2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 04-05-2008, 08:43 AM   #1
lxh89
Registered User
 
lxh89's Avatar
 
Join Date: Jan 2003
Location: Houston, Tx
Posts: 1,530
Official Whipple/KB/Eaton HP/TQ/mods thread:

Having been inspired by the sticky that Viperbluelx made about two years ago, would like start one specific to positive displacement blowers. Post up your stats gentlemen. Please use the below format (same as procharger thread):

Stock bottom end: NO

PD unit: Whipple 2.3L

Pulley size and boost level: 3.25" Upper/8.5" Lower, 17psi

Fuel system: 60lb injectors, SCT BA3000, Ford GT Pumps, KB BAP, PPRV Delete, Stage 2 FPDM, 8AWG to FPDM, 10AWG to Pumps

Tuner: SCT Pro Racer Package

Other notable mods: HP custom cams, ported heads, Big Oval TB, Bassani Midlength, Catted X

RWHP/RWTQ: 629 rwhp / 577rwtq
__________________
2015 Ruby Red Mustang GT Premium
Bone Stock

03 Oxford White Mach 1 - SOLD
1.72 60',10.932@131.60MPH, 3800# Raceweight

Last edited by lxh89; 04-05-2008 at 11:21 PM.
lxh89 is offline   Reply With Quote
Old 04-05-2008, 06:11 PM   #2
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Stock bottom end: Yes

PD unit: Kenne Bell 2.2

Pulley size: 3.75 upper/stock lower 9lbs.

Fuel system: 60lb. injectors, Cobra tank, GT pumps, Stage II FPDM, PPR Delete, BAP, Upgraded wiring,
SCT 2400, MAF.ia

Tuner: SCT by Chris @ EFILgistics

Other mods: Kooks 1 3/4 Longtubes, Kooks X-Pipe, Bassani Catback, Big Oval Throttle Body, GT cams,
Livernois Springs, Modular Performance built Teksid forged shortblock, Jan.05 Heads, 3.73's, 31 Spline rear, T-56.

RWHP/RWTQ 493/468
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD

Last edited by Scott McClure; 06-29-2008 at 08:19 AM.
Scott McClure is offline   Reply With Quote
Old 04-05-2008, 10:00 PM   #3
machgsxr
Registered User
 
machgsxr's Avatar
 
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Stock bottom end: Yes

PD unit: Stock eaton

Pulley size and boost level: Stock/Stock ~8

Fuel system: 39lb injectors, C&L 95 maf, Ford GT Pumps in Cobra tank, 8AN outlet, PPRV Delete, ,

Tuner: SCT Pro Racer Package/ Jon Lund dyno tune

Other notable mods: Hooker headers and O/R X-pipe into magnaflow catback, 4.10 gears, self ported lower, plenum and t/b, C&L cai, al. driveshaft, fidanza flywheel, spec stage 3 clutch, and tko 600.

RWHP/RWTQ: 442rwhp / 432rwtq
machgsxr is offline   Reply With Quote
Old 04-05-2008, 10:36 PM   #4
Madmax305
Registered User
 
Madmax305's Avatar
 
Join Date: May 2004
Location: SOUTHERN CALIFORNIA
Posts: 1,081
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Stock bottom end: 5.0 stroker

PD unit: KB 2.1

Pulley size and boost level: 3.0 upper, 7.5 lower = 15lbs boost

Fuel system: 60lb injectors, cpr fuel rails, KB BAP, cobra tank, cobra twin pumps, -8 fuel line, HD wiring, Stage 1 FPDM, PRP delete and SCT 2800 maf.

Tuner: RET custom tune, 15*timing, 11.6 a/f street tune for 91 craptane

Other Mods: Bassani headers and catted x pipe, Ford racing cams, port and polish, Accufab single blade TB.

