old 12-08-2007, 02:39 PM   #117
Stopsign32v
Registered User
 
Stopsign32v's Avatar
 
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
Re: Official Procharger HP/TQ/mods thread:

Stock bottom end: YES

Head unit: P1SC

Pulley size and boost level: 14psi pulley, saw 11psi at the gauge.

Fuel system: 42lb injectors, 255 chicane fuel pump...Ran out of fuel at around 6,700rpms

Tuner: Tim Matherly

Other notable mods: ported intake, Hooker long tube headers, 4.30 gears, my custom made exhaust, Anderson 4" powerpipe

RWHP/RWTQ: I'm guessing around 520-540rwhp It ran 126mph in the 1/4th with the car at fuel weight.







New numbers and times coming soon...
__________________
03 white Mach1

JLT RAI | 1/2 spacer | Catback | 4.56s

7.76@87.8mph
Stopsign32v is offline   Reply With Quote
Old 12-08-2007, 03:29 PM   #118
blown03Mach1
8LB YNER
 
blown03Mach1's Avatar
 
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
Re: Official Procharger HP/TQ/mods thread:

-Is a cobra tank necessary or is stock fine?

Not necessary, but it does contain baffling inside to aid with keeping fuel slosh to a minimum and this in turn keeps you from cavtateing your fuel pump under hard acceleration. Keeping at least 1/4 tank of gas will do the same (no cavitation)

-Is a BAP required? I noticed people that have focus pumps have them but not many with cobra pumps

I am running the dual Cobra pumps without the BAP and I have no problems with my setup.

What size pulley will keep me between 6-8psi? It seems like 4" and up will get me there.

Not sure about the 6-8, but my P-1 is a 4" and I see 9.5lbs.

-What is considered conservative timing? I read that the A/F ratio should be between 11.8-12.0....am I correct?

My version of conservative is 13 deg on my car. I am sure others will say something about the same. My A/F is 11.2 @13 deg and the other tune is 11.7 @ 18 deg. I wold not want to see leaner then 12 on a stock bottom

Where is the best website to buy everything I need?

Superchargers4less, Texashotrods, RPMoutlet, and many more. Suggest google or perhaps someone else can chime in on this one.

BTW just for S&G's, I am pushing 425 and 460 rwhp (Loaded dyno) on my two tune on the stock bottom.
__________________
Just because you're winnin'
Don't mean you're the lucky ones


TR 2003 (Jezebel) sold Mar 12...
blown03Mach1 is offline   Reply With Quote
Old 12-21-2007, 12:36 AM   #119
icutice2
twinturbomach
 
icutice2's Avatar
 
Join Date: Jul 2007
Location: lavergne tennessee
Posts: 341
Smile Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Funhog View Post
I want to get the P1SC for my 03 mach with 33K miles. Here are the things that everyone seems to have in common
-Bottom end is stock
-42lb inj
-Cobra or SVT Focus Pump
-Some exhaust
-Tune

How much does it cost for everything? I already have the exhaust, tune, RAI. Besides the list above and what I already have, what else do I need? I would wanna push from 6-9psi and Im expecting that would put me around 420-450rwhp and 420rwtq. Thanks
The question is not how much it costs. The question is what do you want your car to do and how long you want it to hold up??
__________________
TWIN HP 57MM TURBOS. BOSS BLOCK 5.5 L STROKED ENGINE. FULL BALANCED AND BLUE PRINTED, FULL RACE HEADS AND STAGE III CUSTOM GRIND CAMS
TKO 600 ROAD RACE TRANNY
TWIN DISC CLUTCH
RETURN FUEL SYSTEM
80LBS INJECTORS
FULL RACE SUSPENSION
18LBS DUAL WASTEGATE SPRINGS
TWIN 62MM THROTTLE BODY
KENNY BELL BAP AND BAS
MAFIA BIG AIR CHIP
AND MORE FUN STUFF
PUMP GAS 776RWHP 16LBS BOOST
C-16 RACE 981 RWHP 20LBS BOOST

I RACE CROTCH ROCKETS FOR FUN
icutice2 is offline   Reply With Quote
Old 12-23-2007, 11:43 AM   #120
Funhog
Mach and Harley owner
 
Funhog's Avatar
 
Join Date: Nov 2005
Location: Fort Riley, KS
Posts: 227
Re: Official Procharger HP/TQ/mods thread:

I obviously want the car to last as long as possible. Whats the difference btwn the P1SC and P1SC stage 2?