RWHP:560 RWTQ:542, Maybe a 19lb race tune coming soon, to try to keep up with you guys....
__________________
MMR-950 5.0 STROKER
PORT/POLISH-FRPP RACING CAMS
KB 2.1 15LBS 570RWHP 550RWTQ (SAE)
LDC COOLING MOD, DAVIS WP, 8-RIB BELT
TKO 600 .82OD
3.55 GEARS
EATON POSI/31 SPLINE AXLES
COBRA TANK/PUMPS, SCT-2800 MAF, BAP
60LB INJ, FORE FUEL RAILS, -8AN FUEL LINE
BASSANI HEADERS/X-PIPE
CANTON 7QT PAN
MM TUBULAR K-MEMBER/PANHARD BAR
ALUMINUM D.S./FLYWHEEL
BILSTEIN SPORT VALVE COILOVERS
4-PISTON BREMBO CALIPERS/ROTORS
18X9/18X10 CHROME BULLITS/NITTO DR'S
2001 COBRA FRONT COVER
RET Tune

Last edited by Madmax305; 06-27-2008 at 11:01 PM.
Madmax305 is offline   Reply With Quote
Old 04-06-2008, 08:18 AM   #5
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

I say you get a free pass living in California Doyle.:LAUGH:
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 04-11-2008, 03:36 PM   #6
No1Ford
Registered User
 
No1Ford's Avatar
 
Join Date: Apr 2006
Location: MN
Posts: 555
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Stock bottom end: Yes

PD unit: 1.3 Eaton

Pulley size and boost level: 3.10 upper, boost 9LBS

Fuel system: 03/04 cobra setup

Tuner: Diablo hand held

Other notable mods: SLP LT, SLP catlless X, 4.10, JLT CAI.

RWHP/RWTQ: 467RWHP/433RWTQ
__________________
No1Ford is offline   Reply With Quote
Old 05-07-2008, 10:29 PM   #7
TR04MACH
Registered User
 
Join Date: Dec 2005
Location: Herndon, VA
Posts: 541
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Stock bottom end: Yes

PD unit: Unported Eaton

Pulley size and boost level: Stock Upper/Lower 8psi

Fuel system: 39lb Injectors, Cobra Fuel Tank and Pumps, Cobra MAF

Tuner: SCT

Other notable mods: Slp Longtube Headers, Slp Catted X, Slp Loudmouth 2 Catback and Jlt Intake

RWHP/RWTQ: 462 rwhp / 425rwtq STD
__________________
2004 Torch Red Mach 1!
Eaton Swapped 8psi
SLP Longtube Headers
SLP Catted Shorty X
SLP Powerflo Catback
JLT RAI Intake
SCT Tune on 4bank chip
Nitto DR 275/40/17
MM Lower Control Arms
MM Urethane Rack Bushings
Hawk HPS Pads w/ MM brake lines
MM Full Length Subframes
Steeda Tri-ax
Sirius

For Sale!
TR04MACH is offline   Reply With Quote
Old 05-07-2008, 11:05 PM   #8
Derek
Registered User
 
Join Date: Feb 2007
Location: columbus, ohio
Posts: 248
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Stock bottom end: Yes

PD unit: stock Eaton

Pulley size and boost level: stock bout 7.5 psi max

Fuel system: gt pump

Tuner: xcal2

Other notable mods: catless H, flowmasters, 4.10, JLT CAI.

RWHP/RWTQ: 445RWHP/395RWTQ std
__________________
04 Azure Blue 5spd IUP
Eaton swapped
445whp 390tq
12.576@108.25 1.69 60'(without blower)
11.366@124.12 1.62 60'(with blower)
xcal 2, JLT cold air jegs catless H, flowmaster catback, 4.10's, 31 spline diff and mosers, girdle, alum driveshaft and safety loop, b&m ripper, boxed factory cntrl arms

Need to sell going back to stock
Derek is offline   Reply With Quote
Old 06-26-2008, 06:28 PM   #9
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Stock bottom end: No. Fully forged shortblock/9.0:1 compression

PD Unit: Whipple 2.3

Pulley size and boost level: 3.00 upper/4 lb. lower, 25.6 psi

Fuel system: SCT 2400, 60 lb. injectors, 03-04 cobra tank, GT pumps, BAP, wire upgrade, stage II FPDM, PPR delete

Tuner: Chris @ EFILOGICS using SCT software

Other notable mods: 1 3/4 Kooks longtubes, Kooks X-Pipe, Bassani catback, Jan. 05 heads, GT cams, Canton pan and windage tray, Melling billet oil pump, ARP studs thruout, 03-04 Cobra belt system, Tubular K-Member with MM coilovers and Tokito adjustable struts, T-56, Centerforce DFX clutch with Ford Racing steel flywheel, 3.73's with 31 spline rear, custom JLT RAI with 12" filter.