*i got the answer, p1sc 2 gets ya a little more boost. btwn the p1sc and d1sc.
__________________
92 5.0LX - CAI, TB, Shorties, O/R H, Flows, 3.55, A/C and Smog Delete, U/D Pullies, Auto w/ Shift Kit - SOLD
03 Mach 1 - P1SC with 3.60", bored .020 over, forged bottom end, FRPP shorties, Magnaflow catted X, Magnapacks, Tokico blues, H&R SS, MM C/C plates, Spec 2+, Steeda FWA, MM clutch quadrant, MGW Orange, FR500 17x9/17x10.5
My Rides

Last edited by Funhog; 12-24-2007 at 01:05 AM.
Funhog is offline   Reply With Quote
Old 12-23-2007, 12:41 PM   #121
Braceyaself
Registered User
 
Braceyaself's Avatar
 
Join Date: Mar 2006
Location: wolcott,ct
Posts: 1,598
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Stopsign32v View Post
Stock bottom end: YES

Head unit: P1SC

Pulley size and boost level: 14psi pulley, saw 11psi at the gauge.

Fuel system: 42lb injectors, 255 chicane fuel pump...Ran out of fuel at around 6,700rpms

Tuner: Tim Matherly

Other notable mods: ported intake, Hooker long tube headers, 4.30 gears, my custom made exhaust, Anderson 4" powerpipe

RWHP/RWTQ: I'm guessing around 520-540rwhp It ran 126mph in the 1/4th with the car at fuel weight.







New numbers and times coming soon...

stock motor or built motor?
__________________
X cal 2 jannetty racing tuned
Turbo mach
to many mods to list
9s or bust in 09
10.8@126
Braceyaself is offline   Reply With Quote
Old 01-06-2008, 01:56 PM   #122
Funhog
Mach and Harley owner
 
Funhog's Avatar
 
Join Date: Nov 2005
Location: Fort Riley, KS
Posts: 227
Re: Official Procharger HP/TQ/mods thread:

I just ordered my P1SC from S/C4less. I also got 42# inj from them too. I bought the wideband a/f gauge and boost gauge with the dual a pillar pod. I just need to buy the cobra pumps and MAFia. Now I know I have the RAI and it wont work with the s/c, will the Procharger come with something to replace it or do I need to get the anderson power pipe? And what are the extra wires I need to run the cobra pump and where do I find em?
__________________
92 5.0LX - CAI, TB, Shorties, O/R H, Flows, 3.55, A/C and Smog Delete, U/D Pullies, Auto w/ Shift Kit - SOLD
03 Mach 1 - P1SC with 3.60", bored .020 over, forged bottom end, FRPP shorties, Magnaflow catted X, Magnapacks, Tokico blues, H&R SS, MM C/C plates, Spec 2+, Steeda FWA, MM clutch quadrant, MGW Orange, FR500 17x9/17x10.5
My Rides
Funhog is offline   Reply With Quote
Old 01-06-2008, 02:26 PM   #123
blown03Mach1
8LB YNER
 
blown03Mach1's Avatar
 
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
Re: Official Procharger HP/TQ/mods thread:

The Procharger system will come with an inlet pipe, though it is nothing fancy. You can go with a power pipe, but I pushed 458 through the Procharger pipe which was plenty for me.
__________________
Just because you're winnin'
Don't mean you're the lucky ones


TR 2003 (Jezebel) sold Mar 12...
blown03Mach1 is offline   Reply With Quote
Old 01-06-2008, 02:49 PM   #124
Linumup
Registered User
 
Linumup's Avatar
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by blown03Mach1 View Post
The Procharger system will come with an inlet pipe, though it is nothing fancy. You can go with a power pipe, but I pushed 458 through the Procharger pipe which was plenty for me.
You changed your name . Hiding out ? Still selling ?


Never would have noticed if i didnt see the hottie bent over the hood in your avatar .
__________________
1331 RWHP 1296 RWTQ 28 PSI
5.3 liter 322.4 cu.in. Big Bore Stroker
HP PNP Heads w/5 Angle Valve Job
HP Custom Cams
ATI Racing TH400 Cheetah SCS Air Assisted Shifter
Strange 31 spline axles w/3:55
F1R Procharger w/Cog Set-up
Magnafuel 750 -10AN Feed -8AN Return
200 Direct Wet w/MSD window switch & controller
Big Stuff 3 w/Gen. 3 Pro EFI system
Kooks 1.78 LTS 3" Custom Exhaust
Tuning by DGR Racing



DYNO KING
Linumup is offline   Reply With Quote
Old 01-06-2008, 03:11 PM   #125
blown03Mach1
8LB YNER
 
blown03Mach1's Avatar
 
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Lynemup View Post
You changed your name . Hiding out ? Still selling ?


Never would have noticed if i didnt see the hottie bent over the hood in your avatar .

LOL Well my name was changed to this one as I use this name on nearly every other board I frequent. I requested the name change since I have become s/c after joining in here.

Now as far as the sale..... I have still been looking at it, but I cannot pull the trigger on putting it up for sale. I either sell it, or sink some $$$$ into it. I would like to just forge the motor, but as you are well aware, this stuff is not cheap!

BTW, the hottie has since posed in Playboys "Fresh faces"...:ORANGE:
__________________
Just because you're winnin'
Don't mean you're the lucky ones


TR 2003 (Jezebel) sold Mar 12...

Last edited by blown03Mach1; 09-13-2008 at 08:47 AM.
blown03Mach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:57 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<