RWHP/RWTQ: 718 RWHP/ 735 RWTQ
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD

Last edited by Scott McClure; 11-25-2010 at 08:38 AM.
Scott McClure is offline   Reply With Quote
Old 06-27-2008, 08:19 PM   #10
Sean88gt
Registered User
 
Join Date: Jun 2008
Location: NE Texas
Posts: 111
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

This is not helping me.
__________________
2003 Azure Blue Mach 1
2006 F-350 King Ranch 4x4
Sean88gt is offline   Reply With Quote
Old 06-27-2008, 11:03 PM   #11
Madmax305
Registered User
 
Madmax305's Avatar
 
Join Date: May 2004
Location: SOUTHERN CALIFORNIA
Posts: 1,081
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Some of you guys are just insane with your numbers!
__________________
MMR-950 5.0 STROKER
PORT/POLISH-FRPP RACING CAMS
KB 2.1 15LBS 570RWHP 550RWTQ (SAE)
LDC COOLING MOD, DAVIS WP, 8-RIB BELT
TKO 600 .82OD
3.55 GEARS
EATON POSI/31 SPLINE AXLES
COBRA TANK/PUMPS, SCT-2800 MAF, BAP
60LB INJ, FORE FUEL RAILS, -8AN FUEL LINE
BASSANI HEADERS/X-PIPE
CANTON 7QT PAN
MM TUBULAR K-MEMBER/PANHARD BAR
ALUMINUM D.S./FLYWHEEL
BILSTEIN SPORT VALVE COILOVERS
4-PISTON BREMBO CALIPERS/ROTORS
18X9/18X10 CHROME BULLITS/NITTO DR'S
2001 COBRA FRONT COVER
RET Tune
Madmax305 is offline   Reply With Quote
Old 06-27-2008, 11:15 PM   #12
shake this
Registered User
 
shake this's Avatar
 
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Great thread for those thinking about going s/c (like me) it's nice having all the numbers and supporting mods in one place.
__________________
Steeda tri axe shifter
MRT H pipe w/Magnaflow cat back exhaust
JLT air intake
PHP intake spacer
Aluminum Driveshaft
SLP line-lock
4.10 gears
Moser axles
welded axle tubes
ET Radials
Dyno 300whp 318wtq n/a

415whp 515wtq NX 125 shot
Someone needs to slap the stupid outa you
shake this is offline   Reply With Quote
Old 07-02-2008, 05:48 PM   #13
Hmbre97
Eaton swapped User
 
Hmbre97's Avatar
 
Join Date: Dec 2005
Location: Austin, TX
Posts: 771
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Stock bottom end: Yes

PD unit: Stiegemeier Stage I Eaton

Pulley size and boost level: Stock Upper/Lower 8psi

Fuel system: 39lb Injectors, Cobra Fuel Tank and Pumps, Cobra MAF

Tuner: SCT via Rick @ Amazon

Other notable mods: Magnaflow catted x-pipe, Magnaflow C/B, JLT CAI, T-56, aluminum driveshaft

RWHP/RWTQ: 466rwhp/423rwtq SAE
__________________
-Herb-
03 Torch Red Mach 1
Photobucket
Hmbre97 is offline   Reply With Quote
Old 07-05-2008, 04:48 PM   #14
lxh89
Registered User
 
lxh89's Avatar
 
Join Date: Jan 2003
Location: Houston, Tx
Posts: 1,530
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Could a moderator make this thread a sticky please?

Thanks,
Tony
__________________
2015 Ruby Red Mustang GT Premium
Bone Stock

03 Oxford White Mach 1 - SOLD
1.72 60',10.932@131.60MPH, 3800# Raceweight
lxh89 is offline   Reply With Quote
Old 07-06-2008, 01:41 AM   #15
Jester
Super Moderator
 
Jester's Avatar
 
Join Date: Sep 2003
Location: Houston (Crosby), Texas
Posts: 6,689
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Done.
__________________
2003 Dark Shadow Gray Mach 1
5.3L Stroker - FR500 Intake - Boss330 Heads
4.56 Gears - Kooks LTs - SCT Tune - Bassani X/Catback


2004 Silver Metallic Cobra
2.3 Whipple - 60lb injectors -Twin FGT Pumps
8 gauge/BAP/FPDM - JLT - Bassani Catted X / Catback - SCT PRP - 4# Lower - 3.50/3.00 Uppers - 19/24 PSI


2017 White Shelby F150
2.9L Whipple

_______________
Jester is offline   Reply With Quote
Old 07-07-2008, 02:38 PM   #16
machgsxr
Registered User
 
machgsxr's Avatar
 
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Those who have stroker motors or built engines, can you please specify your compression ratio?

THanks.
machgsxr is offline   Reply With Quote
Old 07-07-2008, 04:03 PM   #17
Madmax305
Registered User
 
Madmax305's Avatar
 
Join Date: May 2004
Location: SOUTHERN CALIFORNIA
Posts: 1,081
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

9 to 1 cr, 18cc dish pistons.
__________________
MMR-950 5.0 STROKER
PORT/POLISH-FRPP RACING CAMS
KB 2.1 15LBS 570RWHP 550RWTQ (SAE)
LDC COOLING MOD, DAVIS WP, 8-RIB BELT
TKO 600 .82OD
3.55 GEARS
EATON POSI/31 SPLINE AXLES
COBRA TANK/PUMPS, SCT-2800 MAF, BAP
60LB INJ, FORE FUEL RAILS, -8AN FUEL LINE
BASSANI HEADERS/X-PIPE
CANTON 7QT PAN
MM TUBULAR K-MEMBER/PANHARD BAR
ALUMINUM D.S./FLYWHEEL
BILSTEIN SPORT VALVE COILOVERS
4-PISTON BREMBO CALIPERS/ROTORS
18X9/18X10 CHROME BULLITS/NITTO DR'S
2001 COBRA FRONT COVER
RET Tune
Madmax305 is offline   Reply With Quote
Old 07-07-2008, 05:14 PM   #18
Larry Warcup
WEST COAST MACH1
 
Larry Warcup's Avatar
 
Join Date: Nov 2006
Location: Vancouver, BC, Canada
Posts: 325
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Got some good results from my KB Intercooled 2.1 install couple of weeks back:

440 rwhp/400tq @ 8psi boost:



Also installed MGW shifter, 42 lb injectors, MA, Dyno/Diablo tune, KB BoostAPump.

Previous mods include:

4.10 gears
Bassani X-Pipes
FR500 wheels (18")
Yokohama rubber 255/35ZR front 275/35ZR rear
Steeda suspension w/CC plates
Autometer Boost/Fuel gauges

Larry Warcup is offline   Reply With Quote
Old 07-07-2008, 06:43 PM   #19
lxh89
Registered User
 
lxh89's Avatar
 
Join Date: Jan 2003
Location: Houston, Tx
Posts: 1,530
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by machgsxr View Post
Those who have stroker motors or built engines, can you please specify your compression ratio?

THanks.
8.6:1, JE Pistons (17cc dish)

Tony
__________________
2015 Ruby Red Mustang GT Premium
Bone Stock

03 Oxford White Mach 1 - SOLD
1.72 60',10.932@131.60MPH, 3800# Raceweight
lxh89 is offline   Reply With Quote
Old 07-16-2008, 04:46 PM   #20
Grey1
Registered User
 
Grey1's Avatar
 
Join Date: Aug 2002
Location: SE MI
Posts: 25
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

From the setup pic in Larry Warcup's post, it appears the KB 8psi system w/ intercooler eliminates the bottom of the scoop to make room for the supercharger housing and the intercooler coolant tank eliminates any possible duct from the scoop to the air filter.

Are there any options/kits (KB, Eaton, Whipple, etc) that keep the scoop functional? I want to keep the scoop functional since 1) air from completely outside the vehicle will be cooler than air from the fenderwell, and 2) for me at least, the functional shaker makes this car.

Thanks!
__________________
'03 DSG Mach1 w/ Int Upgrade Pkg
Grey1 is offline   Reply With Quote
Old 07-16-2008, 04:54 PM   #21
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:
Originally Posted by Grey1 View Post
From the setup pic in Larry Warcup's post, it appears the KB 8psi system w/ intercooler eliminates the bottom of the scoop to make room for the supercharger housing and the intercooler coolant tank eliminates any possible duct from the scoop to the air filter.

Are there any options/kits (KB, Eaton, Whipple, etc) that keep the scoop functional? I want to keep the scoop functional since 1) air from completely outside the vehicle will be cooler than air from the fenderwell, and 2) for me at least, the functional shaker makes this car.

Thanks!
No, no options. Once you eliminate the lower half of the shaker there aren't any options. Getting cold air outside the engine compartment isn't always the answer. If I had run a CAI instead of my RAI I would have made 40 rwhp less more than likely.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 07-16-2008, 05:26 PM   #22
Madmax305
Registered User
 
Madmax305's Avatar
 
Join Date: May 2004
Location: SOUTHERN CALIFORNIA
Posts: 1,081
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

What Scott said is true. I started with the JLT CAI. I switched to the RAI and removed the maf screen and gained 40 hp. The only function left for the shaker is that it will put cool out side air on top of the supercharger. I'm not sure how much of an effect this will really have on the supercharger....
__________________
MMR-950 5.0 STROKER
PORT/POLISH-FRPP RACING CAMS
KB 2.1 15LBS 570RWHP 550RWTQ (SAE)
LDC COOLING MOD, DAVIS WP, 8-RIB BELT
TKO 600 .82OD
3.55 GEARS
EATON POSI/31 SPLINE AXLES
COBRA TANK/PUMPS, SCT-2800 MAF, BAP
60LB INJ, FORE FUEL RAILS, -8AN FUEL LINE
BASSANI HEADERS/X-PIPE
CANTON 7QT PAN
MM TUBULAR K-MEMBER/PANHARD BAR
ALUMINUM D.S./FLYWHEEL
BILSTEIN SPORT VALVE COILOVERS
4-PISTON BREMBO CALIPERS/ROTORS
18X9/18X10 CHROME BULLITS/NITTO DR'S
2001 COBRA FRONT COVER
RET Tune
Madmax305 is offline   Reply With Quote
Old 09-09-2008, 04:31 PM   #23
Mister L
Don't squeeze the Charmin
 
Mister L's Avatar
 
Join Date: Sep 2003
Location: OKC, OK
Posts: 1,036
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Haven't dynoed yet, date is 12 September. Can you guys give me an estimate of what I should expect with the following?

03 Mach motor with 9 to 1 pistons
FR500 cams/springs/valves
ported heads
stock throttle body
60 pound injectors
Twin GT superpumps and modified FPDM
Midlength headers with offroad Prochamber
Whipple 140AX with 3.5 inch pulley (13psi boost)

What numbers would you think it will put down?
__________________
Mister L
03 Black 6-speed

Last edited by Mister L; 09-09-2008 at 04:58 PM.
Mister L is offline   Reply With Quote
Old 09-09-2008, 04:49 PM   #24
ponygt65
Registered User
 
ponygt65's Avatar
 
Join Date: Jun 2004
Location: Madera, CA
Posts: 7,687
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

I would also like to see any follow up on blowing motors. IF anyone blows their motor and rebuild's I'd like to see that posted. Reason for blow would be best.

(In both FI stickies)
__________________
Current Stable:
NO stangs.....DON'T F'ING remind me.

Previous stangs:
2003 Mineral Grey Cobra Vert
1965 Factory GT K Code Coupe - mostly original and numbers matching. 14.9 (best) GONE BUT NOT FORGOTTEN!!
2003 MACh 1 AB - MINE!..SLP LM1s, PHP Spacer, and a CAI, that wont' stop whistling.
2004 MACh 1 DSG - PHP spacer, BOrla Stingers, K and N CAI, Tune, X-pipe, 1" 1-piece raised shaker...yadda yadda.
ponygt65 is offline   Reply With Quote
Old 09-09-2008, 05:13 PM   #25
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Marty, with 13 lbs. of boost I think you'll be disappointed. I'm going to guess 540 rwhp 490 rwtq. A 4lb. lower would do wonders for you. That Whipple wants to be spun a little more.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:36 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<